Abstract:A 3D thermo-mechanical constitutive model for the polycrystalline shape memory alloy (SMA) has been used to predict the superelastic response of the textured thin-walled NiTi tubes under combined tension–torsion loading. This model is based on the work of Lim et al. and Wang. Considering the difference of Young’s modulus between austenite and martensite phase, some formulas have been modified. The new developed model has been implemented into ABAQUS as UMAT. In order to validate the model, thin-walled tube has been tested under biaxial loading. From the comparison between the simulated and experimental results, it is found that the model is quite good in predicting the overall loading–unloading process of the SMA. Both the experimental and simulated results demonstrate the significant differences in the superelastic responses under different biaxial loading paths. For both biaxial loading paths, at relatively low level of tensile strain, the overall behaviour of the tubes is smooth. But with the increase of the tensile strain level, the equivalent stress–strain curves fluctuate. For torsion–tension loading program, corresponding to about 4% strain, stress decrease upon tensile loading and stress increase upon tensile unloading are observed due to the change of shear stresses. For Type II loading program (tension followed by torsion, unload in reverse order), a stress decrease upon loading and a stress increase upon unloading are observed but the corresponding strains become big with the increase of the tensile strain level. In addition, according to the simulated results, the rate of martensite formation under tensile loading is higher than that under shearing loading.

Finite Element Modeling of A phenomenological Constitutive Model for Super-elastic Shape Memory Alloy and its Application for Preload Process Analysis of Bolted Joint

Numerical Investigation Of Preload Process Of Bolted Joint With Superelastic Shape Memory Alloy

A phenomenological constitutive model for one-dimensional shape memory alloys based on artificial neural network

Finite Element Analysis for the Self-Loosening Behavior of the Bolted Joint with a Superelastic Shape Memory Alloy

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

FINITE ELEMENT ANALYSIS OF A SUPERELASTIC SHAPE MEMORY ALLOY CONSIDERING THE EFFECT OF PLASTICITY

One-Dimensional Macroscopic Constitutive Model for Ratcheting of Superelastic Shape Memory Alloys

Constitutive Modeling of Functional Fatigue with Tension-Compression Asymmetry for Superelastic NiTi Shape Memory Alloy

A Three-Dimensional Constitutive Model for Shape Memory Alloy Considering Transformation-Induced Plasticity, Two-Way Shape Memory Effect, Plastic Yield and Tension-Compression Asymmetry

Micromechanical Modelling of Shape Memory Alloy Composites

Finite strain constitutive modeling for shape memory alloys considering transformation-induced plasticity and two-way shape memory effect

Simplified multidimensional constitutive model of super-elasticity shape memory alloy

A Three-Dimensional Model of Shape Memory Alloys under Coupled Transformation and Plastic Deformation

A 3D finite-strain-based constitutive model for shape memory alloys accounting for thermomechanical coupling and martensite reorientation

Experimental and Numerical Study of the Superelastic Behaviour on NiTi Thin-Walled Tube under Biaxial Loading

Three-dimensional Thermomechanical Modeling of Pseudoelasticity in Shape Memory Alloys with Different Elastic Properties Between Austenite and Martensite

Analysis of a Shape Memory Alloy Plate with a Circular Hole Subjected to Biaxial Tension

A CONSTITUTIVE MODEL FOR TRANSFORMATION, REORIENTATION AND PLASTIC DEFORMATION OF SHAPE MEMORY ALLOYS

A Temperature-Dependent Model of Shape Memory Alloys Considering Tensile-Compressive Asymmetry and the Ratcheting Effect.

A Finite Strain Constitutive Model for Martensitic Transformation in Shape Memory Alloys Based on Logarithmic Strain

A new constitutive model of superelastic shape memory alloy