Gyroscopic Optomechanics

Xingyu Zhang,Matthew Tomes,Tal Carmon

DOI: https://doi.org/10.1364/fio.2010.ftuz2

2010-01-01

Abstract:We suggest the use of gyroscopic optical forces, originating from the angular momentum of circularly polarized light propagating inside a bent nano-waveguide, to facilitate mechanical deformation. Right-handed and left-handed circular polarizations induce opposite displacements.

What problem does this paper attempt to address?

Vector Optomechanical Entanglement

Ying Li,Ya-Feng Jiao,Jing-Xue Liu,Adam Miranowicz,Yun-Lan Zuo,Le-Man Kuang,Hui Jing

DOI: https://doi.org/10.1515/nanoph-2021-0485

2021-01-01

Abstract:The polarizations of optical fields, besides field intensities, provide more degrees of freedom to manipulate coherent light-matter interactions. Here, we propose how to achieve a coherent switch of optomechanical entanglement in a polarized-light-driven cavity system. We show that by tuning the polarizations of the driving field, the effective optomechanical coupling can be well controlled and, as a result, quantum entanglement between the mechanical oscillator and the optical transverse electric mode can be coherently and reversibly switched to that between the same phonon mode and the optical transverse magnetic mode. This ability to switch optomechanical entanglement with such a vectorial device can be important for building a quantum network being capable of efficient quantum information interchanges between processing nodes and flying photons.
Precession Optomechanics

Xingyu Zhang,Matthew Tomes,Tal Carmon

DOI: https://doi.org/10.1364/OE.19.009066

2011-04-26

Abstract:We propose a light-structure interaction that utilizes circularly polarized light to deform a slightly bent waveguide. The mechanism allows for flipping the direction of deformation upon changing the binary polarization state of light from -\hbar to +\hbar.

Optics,Quantum Physics
Gradient and curl optical torques

Xiaohao Xu,Manuel Nieto-Vesperinas,Yuan Zhou,Yanan Zhang,Manman Li,Francisco J Rodríguez-Fortuño,Shaohui Yan,Baoli Yao

DOI: https://doi.org/10.1038/s41467-024-50440-8

2024-07-24

Abstract:Optical forces and torques offer the route towards full degree-of-freedom manipulation of matter. Exploiting structured light has led to the discovery of gradient and curl forces, and nontrivial optomechanical manifestations, such as negative and lateral optical forces. Here, we uncover the existence of two fundamental torque components, which originate from the reactive helicity gradient and momentum curl of light, and which represent the rotational analogues to the gradient and curl forces, respectively. Based on the two components, we introduce and demonstrate the concept of lateral optical torques, which act transversely to the spin of illumination. The orbital angular momentum of vortex beams is shown to couple to the curl torque, promising a path to extreme torque enhancement or achieving negative optical torques. These results highlight the intersection between the areas of structured light, Mie-tronics and rotational optomechanics, even inspiring new paths of manipulation in acoustics and hydrodynamics.
Micro-Opto-Electro-Mechanical Gyroscope Based On The Talbot Effect Of A Single-Layer Near-Field Diffraction Grating

Kunyang Xie,Rui Zhang,Chenguang Xin,Li Jin,Zhibin Wang,Zhaoba Wang,Mengwei Li,Hongbo Zhao

DOI: https://doi.org/10.1364/AO.420541

IF: 1.9

2021-01-01

Applied Optics

Abstract:We demonstrate a novel, to the best of our knowledge, micro-opto-electro-mechanical system(MOEMS) gyroscope based on the Talbot effect of a single-layer near-field diffraction grating. The Talbot effect of an optical grating is studied both theoretically and experimentally. Astructure of grating-mirror combination, fabricated by the micro-nano processingmethod, is used for out-of-plane structure detection. The detection of aweak Coriolis force is realized by using the highly sensitive displacement characteristic of Talbot imaging of near-field diffraction with a mirror mass block and single-layer grating. The experimental results showthat, the micro-displacement detection sensitivity can reach up to 0.09%/nm, and the MOEMS gyroscope can be moved in the driven direction, with a resonant frequency of 7048 Hz and a quality factor of 700, which indicates great potential of the Talbot effect in developing novel high-performance micro-gyroscopes. (C) 2021 Optical Society of America
Gyrotropic Response In The Absence Of A Bias Field

