Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Toward Stable p-Type Thiophene-Based Organic Electrochemical Transistors

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

Vertical Organic Electrochemical Transistors for Complementary Circuits

Enhanced Stability of N‐Type Organic Electrochemical Transistors Via Small‐Molecule Passivation

Improved Stability and Performance of an N-Type Depletion Mode Poly(benzodifurandione) Based Organic Electrochemical Transistor Via Electrolyte Selection

The Effect of Organic Semiconductor Electron Affinity on Preventing Parasitic Oxidation Reactions Limiting Performance of n‐Type Organic Electrochemical Transistors

Electrochemical Stability Investigations and Drug Toxicity Tests of Electrolyte-Gated Organic Field-Effect Transistors

Air- and Active Hydrogen-Induced Electron Trapping and Operational Instability in n-Type Polymer Field-Effect Transistors

Editorial: High-Performance Organic Thin-Film Transistors

Impact of electrode recrystallization on the stability of organic transistors

Molecular design strategies for high‐performance organic electrochemical transistors

Balancing Electroactive Backbone and Oligo(Ethylene Oxy) Side‐Chain Content Improves Stability and Performance of Soluble PEDOT Copolymers in Organic Electrochemical Transistors

Vertical organic electrochemical transistor platforms for efficient electropolymerization of thiophene based oligomers

Stable Organic Electrochemical Neurons Based on P-Type and N-Type Ladder Polymers.

Enhancing the Electrochemical Doping Efficiency in Diketopyrrolopyrrole‐Based Polymer for Organic Electrochemical Transistors

Stable N-Type Perylene Derivative Ladder Polymer with Antiambipolarity for Electrically Reconfigurable Organic Logic Gates

Air‐stable Perylene Diimide Trimer Material for n‐type Organic Electrochemical Transistors

Oxygen‐Induced Lattice Strain for High‐Performance Organic Transistors with Enhanced Stability

Electron-Ion Coupling Breaks Energy Symmetry in Organic Electrochemical Transistors

Asymmetric side-chain engineering of conjugated polymers with improved performance and stability in organic electrochemical transistors

n-Type organic semiconducting polymers: stability limitations, design considerations and applications