Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Zr/Zn Nanocomposites Modified Ceramsite Enhances Phosphorus Removal from Agricultural Drainage Water.

Performance of an integrated sediment interceptor in removing phosphorus from agricultural drainage water

A Novel Strategy to Prepare ZnO/PbS Heterostructured Functional Nanocomposite Utilizing the Surface Adsorption Property of ZnO Nanosheets

Simultaneous P Release and Recovery from Fish Farm Sludge Using a Zr-modified Magnetic Adsorbent Treated by Ultrasound

Zirconium-modified biochar as the efficient adsorbent for low-concentration phosphate: performance and mechanism

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Designing ZIF-8/hydroxylated MWCNT nanocomposites for phosphate adsorption from water: Capability and mechanism

Performance of a new low-cost Zn/Fe-layered double hydroxide-modified ceramsite for the removal of P from agricultural runoff

Zirconium Component Modified Porous Nanowood for Efficient Removal of Phosphate from Aqueous Solutions

New Insights into Nanocomposite Adsorbents for Water Treatment: A Case Study of Polystyrene-Supported Zirconium Phosphate Nanoparticles for Lead Removal

Preparation of high specific surface area Zn/Al/Zr LDH@HTCC for enrichment and recovery of phosphorus from water

[Fabrication of a Biomass-Based Hydrous Zirconium Oxide Nanocomposite for Advanced Phosphate Removal].

Metastable Nano-Zirconium Phosphate Inside Gel-Type Ion Exchanger for Enhanced Removal of Heavy Metals.

Preferable Adsorption of Nitrogen and Phosphorus from Agricultural Wastewater Using Thermally Modified Zeolite–Diatomite Composite Adsorbent

Fabrication of a Biomass-Based Hydrous Zirconium Oxide Nanocomposite for Preferable Phosphate Removal and Recovery

Phosphate removal by ZIF-8@MWCNT hybrids in presence of effluent organic matter: Adsorbent structure, wastewater quality, and DFT analysis

Synthesis of magnesium-modified ceramsite from iron tailings as efficient adsorbent for phosphorus removal

Metastable Zirconium Phosphate under Nanoconfinement with Superior Adsorption Capability for Water Treatment

Zinc oxide – mesoporous silica nanocomposite: preparation, characterisation and application in water treatment for lead, cadmium and chromium removal

Fabrication Of A New Hydrous Zr(Iv) Oxide-Based Nanocomposite For Enhanced Pb(Ii) And Cd(Ii) Removal From Waters