Zhiyu Wang,Zheng Wang,Jingyu Wang,Bin Zhang,Jiangtao Huangfu,John D Joannopoulos,Marin Soljačić,Lixin Ran

DOI: https://doi.org/10.1073/pnas.1210923109

2012-01-01

Abstract:Electromagnetic materials lacking local time-reversal symmetry, such as gyrotropic materials, are of keen interest and importance both scientifically and technologically. Scientifically, topologically nontrivial phenomena, such as photonic chiral edge states, allow for reflection-free transport even in the presence of large disorder. Technologically, nonreciprocal photonic devices, such as optical isolators and circulators, play critical roles in optical communication and computing technologies because of their ability to eliminate cross-talk and feedback. Nevertheless, most known natural materials that lack local time-reversal symmetry require strong external fields and function only in a limited range of the electromagnetic spectrum. By taking advantage of metamaterials capable of translating the property of unidirectional active electronic circuits into effective dielectric response, we introduce a microwave gyrotropic metamaterial that does not require an external magnetic bias. Strong bulk Faraday-like effects, observed in both simulations and experiments, confirm nonreciprocity of the effective medium. This approach is scalable to many other wavelengths, and it also illustrates an opportunity to synthesize exotic electromagnetic materials.
Manipulation of circular polarization and mechanical waves in gyroscopic metamaterials

Ying-Jing Qian,Yi-Bo Wang,Xiao-Dong Yang,Jiao Wang,Yin-Zhou Yan

DOI: https://doi.org/10.1103/physrevapplied.22.054016

IF: 4.6

2024-11-08

Physical Review Applied

Abstract:Gyroscopic metamaterials integrate rotational units within periodic structures, enabling precise manipulation of mechanical waves and exhibiting programmable material properties. This study delves into the polarization characteristics of one-dimensional (1D) chains and two-dimensional (2D) networks ... [Phys. Rev. Applied 22, 054016] Published Thu Nov 07, 2024

physics, applied
Optomechanical Gyroscope Based on Micro-Hemispherical Shell and Optical Ring Resonators

Jamal N. A. Hassan,Wenyi Huang,Maoyuan Wang,Senyu Zhang,Guangjun Wen,Yongjun Huang

DOI: https://doi.org/10.1109/jphot.2024.3432744

IF: 2.4

2024-01-01

IEEE Photonics Journal

Abstract:Silicon photonic integrated circuits and micro-electro-mechanical systems enable the design of compact, high-performance micro-opto-electro-mechanical systems (MOEMS) gyroscopes, such as recently reported optomechanical gyroscopes. However, effective on-chip light coupling within a confined micro/nano system under vacuum posed challenges for conventional angular velocity measurements in prior optomechanical gyroscopes. Additionally, A core challenge in resonant gyroscopes is directly measuring resonant frequency displacement, necessitating alternative angular velocity detection techniques. Alternatively, this work presents the design of a novel optomechanical gyroscope based on the micro-hemispherical shell resonator integrated with optical ring cavity resonators. This integrated optomechanical device combines the principles of shell resonators and optical ring cavity resonators to enhance gyroscope performance. The high-Q optical ring resonators coupled via evanescent fields from the on-chip silicon waveguide, serve as the basic building block. Overall, the gyroscope design utilizes principles of both mechanical resonators and integrated photonics to address challenges in on-chip light coupling and angular velocity detection for next-generation optomechanical inertial sensors. Numerical simulations demonstrated the optomechanical micro-hemispherical shell resonator gyroscope could attain a calculated scale factor of 77.9 mV/(°/s) and total angle random walk of 0.0662 °/h 1/2 for a micro-hemispherical shell mass of 212 ng at an input laser power of 5 mW. These performance metrics suggest the proposed integrated optomechanical gyroscope design holds promise for applications requiring chip-scale inertial navigation, attitude measurement, and stabilization.
Optical gears in a nanophotonic directional coupler

Fengchun Zhang,Yao Liang,Heran Zhang,Yong Zhang,Xu-Guang Huang,Baohua Jia,Songhao Liu

