Abstract:A combination of a triboelectric nanogenerator (TENG) and natural wood presents a sustainable approach toward a smart home due to the wood's biodegradability, low cost, and abundant resource. Major challenges for achieving a cellulose-based TENG are the brittleness, low crystallinity, and low surface charge density. We demonstrated a facile method to process and modify natural wood to satisfy application requirements. The treated wood has both good flexibility and tensile mechanical properties. After pressing, its crystallinity also saw a big increase, with the figure almost tripled. A further surface modification was inspired by dyeing technology. The cellulose on the surface of wood was cationically modified by 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC) via the solution-immersion method. After modification, the surface potential increased two times compared to that of the unmodified one. Density functional theory was used to calculate the absorption energy between cellulose molecules and CHPTAC to further verify the feasibility of the chemical modification. Larger differences between the two tribo-layers in terms of the energy level produce a high electrostatic charge flow. The modified pressed wood-based TENG can generate a peak current of 9.74 μA, a voltage of 335 V, and a transferred charge density of 71.45 μC/m2 through contact electrification. A concept of a self-powered and sensing smart floor integrated with this modified cellulose-based TENG was further developed to provide real-time motion monitoring for a smart home. This work not only removes the wood brittleness but also puts forward a novel method to improve the wood surface charge density from an interdisciplinary perspective, which is crucial to facilitate the application of natural wood in the nanogenerator area.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c08095.Contact angle of different veneers; crystallinity of the veneer in different stages; statistical data from the Gauss-fitted XPS results of C 1s peaks of NW and MPW showing the peak position and relative percentage of different bonds; two possible reaction routes of CHPTAC and cellulose molecule in an alkaline environment; power density comparison of this work with other studies; schematic diagram of the molecular structure of two reaction routes; list of isolated energy and absorption energy of the single molecular and complex structure; diagram of the full-wave rectifier; zoom-in view of the 47 μF capacitor charging process; and MC-TENG-based smart floor sensor structure (PDF)MC-TENG output current (MP4)MC-TENG output voltage (MP4)47 μF capacitor lighting up a hygrothermograph (MP4)This article has not yet been cited by other publications.

Enhanced Triboelectric Nanogenerator Based on a Hybrid Cellulose Aerogel for Energy Harvesting and Self-Powered Sensing

A Triboelectric Nanogenerator Based on Waste Tea Leaves and Packaging Bags for Powering Electronic Office Supplies and Behavior Monitoring

Biodegradable, conductive, moisture-proof, and dielectric enhanced cellulose-based triboelectric nanogenerator for self-powered human-machine interface sensing

Improving the Output Performance of Bacterial Cellulose-Based Triboelectric Nanogenerators by Modulating the Surface Potential in a Simple Method

Bacterial cellulose nanofiber triboelectric nanogenerator based on dielectric particles hybridized system

All-Cellulose Nanofiber-Based Sustainable Triboelectric Nanogenerators for Enhanced Energy Harvesting

Improved Electrical Output Performance of Cellulose‐Based Triboelectric Nanogenerators Enabled by Negative Triboelectric Materials

Chemical Cross-Linking Cellulose Aerogel-Based Triboelectric Nanogenerators for Energy Harvesting and Sensing Human Activities

Eco-friendly and recyclable all cellulose triboelectric nanogenerator and self-powered interactive interface

Cellulose/BaTiO3 Aerogel Paper Based Flexible Piezoelectric Nanogenerators and the Electric Coupling with Triboelectricity

Enhancing energy harvesting performance and sustainability of cellulose-based triboelectric nanogenerators: Strategies for performance enhancement

Dyeing-Inspired Sustainable and Low-Cost Modified Cellulose-Based TENG for Energy Harvesting and Sensing

Emerging cellulosic materials for sustainable mechanosensing and energy harvesting devices: Advances and prospect

Dielectric Modulated Cellulose Paper/PDMS‐Based Triboelectric Nanogenerators for Wireless Transmission and Electropolymerization Applications

High-Performance Flexible Triboelectric Nanogenerator Based on Environmentally Friendly, Low-Cost Sodium Carboxymethylcellulose for Energy Harvesting and Self-Powered Sensing

Low-cost, environmentally friendly and high-performance cellulose-based triboelectric nanogenerator for self-powered human motion monitoring

Ag–Cellulose Hybrid Filler for Boosting the Power Output of a Triboelectric Nanogenerator

Biodegradable, transparent, and antibacterial alginate-based triboelectric nanogenerator for energy harvesting and tactile sensing

High-performance triboelectric nanogenerator based on chitin for mechanical-energy harvesting and self-powered sensing

Catechin-induced cellulose: a new material for harvesting triboelectricity

A Green Triboelectric Nano-Generator Composite of Degradable Cellulose, Piezoelectric Polymers of PVDF/PA6, and Nanoparticles of BaTiO3