Abstract:The liquid–solid triboelectric nanogenerator (LS-TENG) has been demonstrated to harvest energy efficiently through the contact electrification effect between liquid and solid triboelectric materials, which can avoid the wear issue in solid–solid TENG. However, the droplet-based LS-TENG reveals the problems that it generally works with the continuous falling droplets or needs to be fully packaged, which greatly limit its practical application. Here, a droplet-based triboelectric nanogenerator (DB-TENG) with a simple open structure is designed to effectively solve these problems. The nonpackaged DB-TENG can work stably under extreme conditions with high humidity or high concentrations of salt, acid, or alkali solutions, showing the DB-TENGs can be flexibly utilized in all types of working environments with better reliability and lower maintenance costs. It is of great significance that the integrated DB-TENG network array can realize the all-weather ocean energy harvesting. Furthermore, under the simulated ocean wave, a scaled-up DB-TENG with considerable output performance can charge capacitors and drive electrical devices. Overall, the DB-TENG shows many advantages: simple open structure, all-weather working ability, timely supplement of water loss, no tight packaging, wear resistance, suitable for extreme working environments. This work provides a convenient and feasible way toward all-weather wave energy harvesting in real marine environments.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c02790.Movie S1: The simulated potential distribution of droplet sliding process using the finite-element method via the commercial software COMSOL (MP4)Movie S2: LEDs are lit simultaneously using DI water droplets with integrated array with 24 DB-TENGs (MP4)Movie S3: Thirty-five LED light bulbs are lighted by vessel with a scaled-up DB-TENG module in water wave (MP4)Figures S1–S14 provide the output electrical performance of grounding and no grounding for a droplet on the FEP film; the simulated potential distribution of the ungrounded connection at four different locations; schematic diagram of two wiring modes; the structure diagram of the whole test device and shaking process; comparison of electrical characterization between steel ball and droplet after contact with FEP films; the relationship between output performance and droplet volume; output performance of the droplet-based TENG at different angular accelerations; the droplet status at different angular accelerations; comparison of the charge density reported in recent years with this work; surface contact angles of different films; the variation of current, voltage and power with external circuit resistance; circuit diagram of the self-powered system; output performance of a single DB-TENG with three different droplets; photograph of the scaled-up DB-TENG on a test ship. Notes S1–S3 provide an explanation of the simulated potential distribution diagram of the ungrounded connection; a brief discussion of the electrical characterization of droplets contact with FEP surface; calculation of the contact area and the surface charge density (PDF)This article has not yet been cited by other publications.

Scaling up blue energy harvesting: Transitioning from single generators to multiple generators

Droplet-enabled controllable manipulation of tribo-charges from liquid-solid interface

A Dual-Mode Triboelectric Nanogenerator for Efficiently Harvesting Droplet Energy

Maximizing the energy scavenging capability of droplet triboelectric nanogenerators through surface engineering

Constructing High-Performance and Versatile Liquid-Solid Triboelectric Nanogenerator with Inflatable Columnar Units

Liquid–Liquid Triboelectric Nanogenerator for Harvesting Distributed Energy

High‐Output Single‐Electrode Droplet Triboelectric Nanogenerator Based on Asymmetrical Distribution Electrostatic Induction Enhancement

A New Single‐Electrode Generator for Water Droplet Energy Harvesting with A 3 Ma Current Output

Droplet Energy Harvesting System Based on Total-Current Nanogenerator

A Four-Electrode Droplet Triboelectric Nanogenerator Providing Multimodal Output

All-Weather Droplet-Based Triboelectric Nanogenerator for Wave Energy Harvesting

Atmospheric Pressure Difference Driven Triboelectric Nanogenerator for Efficiently Harvesting Ocean Wave Energy

New cambered-surface based drip generator: A drop of water generates 50 μA current without pre-charging

Elevating Outputs of Droplet Triboelectric Nanogenerator Through Strategic Surface Molecular Engineering

Rationally Structured Triboelectric Nanogenerator Arrays for Harvesting Water Current Energy and Self‐powered Sensing

Multi-Layered Disk Triboelectric Nanogenerator for Harvesting Hydropower

Rational TENG Arrays As a Panel for Harvesting Large-Scale Raindrop Energy

A Non‐Encapsulated Polymorphous U‐Shaped Triboelectric Nanogenerator for Multiform Hydropower Harvesting

High Power Density Tower-like Triboelectric Nanogenerator for Harvesting Arbitrary Directional Water Wave Energy.

A Single‐Droplet Electricity Generator Achieves an Ultrahigh Output Over 100 V Without Pre‐Charging

A hybrid wind and raindrop energy harvesting operating on Savonius turbine