DOI: https://doi.org/10.1364/oe.25.010972

IF: 3.8

2017-05-03

Optics Express

Abstract:Gears are rotating machines, meshing with each other by teeth to transmit torque. Interestingly, the rotating directions of two meshing gears are opposite, clockwise and counterclockwise. Although this opposite handedness motion has been widely investigated in machinery science, the analogue behavior of light remains undiscovered. Here, we present a simple nanophotonic directional coupler structure which can generate two light beams with opposite handedness of polarization states-optical gears. Due to the abrupt phase shift effect and birefringence effect, the angular momentum (AM) states of photons vary with the propagation distance in two adjacent waveguides of the coupler. Thus, by the choice of coupling length, it is able to obtain two light beams with opposite handedness of polarization, confirming the appearance of optical gears. The full control in the handedness of output beams is achieved via tuning the relative phase between two orthogonal modes at the input port. Optical gears thus offer the possibility of exploring light-matter interactions in nanoscale, opening up new avenues in fields of integrated quantum computing and nanoscale bio-sensing of chiral molecules.

optics
Inverse Optical Torques on Dielectric Nanoparticles in Elliptically Polarized Light Waves

Yuzhi Shi,Tongtong Zhu,Ai Qun Liu,Lei-Ming Zhou,Manuel Nieto-Vesperinas,Amir Hassanfiroozi,Jingquan Liu,Din Ping Tsai,Zhenyu Li,Weiqiang Ding,Fan Wang,Hang Li,Qinghua Song,Xiaohao Xu,Baojun Li,Xinbin Cheng,Pin Chieh Wu,Che Ting Chan,Cheng-Wei Qiu

DOI: https://doi.org/10.1103/physrevlett.129.053902

IF: 8.6

2022-07-29

Physical Review Letters

Abstract:Elliptically polarized light waves carry the spin angular momentum (SAM), so they can exert optical torques on nanoparticles. Usually, the rotation follows the same direction as the SAM due to momentum conservation. It is counterintuitive to observe the reversal of optical torque acting on an ordinary dielectric nanoparticle illuminated by an elliptically or circularly polarized light wave. Here, we demonstrate that negative optical torques, which are opposite to the direction of SAM, can ubiquitously emerge when elliptically polarized light waves are impinged on dielectric nanoparticles obliquely. Intriguingly, the rotation can be switched between clockwise and counterclockwise directions by controlling the incident angle of light. Our study suggests a new playground to harness polarization-dependent optical force and torque for advancing optical manipulations. https://doi.org/10.1103/PhysRevLett.129.053902 © 2022 American Physical Society

physics, multidisciplinary
Spin-optomechanical coupling between light and a nanofiber torsional mode

Eliot F Fenton,Adnan Khan,Pablo Solano,Luis A Orozco,Fredrik K Fatemi,Eliot F. Fenton,Luis A. Orozco,Fredrik K. Fatemi

DOI: https://doi.org/10.1364/ol.43.001534

IF: 3.6

2018-03-26

Optics Letters

Abstract:Light that carries linear or angular momentum can interact with a mechanical object, giving rise to optomechanical effects. In particular, a photon can transfer its intrinsic angular momentum to an object when the object either absorbs the photon or changes the photon polarization, as in an action/reaction force pair. Here, we demonstrate resonant driving of torsional mechanical modes of a single-mode tapered optical nanofiber using spin angular momentum. The nanofiber torsional mode spectrum is characterized by polarimetry, showing narrow natural resonances (Q≈2,000). By sending amplitude-modulated light through the nanofiber, we resonantly drive individual torsional modes as a function of the light polarization. By varying the input polarization to the fiber, we find the largest amplification of a mechanical oscillation (>35 dB) is observed when driving the system with light containing longitudinal spin on the nanofiber waist. These results present optical nanofibers as a platform suitable for quantum spin-optomechanics experiments.

optics
Polarization-Dependent Lateral Optical Force of Subwavelength-Diameter Optical Fibers.

