Abstract:Existing obstacle avoidance systems do not consider the situation of hollowed-out obstacles. Therefore, in this paper, we design an assistive cane with visual odometry based on these requirements of the blind to aid them in attaining safe indoor navigation. The proposed device is portable, compact and adaptable. The assistive cane with visual odometry can be used not only to directly detect obstacles, but also to draw the attention of people around, providing multiple protection for the blind. In order to optimize the device parameters, we select the height of the camera and the speed of the voice broadcast as factors to design a complete factorial design, aiming to explore the parameter level that can make the passing time shortest and the success rate of obstacle avoidance highest. We invited two visually impaired people and two blindfolded students with normal vision as the experimental subjects. Each subject was required to conduct the experiments under nine combinations of device parameters. The subjects tried to avoid obstacles according to the voice prompts. The passing time and the success rate of obstacle avoidance were recorded. The experimental results show that the broadcast speed causes the significant effect to the success rate and both the two factors affect the passing time. In addition, we discuss the results of different subjects’ response surfaces and perceptual patterns and get the conclusion that different visual perceptual patterns, namely route representation and two different survey representations, have a certain impact on the setting of the optimal parameter level and the optimal passing time. The congenitally blind subject with route representation has the shortest optimal passing time in an unfamiliar environment, and the camera height should be set at the center of the hollowed-out obstacle, while the results are somewhat different for the acquired visual impairment subjects and the blindfolded normal vision subjects with survey representation. The camera height should be set between the center and the upper position of the obstacle. In summary, the camera height should be set at the center of the hollowed-out barrier and the broadcast speed should be set at the highest level. At the same time, the device parameters should be adjusted appropriately according to the visual perception pattern of users. Further researches are needed to analyze the perceptual patterns in depth.

A Smart Obstacle Avoiding Technology Based on Depth Camera for Blind and Visually Impaired People

Long-Range Traversability Awareness and Low-Lying Obstacle Negotiation with RealSense for the Visually Impaired

Assisting the Visually Impaired: Multitarget Warning Through Millimeter Wave Radar and RGB-depth Sensors.

Expanding the Detection of Traversable Area with RealSense for the Visually Impaired

An Environmental Perception and Navigational Assistance System for Visually Impaired Persons Based on Semantic Stixels and Sound Interaction

Glass Detection and Recognition Based on the Fusion of Ultrasonic Sensor and RGB-D Sensor for the Visually Impaired

Unifying Terrain Awareness Through Real-Time Semantic Segmentation

Wearable Travel Aid for Environment Perception and Navigation of Visually Impaired People

When Ultrasonic Sensors and Computer Vision Join Forces for Efficient Obstacle Detection and Recognition

Smartphone Based Outdoor Navigation and Obstacle Avoidance System for the Visually Impaired.

Obstacle avoidance using stereo vision and depth maps for visual aid devices

Detect and Approach: Close-Range Navigation Support for People with Blindness and Low Vision

A Real-Time Obstacle Detection Algorithm for the Visually Impaired Using Binocular Camera

Virtual-Blind-Road Following Based Wearable Navigation Device for Blind People

Sensing and Navigation of Wearable Assistance Cognitive Systems for the Visually Impaired

HIDA: Towards Holistic Indoor Understanding for the Visually Impaired via Semantic Instance Segmentation with a Wearable Solid-State LiDAR Sensor

Smart Guiding Glasses for Visually Impaired People in Indoor Environment

Design and Optimization of an Assistive Cane with Visual Odometry for Blind People to Detect Obstacles with Hollow Section

A wearable assistive system for the visually impaired using object detection, distance measurement and tactile presentation

Wearable Visually Assistive Device for Blind People to Appreciate Real-world Scene and Screen Image

A Wearable Navigation Device for Visually Impaired People Based on the Real-Time Semantic Visual SLAM System