Abstract:Piezoelectric poly(vinylidene fluoride) (PVDF) polymer exhibits the flexible characteristic, however, a piezo-generator based on the PVDF polymer normally shows low power density because of its low piezoelectric coefficient. Here, we report a fundamental synergistic strategy to prepare PVDF polymer nanocomposite for enhancing electromechanical coupling performance and improving its energy density, including (i) the mechanically directional stress field (MDSF) fabrication of PVDF nanocomposite doped with polar Pb(Zr,Ti)O 3 (PZT) ceramic nanoparticles via high-energy ball milling, (ii) introduction of micro-cavities holding polar nanoparticles, and (iii) floating electrode (Ag) films spaced uniformly inside the polymer nanocomposite. The investigations reveal that the MDSF fabrication can induce ordered, chain-shape nanocrystalline fibers with a high β-crystal phase, which makes 42 % contribution to the piezoelectricity; while the micro-cavities and floating electrode films after poling exhibit a strong electret effect, which further make 18 % and 27 % contributions, respectively, to the piezoelectricity. This multiple-mechanism synergistic effect results in a much higher piezoelectric coefficient d 33 increased from 4 pC N −1 for a pure PVDF (without bearing a uniaxial stretching) to 33 pC N −1 for the nanocomposite. It further dramatically increases to 228 pC N −1 , a giant apparent piezoelectric charge coefficient d 33 * , for a 3D-printed 7-layer nanocomposite with 360 μm in thickness. An energy harvester (EH) based on the PVDF nanocomposite generates a record high peak power density of 13.2 mW cm −2 and the load power density of 5.46 mW cm −2 under a dynamic pressure of 255 kPa at the frequency of 5 Hz, which is near two orders of magnitude higher than that of a conventional PVDF polymer EHs. The fabricated flexible EH can even directly light up 46 LEDs in real-time or power a blind-man reading system when touching it. This work is of great significance in enlightening future flexible piezoelectronic designs.

3D-Printed Flexible PVDF-TrFE Composites with Aligned BCZT Nanowires and Interdigital Electrodes for Piezoelectric Nanogenerator Applications

Flexible PVDF-TrFE Nanocomposites with Ag-decorated BCZT Heterostructures for Piezoelectric Nanogenerator Applications

Piezoelectric Nanogenerators Based on Electrospun PVDF-Coated Mats Composed of Multilayer Polymer-Coated BaTiO3 Nanowires

3D Printing Enhanced Piezoelectricity of MXene/P(VDF-TrFE) Composites for Energy Harvesting and Force Sensing

Enhanced energy density in piezoelectric PVDF-polymer nanocomposite via multiple mechanism synergetic action

Porous, multi-layered piezoelectric composites based on highly oriented PZT/PVDF electrospinning fibers for high-performance piezoelectric nanogenerators

Interface-engineered composite nanofibers for boosting piezoelectric outputs of polymeric nanogenerators

Flexible Energy Harvesting Polymer Composites Based on Biofibril-Templated 3-Dimensional Interconnected Piezoceramics

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

High Output Piezoelectric Composite Nanogenerators Composed Of Fapbbr(3)-Pvdf

Flexible Composites with Rare-Earth Element Doped Polycrystalline Particles for Piezoelectric Nanogenerators

Lead-free, High-Current Output Piezoelectric Nanogenerators Using Three-Dimensional Interdigitated Electrodes

Enhanced Output-Performance of Piezoelectric Poly(vinylidene Fluoride Trifluoroethylene) Fibers-Based Nanogenerator with Interdigital Electrodes and Well-Ordered Cylindrical Cavities

Electrospun Polyvinylidene Fluoride Nanogenerator with Hydrophobic Properties and Enhanced Energy Harvesting for Wearable and Wireless Sensing

The benefits of combining 1D and 3D nanofillers in a piezocomposite nanogenerator for biomechanical energy harvesting

Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites

Three-dimensional polymer-nanoparticle-liquid ternary composite for ultrahigh augmentation of piezoelectric nanogenerators

Enhanced Energy Harvesting Performances of Flexible Piezoelectric Nanocomposite Based on CNTs@PZT Nanofibers Network

Development of environmental-friendly BZT–BCT/P(VDF–TrFE) composite film for piezoelectric generator

Enhanced Piezoelectric Energy Harvester by Employing Freestanding Single‐Crystal BaTiO3 Films in PVDF‐TrFE Based Composites