Abstract:During repeated discharging and charging processes, the large volume change of Si causes the anode structure to break, resulting in poor cycle performance. The binder plays a vital role in reducing the volume expansion of Si. Herein, by grafting poly(ether-thioureas) (TUEG) on poly(acrylic acid) (PAA) through an amidation reaction, a self-healing polymer binder (PAA–TUEG) was designed and synthesized, which is beneficial for the fast Li ionic conduction and self-healing ability. Specifically, PAA–TUEG gel samples achieved 81% healing efficiency at room temperature without any external intervention. The Li-ion diffusion coefficient of the Si anode with PAA–TUEG as a binder reached 8.80 × 10–5 cm2 s–1. Half batteries consisting of Si anodes using the PAA–TUEG polymer as a binder and lithium metal anodes exhibited an initial discharge capacity as high as 3676.1 mAh g–1 with a Coulombic efficiency of 87.2%. A stable reversible capacity of 2744.3 mAh g–1 with a capacity retention rate of 82% after 300 cycles was also realized. It indicates that the electrochemical performance of Si anodes with this polymer binder is significantly improved compared with that using conventional binders. Furthermore, the full cell composed of LiFePO4 cathodes and Si anodes with PAA–TUEG as a binder exhibits superior electrochemical performance. This concept of the polymeric binder, combining high Li-ion conductivity and self-healing ability, should be used to improve the cycle life of next-generation batteries using high-capacity materials that undergo huge volume changes during cycling.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00329.1H NMR spectrum of TUEG and PAA–TUEG; photographs of the aqueous solution of PAA–TUEG and PAA at room temperature; Nyquist plot of Si/PAA and Si/PVDF anodes; SEM image and EDS maps of the Si/PAA–TUEG anode; force-displacement curves of Si electrodes using different binders; SEM characterizations for the electrode swelling of the Si anode; and electrochemical performance of NCM811//Si/PAA–TUEG full cells (PDF)This article has not yet been cited by other publications.

Ionically Conductive Self-Healing Polymer Binders with Poly(ether-thioureas) Segments for High-Performance Silicon Anodes in Lithium-Ion Batteries

A Self-Healing Polymer Binder of Silicon-Based Anode with Enhanced Lithium-Ion Transport Performance

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Room-Temperature Rapid Self-Healing Polymer Binders for Si Anodes in Highly Cycling-Stable and Capacity-Maintained Lithium-Ion Batteries

Dynamic hydrogen bond cross-linking binder with self-healing chemistry enables high-performance silicon anode in lithium-ion batteries

Ionically Conductive Self‐Healing Binder for Low Cost Si Microparticles Anodes in Li‐Ion Batteries

Gradient H-Bonding Supports Highly Adaptable and Rapidly Self-Healing Composite Binders with High Ionic Conductivity for Silicon Anodes in Lithium-Ion Batteries

Integrating with a tough framework and efficient self-healing behavior based on a flexible polymer skeleton for Si anode binders in lithium-ion cells

Robust Self-Healing Ion-Conductive Interlocking Dual-Network Binder Based on Gradient Dynamic Bonding for Advanced SiO Anodes in Li-Ion Batteries

Novel constructive self-healing binder for silicon anodes with high mass loading in lithium-ion batteries

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

Multiple Network Binders via Dual Cross-Linking for Silicon Anodes of Lithium-Ion Batteries

Poly(acrylic acid) Grafted with a Boronic Ester and Dopamine as a Self-Healable and Highly Adhesive Aqueous Binder for Si Anodes

Silicon Microparticle Anodes with Self-Healing Multiple Network Binder

A Highly Stretchable and Self‐Healing Composite Binder Based on the Hydrogen‐Bond Network for Silicon Anodes in High‐Energy‐Density Lithium‐Ion Batteries

Highly Energy‐Dissipative, Fast Self‐Healing Binder for Stable Si Anode in Lithium‐Ion Batteries

A mechanically robust self-healing binder for silicon anode in lithium ion batteries

A Conductive Self-Healing Hydrogel Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries

Self-healing polymer binders for the Si and Si/carbon anodes of lithium-ion batteries

A Fast Self-Healing Binder for Highly Stable SiOx Anodes in Lithium-Ion Batteries

Highly Elastic Block Copolymer Binders for Silicon Anodes in Lithium-Ion Batteries