Xiangke Wang,Wanling Wu,Yipeng Lun,Huakang Yu,Qihua Xiong,Zhi-Yuan Li

DOI: https://doi.org/10.3390/mi10100630

IF: 3.4

2019-01-01

Micromachines

Abstract:It is highly desirable to design optical devices with diverse optomechanical functions. Here, we investigate lateral optical force exerted on subwavelength-diameter (SD) optical fibers harnessed by input light modes with different polarizations. It is interesting to find that input light modes of circular or elliptical polarizations would bring about lateral optical force in new directions, which has not been observed in previous studies. By means of finite-difference time-domain (FDTD) simulations, detailed spatial distributions of the asymmetric transverse force density are revealed, meanwhile dependence of optical force on input light polarizations, fiber diameters, and inclination angles of fiber endfaces are all carefully discussed. It is believed that polarization-sensitive reflection, refraction, and diffraction of optical fields occur at the interface, i.e., fiber oblique endfaces, resulting in asymmetrically distributed optical fields and thereafter non-zero transverse optical force. We believe our new findings could be helpful for constructing future steerable optomechanical devices with more flexibility.
Multipolar Pseudochirality Induced Optical Torque

Karim Achouri,Mintae Chung,Andrei Kiselev,Olivier J. F. Martin

2023-05-26

Abstract:It has been observed that achiral nano-particles, such as flat helices, may be subjected to an optical torque even when illuminated by normally incident linearly polarized light. However, the origin of this fascinating phenomenon has so far remained mostly unexplained. We therefore propose an exhaustive discussion that provides a clear and rigorous explanation for the existence of such a torque. Using multipolar theory, and taking into account nonlocal interactions, we find that this torque stems from multipolar pseudochiral responses that generate both spin and orbital angular momenta. We also show that the nature of these peculiar responses makes them particularly dependent on the asymmetry of the particles. By elucidating the origin of this type of torque, this work may prove instrumental for the design of high-performance nano-rotors.

Optics
Configurable Lateral Optical Forces from Twisted Mixed-Dimensional MoO3 Homostructures

Qizhi Yan,Runkun Chen,Peining Li,Xinliang Zhang

DOI: https://doi.org/10.1088/2040-8986/ad5f9e

IF: 2.1

2024-01-01

Journal of Optics

Abstract:In recent years, the concept of hyperbolic phonon polaritons (HPPs) has revolutionized the field of nanophotonic, enabling unprecedented control over light-matter interactions at the nanoscale. Here, we theoretically propose and study the lateral optical forces in twisted mixed-dimensional MoO3 homostructures. Assisted with the low-symmetry hyperbolic phonon polaritons, we realized a lateral optical force exerted on the Au nanoparticle near the surface of mixed-dimensional MoO3 homostructures with a linear polarized incident light. By controlling the polarization state, incident angle of light and the twisted angle of MoO3, the amplitude and direction of the lateral optical forces can be tailored in the mid-infrared range. Our findings provide a new platform for engineering lateral optical forces to manipulate diverse objects in a flexible and efficient manner.
Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection

Jamal N. A. Hassan,Wenyi Huang,Xing Yan,Senyu Zhang,Dingwei Chen,Guangjun Wen,Yongjun Huang

DOI: https://doi.org/10.3390/photonics11020186

IF: 2.536

2024-02-18

Photonics

Abstract:Micro-gyroscopes based on the Coriolis principle are widely employed in inertial navigation, motion control, and vibration analysis applications. Conventional micro-gyroscopes often exhibit limitations, including elevated noise levels and suboptimal performance metrics. Conversely, the advent of cavity optomechanical system technology heralds an innovative approach to micro-gyroscope development. This method enhances the device's capabilities, offering elevated sensitivity, augmented precision, and superior resolution. This paper presents our main contributions which include a novel dual-frame optomechanical gyroscope, a unique photonic crystal cavity design, and advanced numerical simulation and optimization methods. The proposed design utilizes an optical cavity formed between dual oscillating frames, whereby input rotation induces a measurable phase shift via optomechanical coupling. Actuation of the frames is achieved electrostatically via an interdigitated comb-drive design. Through theoretical modeling based on cavity optomechanics and finite element simulation, the operating principle and performance parameters are evaluated in detail. The results indicate an expected angular rate sensitivity of 22.8 mV/°/s and an angle random walk of 7.1 × 10−5 °/h1/2, representing superior precision to existing micro-electromechanical systems gyroscopes of comparable scale. Detailed analysis of the optomechanical transduction mechanism suggests this dual-frame approach could enable angular vibration detection with resolution exceeding state-of-the-art solutions.

optics
Optomechanical manipulation with hyperbolic metasurfaces

Aliaksandra Ivinskaya,Natalia Kostina,Alexey Proskurin,Mihail I. Petrov,Andrey A. Bogdanov,Sergey Sukhov,Alexey V. Krasavin,Alina Karabchevsky,Alexander S. Shalin,Pavel Ginzburg

