Abstract:How to realize the synergistic optimization of electrical–thermal–mechanical properties of thermoelectric materials is a key challenge. Using the Bi0.5Sb1.5Te3 nanoparticle as a mixed agent provides an effective way to address this challenge. Here, Bi0.5Sb1.5Te3/In0.25Co4Sb12 nanocomposites with different contents of Bi0.5Sb1.5Te3 nanoparticles were successfully prepared by ultrasonic dispersion combined with spark plasma sintering. Phase and microstructure characterization presented that Te nanoparticles were precipitated from Bi0.5Sb1.5Te3 during the SPS sintering process. Transport measurement results showed that the electrical conductivity was increased due to the increased carrier concentration induced by the charge transfer between Te nanoparticles and the matrix. The Seebeck coefficient was also increased due to the selected electron scattering and increased scattering factor. The lattice thermal conductivity was dramatically suppressed because of the enhanced phonon scattering induced by the Bi0.5Sb1.5Te3 nanoparticles and in situ-precipitated Te nanoparticles and increased dislocations. As a result, a higher average ZT value of 1 was obtained in the range of 300–700 K by the decoupling of the electrical and thermal transport properties for the nanocomposite with 0.1 wt % of Bi0.5Sb1.5Te3 nanometer suspension. Furthermore, the flexural strength, fracture toughness, and hardness of the nanocomposites were also improved significantly. This work demonstrates that using the Bi0.5Sb1.5Te3 nanoparticle as a mixed agent can realize the synergistic optimization of electrical–thermal–mechanical properties of the In-filled CoSb3 thermoelectric material.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03351?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03351</a>.Detailed methods and characterization; schematic diagram of the test for flexural strength and fracture toughness; FESEM images of BST02 and BST03 samples; interface band bending away from the interface induced by the charge transfer; electric and thermal transport properties and ZT values of nanocomposites as a function of BST content at 300, 650, and 800 K; hardness of nanocomposites as a function of BST content at 300 K; and electrical transport properties and scattering factors of nanocomposites at room temperature (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03351/suppl_file/am1c03351_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of Multiwall Carbon Nanotubes on the Thermoelectric Properties of BiSbTe Based Composites

Effect of Uniform Dispersion of Single-Wall Carbon Nanotubes on the Thermoelectric Properties of BiSbTe-Based Nanocomposites

Processing and Thermal Properties of Multiwall Carbon Nanotube/Bismuth Antimony Telluride Composites for Nuclear Energy Applications

Enhanced Thermoelectric Performance of Bi2Te3 Through Uniform Dispersion of Single Wall Carbon Nanotubes

Thermoelectric Properties of PbTe Based Single-Walled Carbon Nanotube (SWCNT) Composites

Enhanced Thermoelectric Performance of Bi2Te3 Based Graphene Nanocomposites

High thermoelectric performance in the n-type Bi2S3/f-MWCNTs nanocomposites prepared by hydrothermal method

Bismuth Telluride Nanotubes and the Effects on the Thermoelectric Properties of Nanotube-Containing Nanocomposites

Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles

Effects of Preparation Methods on the Thermoelectric Performance of SWCNT/Bi2Te3 Bulk Composites

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

(Bi,sb)2te3/sic Nanocomposites with Enhanced Thermoelectric Performance: Effect of SiC Nanoparticle Size and Compositional Modulation

Thermal conductivities of alumina-based multiwall carbon nanotube ceramic composites

Enhanced thermoelectric properties for p -type BiSbTe by incorporating multiferroic BiFeO 3 nanoparticles

Thermoelectric properties of a vertically aligned carbon nanotube array with embedded bismuth telluride

Synergistic Optimization of Electrical–Thermal–Mechanical Properties of the In-Filled CoSb 3 Material by Introducing Bi 0.5 Sb 1.5 Te 3 Nanoparticles

Influence of graphene oxide nanosheets and multi-walled carbon nanotubes on the thermoelectric and mechanical properties of Mg2(Si0.3Sn0.7)0.99Sb0.01

Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon Microfiber

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Effect of ball milling time on thermoelectric properties of bismuth telluride nanomaterials

Improved Thermoelectric Figure of Merit in N-Type CoSb3 Based Nanocomposites