Abstract:Two-dimensional direct numerical simulations are performed to explore the effects of rough surfaces on the temperature fields, heat transport, and zonal flow in the annular centrifugal Rayleigh-B & eacute;nard convection (ACRBC) with cold inner and hot outer cylinders co-rotating axially, up to a Rayleigh number of Ra = 4.7 x 10 9 . Three combinations of roughness are considered, that is, two rough surfaces (Case A), rough-inner/smoothouter (Case B) and smooth-inner/rough-outer (Case C). It is shown that, the rough walls cause a bias in the temperature fields towards the values set on the rough walls at high Ra , while have a minimal impact at low Ra . This effect can be attributed to the rough walls promoting the generation and detachment of plumes, which act as the primary heat carriers in turbulent convective heat transfer. Furthermore, the presence of rough surfaces leads to enhanced heat transport at high Rayleigh numbers. Notably, two universal regimes are distinguished by the critical Rayleigh number Ra c approximate to 10 9 : in regime I, where roughness elements protrude through the thermal boundary layer (BL), heat transport is significantly enhanced, resulting in a considerable increase in scaling exponent; in regime II, the scaling exponent reaches a saturation point, returning to a value similar to the smooth case. Similar findings are also observed in the classical Rayleigh-B & eacute;nard convection (Zhu et al., 2017). The decrease in scaling exponent can be attributed to the intense mixing caused by secondary vortices within the roughness elements, leading to a thin and uniformly distributed thermal BL along the rough surfaces, resembling the behavior observed in the smooth case. It is also found that roughness on the outer wall promotes the emergence of zonal flow, while roughness on the inner wall weakens it. These findings provide valuable insights into the effect of wall roughness on temperature fields, heat transport, and zonal flow in ACRBC.

Effects of Isothermal-Adiabatic Boundary Conditions on the Transition Characteristics in Two-Dimensional Turbulent Rayleigh–Bénard Convection

Effects of Asymmetric Rough Boundaries on Turbulent Rayleigh-Bénard Convection

Scaling Transition of Thermal Dissipation in Turbulent Convection

Turbulent boundary layers in thermal convection at moderately high Rayleigh numbers

Transition to the Ultimate Regime in Two-Dimensional Rayleigh-Bénard Convection

A Comparison of Turbulent Thermal Convection Between Conditions of Constant Temperature and Constant Flux

Effects of Rough Surfaces on Annular Centrifugal Rayleigh–Bénard Convection

Statistics of Velocity and Temperature Fluctuations in Two-Dimensional Rayleigh-Bénard Convection.

On non-Oberbeck–Boussinesq effects in Rayleigh–Bénard convection of air for large temperature differences

Bounds on Rayleigh-Benard convection with general thermal boundary conditions. Part 1. Fixed Biot number boundaries

Sidewall effects in Rayleigh-Bénard convection

Laminar to turbulent flow transition inside the boundary layer adjacent to isothermal wall of natural convection flow in a cubical cavity

Boundary Layer Fluctuations and Their Effects on Mean and Variance Temperature Profiles in Turbulent Rayleigh-Benard Convection

Vortex Structure and Small Scale Characteristics in Turbulent Rayleigh–Bénard Convection with Mixed Isothermal–adiabatic Bottom Boundary

Effect of Gap Length and Partition Thickness on Thermal Boundary Layer in Thermal Convection.

Heat transfer and flow structure in centrally-confined 2-D Rayleigh-Bénard convection

Statistics of Heat Transfer in Two-Dimensional Turbulent Rayleigh-Bénard Convection at Various Prandtl Number.

Two-dimensional Rayleigh-Bénard convection without boundaries

Bounds on Rayleigh-Bénard convection with imperfectly conducting plates

Eccentricity Effect on Bifurcation and Dual Solutions in Transient Natural Convection in a Horizontal Annulus

Heat Transport in Rayleigh–Bénard Convection with Linear Marginality