DOI: https://doi.org/10.48550/arXiv.1810.08856

2018-10-20

Optics

Abstract:Auxiliary nanostructures introduce additional flexibility into optomechanical manipulation schemes. Metamaterials and metasurfaces capable to control electromagnetic interactions at the near-field regions are especially beneficial for achieving improved spatial localization of particles, reducing laser powers required for trapping, and for tailoring directivity of optical forces. Here, optical forces acting on small particles situated next to anisotropic substrates, are investigated. A special class of hyperbolic metasurfaces is considered in details and is shown to be beneficial for achieving strong optical pulling forces in a broad spectral range. Spectral decomposition of the Green functions enables identifying contributions of different interaction channels and underlines the importance of the hyperbolic dispersion regime, which plays the key role in optomechanical interactions. Homogenised model of the hyperbolic metasurface is compared to its metal-dielectric multilayer realizations and is shown to predict the optomechanical behaviour under certain conditions related to composition of the top layer of the structure and its periodicity. Optomechanical metasurfaces open a venue for future fundamental investigations and a range of practical applications, where accurate control over mechanical motion of small objects is required.
Optical forces in nanorod metamaterial

Andrey A. Bogdanov,Alexander S. Shalin,Pavel Ginzburg

DOI: https://doi.org/10.48550/arXiv.1506.01754

2015-06-05

Abstract:Optomechanical manipulation of micro and nano-scale objects with laser beams finds use in a large span of multidisciplinary applications. Auxiliary nanostructuring could substantially improve performances of classical optical tweezers by means of spatial localization of objects and intensity required for trapping. Here we investigate a three-dimensional nanorod metamaterial platform, serving as an auxiliary tool for the optical manipulation, able to support and control near-field interactions and generate both steep and flat optical potential profiles. It was shown that the 'topological transition' from the elliptic to hyperbolic dispersion regime of the metamaterial, usually having a significant impact on various light-matter interaction processes, does not strongly affect the distribution of optical forces in the metamaterial. This effect is explained by the predominant near-fields contributions of the nanostructure to optomechanical interactions. Semi-analytical model, approximating the finite size nanoparticle by a point dipole and neglecting the mutual re-scattering between the particle and nanorod array, was found to be in a good agreement with full-wave numerical simulation. In-plane (perpendicular to the rods) trapping regime, saddle equilibrium points and optical puling forces (directed to the excitation light source along the rods), acting on a particle situated inside or at the nearby the metamaterial, were found. The auxiliary metamaterials, employed for optical manipulation, provide additional degrees of freedom in flexible nano-mechanical control and could be employed in various cross-disciplinary applications.

Optics
A mechanical analogue of electromagnetic induction for waves in a chiral elastic structure

Finn J.P. Allison,Ozgur Selsil,Stewart G. Haslinger,Alexander B. Movchan

2024-06-10

Abstract:Classical Faraday's law on electromagnetic induction states that a change of magnetic field through a coil wire induces a current in the wire. A mechanical analogue of the Lorentz force, induced by a magnetic field on an electric charge, is the gyroscopic force. Here, we demonstrate a mechanical analogy with a chiral elastic waveguide subjected to gyroscopic forcing. We study waves in an infinite mass-spring `gyrocore helix', which consists of a helix and a central line (gyroscopic elastic core). The helicoidal geometric chirality is considered in conjunction with a physical chirality, induced by gyroscopic forces. It is shown that the interplay between these two chiral inputs leads to the breaking of symmetry of the associated dispersion diagram, resulting in a unidirectional waveform with the direction of propagation being tunable through the gyricity.

