Abstract:Machining characteristics were applied to topology optimization for machine tool structure design improvement in this study, and the goals of lightweight and high rigidity of the structure were achieved. Firstly, an ultrasonic-assisted grinding experiment was carried out on zirconia to investigate the surface roughness, surface morphology, grinding vibration, and forces. Then, the topology optimization analysis was conducted for structure design improvement, in which the magnitude of the grinding vibration was utilized as the reference for selecting the topology subsystems and the grinding force was used as the boundary conditions of the static analysis in the topology optimization. Hence, columns, bases, and saddles were redesigned for structure stiffness improvement, and the variations in the effective stress, natural frequency, weight, and stiffness of the whole machine tool were compared accordingly. The results showed that the deduced topological shape (model) can make the natural frequency and stiffness of the whole machine tool tend to be stable and convergent with a weight retention rate more than 75% as the design constraint. The subsystem structures with larger effective stress distributions were designated for stiffness improvement in the design. At the same time, the topological shape (model) was also employed in the design for weight reduction, focusing on minimizing redundant materials within the structure. In contrast to the consistency of the modal shapes before and after topological analysis, the sequential number of the modal mode of the machine tool model after topological analysis was advanced by two modes relative to those of the original situation, which means the original machine tool may be out of its inherently resonant frequency range. Also, the natural frequencies corresponding to each mode had an increasing tendency, and the maximum increase was 110.28%. Furthermore, the stiffness of the machine tool also increased significantly, with a maximum of 355.97%, leading to minor changes of the machine tool’s weight. These results confirm that the topology optimization based on machining characteristics proposed in this study for structure redesign improvement and stiffness enhancement is effective and feasible.

Two-stage Topology Optimization for a Piezo-Actuated Fast Tool Servo Based on the Velocity Field Level Set Method

Structural Topology Optimization Using a Level Set Method with Finite Difference Updating Scheme

Design and Adaptive Terminal Sliding Mode Control of a Fast Tool Servo System for Diamond Machining of Freeform Surfaces

A Methodology for Topology Optimization Based on Level Set Method and Its Application to Piezoelectric Energy Harvester Design

Structure Design Improvement and Stiffness Reinforcement of a Machine Tool through Topology Optimization Based on Machining Characteristics

Integrated Development of a Topology-Optimized Compliant Mechanism for Precise Positioning

2D Minimum Compliance Topology Optimization Based on a Region Partitioning Strategy

A Novel Fast Servo Tool Device with Double Piezoelectric Driving

A Multi-Objective Topology Optimization Methodology and Its Application to Electromagnetic Actuator Designs

A Novel Derivative Free Methodology for Multi-Material Topology Optimization Based on Projective Transformations and Boolean Operations

Reliability Topology Optimization of Collaborative Design for Complex Products under Uncertainties Based on the TLBO Algorithm

Structural design and experimental research of a micro-feed tool holder based on topology optimization

Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo

Development of an Optimized Three-Axis Fast Tool Servo for Ultraprecision Cutting

A dynamic topology optimization design method based on multiple domain variable parameters

Topology Optimization of the Active Arms for a High-Speed Parallel Robot Based on Variable Height Method.

Modeling, design and control of normal-stressed electromagnetic actuated fast tool servos

Topology optimization of compliant mechanisms and structures subjected to design-dependent pressure loadings

Structural dynamic design optimization and experimental verification of a machine tool

Two-level Continuous Topology Optimization in Structural Mechanics

Full-scale topology optimization for fiber-reinforced structures with continuous fiber paths