Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Analysis of Subsynchronous Torsional Vibration of Wind-Thermal Bundling Delivery System Via LCC-HVDC

Participation Factors Instability and Analysis of Direct-Drive Wind Farms with VSC-HVDC Systems

Subsynchronous Oscillation Characteristic Study Of Wind-Thermal Power Bundling And Ehv Ac-Dc Hybrid Transmission System

A Sub-synchronous Oscillation Suppression Method for Direct-drive Wind Farms Connected to VSC-HVDC Systems Based on Hybrid Passivity/Small-gain Theorem

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

Small-Signal Modeling and Analysis of DC-Link Dynamics in Type-IV Wind Turbine System

Evaluation of damping of subsynchronous interaction between direct-drive wind farm and LCC-HVDC based on the damping path analysis

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

An Equivalent Model for Sub-Synchronous Oscillation Analysis in Direct-Drive Wind Farms with VSC-HVDC Systems

Commutation Overlap Characteristic Modeling and Stability Analysis of LCC-HVDC in Sending AC Grid

Mechanism Analysis and Damping Method for High Frequency Resonance Between VSC-HVDC and the Wind Farm

An Improved Quantitative Analysis Method of Oscillation Mode for DFIG-Based Wind Power Base with LCC-HVDC Transmission Considering Frequency Coupling Characteristic

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Impedance Characteristic Analysis and Phase-locked Angle Feedforward-based Stability Improvement for LCC-HVDC in Sending AC Grid

A path analysis method to study the subsynchronous oscillation mechanism in direct-drive wind farm with VSC-HVDC system

Damping Characteristics of Interconnected Power Systems with Wind-Photovoltaic-Thermal-Bundled Power Transmitted by AC/DC Systems

Hybrid Impedance Reshaping based Resonance Damping for the Wind Farm Connected HVDC

Nonlinear Subsynchronous Oscillation Damping Controller for Direct-Drive Wind Farms with VSC-HVDC Systems

Modeling and Analysis of DC-Link Dynamics in DFIG System with an Indicator Function

Impedance Modeling and Stability Analysis of DFIG Wind Farm With LCC-HVDC Transmission

Dynamic modelling and dynamic characteristics of wind turbine transmission gearbox-generator system electromechanical-rigid-flexible coupling