Classical Physics,Numerical Analysis
Observation of High-Order Imaginary Poynting Momentum Optomechanics in Structured Light

Yuan Zhou,Xiaohao Xu,Yanan Zhang,Manman Li,Shaohui Yan,Manuel Nieto-Vesperinas,Baojun Li,Cheng-Wei Qiu,Baoli Yao

DOI: https://doi.org/10.1073/pnas.2209721119

IF: 11.1

2022-01-01

Proceedings of the National Academy of Sciences

Abstract:The imaginary Poynting momentum (IPM) of light has been captivated as an unusual origin of optical forces. However, the IPM force is predicted only for dipolar magnetoelectric particles that are hardly used in optical manipulation experiments. Here, we report a whole family of high-order IPM forces for not only magnetoelectric but also generic Mie particles, assisted with their excited higher multipoles within. Such optomechanical manifestations derive from a nonlocal contribution of the IPM to the optical force, which can be remarkable even when the incident IPM is small. We observe the high-order optomechanics in a structured light beam, which, despite carrying no angular momentum, is able to set normal microparticles into continuous rotation. Our results provide unambiguous evidence of the ponderomotive nature of the IPM, expand the classification of optical forces, and open new possibilities for levitated optomechanics and micromanipulations.
Synthesis of optical spring potentials in optomechanical systems

Harry J. Slatyer,Giovanni Guccione,Young-Wook Cho,Ben C. Buchler,Ping Koy Lam

DOI: https://doi.org/10.1088/0953-4075/49/12/125401

2016-05-26

Abstract:We propose a method to tailor the potential experienced by a moveable end mirror in a cavity optomechanical system by specifying the spectral properties of the input field. We show that by engineering the power spectral density of the cavity input field a desired force function can be approximated, with the accuracy of the approximation limited only by the linewidth of the cavity. The very general technique presented here could have applications in many kinds of optomechanical systems, particularly those used for sensing and metrology. We demonstrate the method by applying it to improve the sensitivity of a particular gravity measurement.

Optics
Dynamically Controllable Two-Dimensional Microvehicle by Coordinated Optical Pulling-Lateral Force

Yuzhi Shi,Hong Luo,Sha Xiong,Tao He,Tongtong Zhu,Qinghua Song,Lei-Ming Zhou,Pin Chieh Wu,Zhanshan Wang,Cheng-Wei Qiu,Xinbin Cheng

DOI: https://doi.org/10.1109/jphot.2023.3323623

IF: 2.4

2023-01-01

IEEE Photonics Journal

Abstract:Harnessing exotic optical forces promises a plethora of biophysical applications and novel light-matter interactions. The exotic optical pulling force (OPF) and optical lateral force (OLF) have been studied separately, yet synthesizing both candidates simultaneously remains an unsolved challenge and could offer a more powerful manoeuvre of particles. Here, we report a coordinated scheme to harness these two forces together and present a dynamically controlled two-dimensional (2D) microvehicle. The strategy is to leverage unexplored helicity-dependent features of both forces, while the particle size and incident angle of light can also reverse optical forces. The underlying physics of the pulling-lateral force is beyond the dipole approximation, and can be the combined effect from the linear momentum transfer, spin-orbit interactions, etc. Notably, the ratio of both forces can be dynamically and arbitrarily controlled by the ellipticity of incident light solely. The configured 2D microvehicle provides a nontrivial recipe other than using metastructures which require exquisite designs and subtle fabrication processes.

Gyroscopic Optomechanics

Vector Optomechanical Entanglement

Precession Optomechanics

Gradient and curl optical torques

Micro-Opto-Electro-Mechanical Gyroscope Based On The Talbot Effect Of A Single-Layer Near-Field Diffraction Grating

Gyrotropic Response In The Absence Of A Bias Field

Manipulation of circular polarization and mechanical waves in gyroscopic metamaterials

Optomechanical Gyroscope Based on Micro-Hemispherical Shell and Optical Ring Resonators

Optical gears in a nanophotonic directional coupler

Inverse Optical Torques on Dielectric Nanoparticles in Elliptically Polarized Light Waves

Spin-optomechanical coupling between light and a nanofiber torsional mode

Polarization-Dependent Lateral Optical Force of Subwavelength-Diameter Optical Fibers.

Multipolar Pseudochirality Induced Optical Torque

Configurable Lateral Optical Forces from Twisted Mixed-Dimensional MoO3 Homostructures

Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection

Optomechanical manipulation with hyperbolic metasurfaces

Optical forces in nanorod metamaterial

A mechanical analogue of electromagnetic induction for waves in a chiral elastic structure

Observation of High-Order Imaginary Poynting Momentum Optomechanics in Structured Light

Synthesis of optical spring potentials in optomechanical systems

Dynamically Controllable Two-Dimensional Microvehicle by Coordinated Optical Pulling-Lateral Force