Abstract:With the intensification of global environmental pollution and resource scarcity, hydrogen has garnered significant attention as an ideal alternative to fossil fuels due to its high energy density and nonpolluting nature. Consequently, the urgent development of electrocatalytic water-splitting electrodes for hydrogen production is imperative. In this study, a superwetting selenide catalytic electrode with a peony-flower-shaped micronano array (MoS2/Co0.8Fe0.2Se2/NixSey/nickel foam (NF)) was synthesized on NF via a two-step hydrothermal method. The optimal catalytic activity of cobalt-iron selenide was achieved by adjusting the Co/Fe ratio. The intrinsic catalytic activity of the electrodes was enhanced by incorporating transition metal selenides, which then served as a precursor for the subsequent loading of MoS2 nanoflowers on the surface to fully expose the active sites. Furthermore, the superwetting properties of the electrode accelerated electrolyte penetration and electron/mass transfer, while also facilitating bubble detachment from the electrode surface, thereby preventing "bubble shielding effect". This resulted in superior oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance, as well as overall water splitting capabilities. In a 1.0 M KOH solution, the electrode required only 166 and 195 mV overpotential to achieve a current density of 10 mA cm-2 for OER and HER, respectively. When functioning as a bifunctional catalytic electrode, only 1.60 V of voltage was necessary to drive the electrolyzer to reach a current density of 10 mA cm-2. Moreover, laboratory simulations of wind and solar energy-driven water splitting validated the feasibility of establishing a sustainable energy-to-hydrogen production chain. This work provides new insights into the preparation of low-overpotential, high-catalytic-activity superhydrophilic and underwater superaerophobic catalytic electrodes by rationally adjusting elemental ratios and exploring changes in electrode surface wettability.

Engineered Superhydrophilic/Superaerophobic Array Electrode Composed of NiMoO<sub>4</sub>@NiFeP for High-Performance Overall Water/Seawater Splitting

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

Electrodeposition of NiFe-layered double hydroxide layer on sulfur-modified nickel molybdate nanorods for highly efficient seawater splitting

NiFe Layered Double Hydroxide/FeOOH Heterostructure Nanosheets As an Efficient and Durable Bifunctional Electrocatalyst for Overall Seawater Splitting

Fe-Incorporated Ni/MoO2 Hollow Heterostructure Nanorod Arrays for High-Efficiency Overall Water Splitting in Alkaline and Seawater Media.

Self-supported Ni<sub>3</sub>S<sub>2</sub>@Ni<sub>2</sub>P/MoS<sub>2</sub> heterostructures on nickel foam for an outstanding oxygen evolution reaction and efficient overall water splitting

Sandwich structured Ni<sub>3</sub>S<sub>2</sub>-MoS<sub>2</sub>-Ni<sub>3</sub>S<sub>2</sub>@ Ni foam electrode as a stable bifunctional electrocatalyst for highly sustained overall seawater splitting

Superhydrophilic and Underwater Superaerophobic Dual-Function Peony-Shaped Selenide Micro-nano Array Self-Supported Electrodes for High-Efficiency Overall Water Splitting Driven by Renewable Energy

Self-supported Bifunctional W-MoS2/FeNi2S4/NF Electrodes with Superhydrophilicity and Superaerophobicity Surface for Intermittent Energy-Driven Electrocatalytic Overall Water Splitting

Amorphous Ni–Fe–Mo Suboxides Coupled with Ni Network as Porous Nanoplate Array on Nickel Foam: A Highly Efficient and Durable Bifunctional Electrode for Overall Water Splitting

Porous Ni−Mo−S Nanowire Network Film Electrode As a High‐Efficiency Bifunctional Electrocatalyst for Overall Water Splitting

Hierarchical Superhydrophilic/superaerophobic CoMnP/Ni2P Nanosheet-Based Microplate Arrays for Enhanced Overall Water Splitting

Self-supported Co9S8-Ni3S2-CNTs/NF Electrode with Superwetting Multistage Micro-Nano Structure for Efficient Bifunctional Overall Water Splitting.

Hierarchically Porous Urchin-Like Ni2P Superstructures Supported on Nickel Foam As Efficient Bifunctional Electrocatalysts for Overall Water Splitting

Self-supported Ni3S2@Ni2P/MoS2 heterostructures on nickel foam for an outstanding oxygen evolution reaction and efficient overall water splitting

Integrating Amorphous Molybdenum Sulfide Nanosheets with a Co<sub>9</sub>S<sub>8</sub>@Ni<sub>3</sub>S<sub>2</sub> Array as an Efficient Electrocatalyst for Overall WaterSplitting

Fabrication of NiC/MoC/NiMoO4 Heterostructured Nanorod Arrays as Stable Bifunctional Electrocatalysts for Efficient Overall Water Splitting

High-performance Multidimensional-Structured N-doped Nickel Modulated Mo2N/FeOxNy Bifunctional Electrocatalysts for Efficient Alkaline Seawater Splitting

Sandwich structured Ni3S2-MoS2-Ni3S2@Ni foam electrode as a stable bifunctional electrocatalyst for highly sustained overall seawater splitting

Engineering FeOOH/Ni(OH) 2 Heterostructures on Ni 3 S 2 Surface to Enhance Seawater Splitting

Interfacial Electronic Redistribution via Anionic Modulator for Superb and Highly Stable Water/Seawater Oxidation