Abstract:Microwave Staring Correlated Imaging (MSCI) is a newly proposed computational high-resolution imaging technique. The imaging performance of MSCI with the existence of modeling errors depends on the properties of the imaging matrix and the relative perturbation error resulted from existing errors. In conventional transient-radiation-fields-based MSCI, which is commonly accomplished by utilizing random frequency-hopping (FH) waveforms, the multiple transmitters should be controlled individually and simultaneously. System complexity and control difficulty are hence increased, and various types of modeling errors are introduced as well. The computation accuracy of radiation fields is heavily worsened by the modeling errors, and the transient effect makes it hard to take direct and high-precision measurements of the radiation fields and calibrate the modeling errors with the measuring result. To simplify the system complexity and reduce error sources, in this paper, steady-radiation-fields-sequence-based MSCI (SRFS-MSCI) method is proposed. The multiple transmitters are excited with coherent signals at the same observation moment, with the signal frequency varying in the whole frequency band during the imaging process. By elaborately designing the array configuration and the amplitude and phase sequences of the coherent transmitters, the SRFS-MSCI is thus implemented. Comparing the system architecture of the proposed SRFS-MSCI with the conventional random FH-based MSCI, it can be found that the proposed method significantly reduces the number of baseband modules and simplifies the system architecture and control logic, which contributes to reducing error sources such as baseband synchronization errors and decreasing deterioration caused by error cascade. To further optimize the design parameters in the proposed SRFS-MSCI system, the Simulated Annealing (SA) algorithm is utilized to optimize the amplitude sequences, the phase sequences, and the antenna positions individually and jointly. Numerical imaging experiments and real-world imaging experiment demonstrate the effectiveness of the proposed SRFS-MSCI method that recognizable high-resolution recovery results are obtained with simplified system structure and optimized system parameters.

Polarization-sensitive-metasurface-based Microwave Computational Ghost Imaging

Bi-channel Compressive Hyperspectral Imager Based on Polarization Conversion Metasurface

Polarization-dependent Unidirectional Reflectionless in Non-Hermitian Metasurface and Its Application in Near-Field Grayscale Imaging

Polarization Multiplexing Multichannel High-Q Terahertz Sensing System

Multi‐Domain Detection Computational Imaging via Reconfigurable Metasurfaces MIMO System

Metamaterial computational ghost imaging

Metamaterial Iris-Based Cavity Antenna for Mm-Wave Computational Polarimetric Imaging

Computational Microwave Imaging with a 1-Bit Phase Reconfigurable Transmitarray

Microwave Imaging under Oblique Illumination

Resolution Analysis of Spatial Modulation Coincidence Imaging Based on Reflective Surface

Metasurface-enabled single-shot and complete Mueller matrix imaging

Microwave Staring Correlated Imaging Method Based on Steady Radiation Fields Sequence

Polarization-insensitive composite gradient-index metasurface array for microwave power reception

Wavenumber Spectrum Reconstruction Method for Microwave Computational Imaging With Re-Programmable Metasurface

Midinfrared real-time polarization imaging with all-dielectric metasurfaces

Metasurface-Assisted Quantum Ghost Discrimination of Polarization Objects

Metasurface-based Microwave Power Detector for Polarization Angle Detection

Frequency-diverse MIMO metasurface antenna for computational imaging with aperture rotation technique

Metasurface-enabled compact, single-shot and complete Mueller matrix imaging

Microwave Staring Correlated Imaging Based On Time-Division Observation And Digital Waveform Synthesis

Reweighted-Dynamic-Grid-Based Microwave Coincidence Imaging With Grid Mismatch