Abstract:The mechanical properties of live cells are important for maintaining cell physiological functions. Many types of cells such as cancer cells, malaria-infected cells, and cells with progeria have shown altered mechanical properties. Measurement of cell mechanics becomes useful for understanding cell physiology and potentially for diagnosing diseases. A number of techniques have been applied to measuring single cell mechanical properties, among which Atomic Force Microscopy (AFM) is a popular method. However, since this approach has an intrinsic problem of lacking contact area information, the elastic property were commonly extracted by fitting the force-displacement curve acquired from AFM indentation using a Hertzian contact model, which leads to inaccurate measurement as cell-probe contact violates the assumptions of Hertzian model (rigid body contact, no adhesion). An ideal approach to quantify cell's elastic property is direct compression or tensile testing which does not rely on any contact mechanics models with assumptions that cells might not be eligible for. Here, we quantified the elastic property of live cells directly from stress-strain curves by compression test using an integrated system of a confocal microscope and an AFM with a tip-less cantilever. The contact area was measured by confocal microscope and quantified by image processing, then used to convert force to stress. The Young's modulus of T24 cells was determined directly from the slope of stress-strain curves as 0.88±0.12 kPa. In comparison, we also applied previous indentation method and contact mechanics model fitting (Hertz model, Kevin-Voigt model, Standard Linear Solid model, all with Hertzian contact assumptions). The results obtained through each model were 1.54±0.21 kPa, 2.30±0.448 kPa, 1.80±0.32 kPa, respectively (pairwise P<0.05); and the Young's modulus from the three models showed error of 78%±26%, 164%±50%, 105%±21%, compared with our direct stress-strain characterization of the same 10 cells.

Mechanical Force Characterization of Living Cells based on Needle Deformation

Mechanical Force Estimation Based on Visual Cell Deformation and Improved Point-Load Model

Probing Local Cellular Mechanics by Atomic Force Microscopy with Modified Spherical Tip

Direct Characterization of Stress-Strain Relationship for Quantifying Single Cell Elasticity

Mechanical characterization of single cells based on microfluidic techniques

Nanodiamond-based spatial-temporal deformation sensing for cell mechanics

DNA-Based Mechanical Sensors for Cell Applications

Glass microneedles for force measurements: a finite-element analysis model

Advances in Methods and Applications for The Detection of Single Cell Mechanical Properties

Molecular Force Sensors for Biological Application

Nano needle with buffering beam for single cell stiffness measurement by nanorobotic manipulators inside ESEM

Deformable microlaser force sensing

Efficient Single-Cell Mechanical Measurement by Integrating a Cell Arraying Microfluidic Device with Magnetic Tweezer.

Mechanical Behavior Study of Single Cell Contraction by Digital Image Correlation Technique

Characterization of 3D Printed Stretching Devices for Imaging Force Transmission in Live-Cells

In Situ Mechanical Characterization of the Cell Nucleus by Atomic Force Microscopy

Automated Cell Mechanical Characterization by On-Chip Sequential Squeezing: From Static to Dynamic

Simultaneous Measurement of Multiple Mechanical Properties of Single Cells Using AFM by Indentation and Vibration

Multiparameter Mechanical Phenotyping for Accurate Cell Identification Using High-Throughput Microfluidic Deformability Cytometry

Nanomechanical and topographical imaging of living cells by atomic force microscopy with colloidal probes

Analysis of Red Blood Cell Deformability Using Parallel Ladder Electrodes in a Microfluidic Manipulation System