Abstract:Ammonia synthesis has been coupled with methane conversion under plasma conditions by using Fe-Al composite metal oxides as the catalyst. The process for ammonia production starting from natural gas is thus shortened, and meanwhile, C-2 hydrocarbons are generated as a byproduct with high selectivity. In order to overcome the high barrier for the activation of methane and nitrogen, dielectric barrier discharge (DBD) technology is used to input high-quality energy into the reaction system. A thorough examination of the performance of quite a few 3d-metal oxides, SiO2, and Al2O3 has been done to screen out the cheap, promising elements for CH4-N-2 coupled conversion. Based on these results, the Fe-Al composite metal oxide is selected as the catalyst and prepared by a hydrothermal method. Under the condition of SEI (specific energy input, kJ/L) = 12 kJ/L, CH4/N-2 = 3:1, and an optimal Al-Fe ratio of 2:1, the ammonia concentration reaches 1185.86 ppm. Upon further optimization of the specific energy input and feed gas ratio, with CH4/N-2 = 1:3 and SEI = 24 kJ/L, the highest ammonia concentration reaches 3534.32 ppm. The highest methane conversion rate was 15.71% when the SEI was 24 kJ/L and CH4/N-2 = 1:5. The highest concentration of C-2 products was 1.74% with CH4/N-2 = 1:1 and SEI = 24 kJ/L. Under this condition, the selectivity of ethane, ethylene, acetylene, propane, and propylene was 52.83, 4.37, 2.71, 18.03, and 0.59%, respectively. The structure of the catalyst was characterized by XRD, XPS, TGA, and BET.

Non-thermal Plasma Assisted Catalytic Nitrogen Fixation with Methane at Ambient Conditions

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Efficient Electrocatalytic N2 Fixation with MXene under Ambient Conditions

The Journey toward Low Temperature, Low Pressure Catalytic Nitrogen Fixation

Efficient Nitrogen Fixation to Ammonia Through Integration of Plasma Oxidation with Electrocatalytic Reduction.

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Sustainable Ammonia Synthesis from Nitrogen and Water by One‐Step Plasma Catalysis

Sustainable Nitrogen Fixation to Produce Ammonia by Electroreduction of Plasma-Generated Nitrite

Sustainable ammonia synthesis from air by the integration of plasma and electrocatalysis techniques

Efficient ammonia synthesis from the air using tandem non-thermal plasma and electrocatalysis at ambient conditions

Plasma‐Assisted Sustainable Nitrogen‐to‐Ammonia Fixation: Mixed‐phase, Synergistic Processes and Mechanisms

Surface Plasmon Enabling Nitrogen Fixation In Pure Water Through A Dissociative Mechanism Under Mild Conditions

Highly Efficient Nitrogen Reduction to Ammonia through the Cooperation of Plasma and Porous Metal‐Organic Framework Reactors with Confined Water

Boosting Electrocatalytic Nitrogen Fixation with Co–N3 Site-Decorated Porous Carbon

Au nanoparticle-embedded, nitrogen-deficient hollow mesoporous carbon nitride spheres for nitrogen photofixation

Oxygen-Doped Porous Carbon Nanosheet for Efficient N-2 Fixation to NH3 at Ambient Conditions

Recent Progress on Electrocatalyst and Photocatalyst Design for Nitrogen Reduction

Selective N2/H2O adsorption onto 2D amphiphilic amorphous photocatalysts for ambient gas-phase nitrogen fixation

Sustainable Non-Thermal Plasma-Assisted Nitrogen Fixation - Synergistic Catalysis.

A Biomass-Derived Carbon-Based Electrocatalyst For Efficient N-2 Fixation To Nh3 Under Ambient Conditions

New Opportunities for Efficient N2 Fixation by Nanosheet Photocatalysts