Abstract:Despite the broad range of navigation, positioning, and timing services offered by the global navigation satellite system (GNSS), its signals are vulnerable to blockage and interference, leading to a degraded performance or even unavailability. In contrast to GNSS, ground-based navigation systems exhibit better layout flexibility and more efficient terrain adaptability in shaded areas, with their additional advantages of accurate station coordinates and the absence of ionospheric delay effects enabling precise point positioning. However, accurate inter-station time synchronization is thought to be necessary for the ground-based precise point positioning. Locata utilizes a proprietary TimeLoc technology for tight time synchronization, allowing the clock difference in the carrier phase measurement equation to be ignored. However, for other ground-based navigation systems, accurate time synchronization requires accurate calibration of equipment delays and thus significantly increases the difficulty of engineering implementation. Herein, we propose a new precise point positioning method that does not rely on accurate inter-station time synchronization. According to this method, the uncalibrated clock difference and the integer carrier phase ambiguity are combined into a new ambiguity parameter, with the ambiguity and position coordinates subsequently solved in two steps. Further, in order to overcome the limitations of the Locata on-the-fly algorithm and the conventional “known-point initialization” method, a new “dynamic key point initialization” method is proposed. Finally, a simulation test and an indoor field trial are conducted, demonstrating that precise point positioning can be achieved by sharing a single clock source without relying on accurate inter-station time synchronization. An atomic clock is not needed and an inexpensive crystal oscillator is sufficient to act as the shared clock. The results of indoor positioning tests reveal real-time centimeter-level accuracy.

Landing Point Location Algorithm Based on Asynchronous Time Difference of Arrival (ATDOA) Method

Research on Endpoint Detection Algorithm in High Altitude Explosion Point Location Technology

A Drone Localization System Based On Multiple Time Delays Fusion

Landing Point Location Algorithm Without Velocity Measurement in Target Range

Research on Acoustic Source Localization Using Time Difference of Arrival Measurements

A New Method for Arrival Time Determination of Impact Signal Based on Hht and Aic

Effective Audio Signal Arrival Time Detection Algorithm for Realization of Robust Acoustic Indoor Positioning

Ballistic Fitting Impact Point Prediction Based on Improved Crayfish Optimization Algorithm

High-Precision Joint TDOA and FDOA Location System

Underwater High Precision Wireless Acoustic Positioning Algorithm Based on L-p Norm

Research of Projectile Impact Point Positioning Skill Based on Wireless Sensor Network

A single-site positioning method based on TOA and DOA estimation using virtual stations in NLOS environment

A Two-Stage Aerial Target Localization Method Using Time-Difference-of-Arrival Measurements with the Minimum Number of Radars

Acoustic emission positioning with multi-scale and multi-sensor constraints

Ultra-fast calculation method of incident angle based on underwater acoustic round-trip positioning

A Gradient Vector Descent Strategy for Localizing Acoustic Emission Sources in Discontinuous Structures with a Hole

LEO Satellite Aided Positioning of Interference Source

Impact point location based on seismic wave analysis

A Distributed Radio Beacon/IMU/Altimeter Integrated Localization Scheme with Uncertain Initial Beacon Locations for Lunar Pinpoint Landing

Single-Site 3-D Positioning in Multipath Environments Using DOA-Delay Measurements

Precise point positioning for ground-based navigation systems without accurate time synchronization