Abstract:Additive metal to zero-valent iron (ZVI) could enhance the reduction ability and the additive Cu 0 was incorporated to ZVI to accelerate PMS activation with atrazine (ATZ) as target compound. The efficiencies of ATZ degradation and PMS decomposition climbed up firstly and then declined as Cu 0 loading increased from 0.01 to 1.00 wt% with the maximums at 0.10 wt%. SO 4 •− , HO • , Fe(IV), O 2 •− and 1 O 2 were generated by nZVI-Cu 0 /PMS based on the results of electron paramagnetic resonance (EPR) and simultaneous degradation of nitrobenzene, ATZ, and methyl phenyl sulfoxide (PMSO). The rate constant of Fe(IV) and ATZ was estimated as 7 × 10 4 M −1 ∙s −1 via the variation of methyl phenyl sulfone (PMSO 2 )formation at different ATZ concentrations. However, Fe(IV) contributed negligibly to ATZ degradation due to the strong scavenging of Fe(IV) by PMS. SO 4 •− and HO • were the reactive species responsible for ATZ degradation and the yield ratio of SO 4 •− and HO • was about 8.70 at initial stage. Preliminary thermodynamic calculation on the possible activation ways revealed that the dominant production of SO 4 •− might originate from the atomic H reduction of PMS in the surface layer of nZVI-Cu 0 . Ten products of ATZ degradation were identified by HPLC/ESI/QTOF and the possible degradation pathways were analyzed combined with theoretical calculation on ATZ structure. The decrease of temperature or increase of solution pH led to the decline of ATZ degradation, as well as the individual addition of common ions (HCO 3 − , Cl − , SO 4 2− , NH 4 + , NO 3 − and F − ) and natural organic matters (NOM). In real water, ATZ was still efficiently degraded with the decontamination efficiency decreasing in the sequence of tap water > surface water > simulated wastewater > groundwater. For the treatment of ATZ-polluted continuous flow, nZVI-Cu 0 in double-layer layout had a higher capacity than the single-layer mode. Meanwhile, the leaching TFe and TCu were limited. The results indicate nZVI-Cu 0 /PMS is applicable and the multiple-layer layout of nZVI-Cu 0 is suggested for ATZ-polluted ground water and soil remediation.

Fast Degradation of Atrazine by Nzvi-Cu0/pms: Re-evaluation and Quantification of Reactive Species, Generation Pathways, and Application Feasibility.

Fast degradation of atrazine by nZVI-Cu 0 /PMS: Re-evaluation and quantification of reactive species, generation pathways, and application feasibility

Insights into Atrazine Degradation by Persulfate Activation Using Composite of Nanoscale Zero-Valent Iron and Graphene: Performances and Mechanisms

Enhancement of the Degradation of Atrazine Through CoFe2O4 Activated Peroxymonosulfate (PMS) Process: Kinetic, Degradation Intermediates, and Toxicity Evaluation

Efficient Peroxymonosulfate Activation by CuO-Fe2O3/MXene Composite for Atrazine Degradation: Performance, Coexisting Matter Influence and Mechanism

Removal of herbicide atrazine by a novel biochar based iron composite coupling with peroxymonosulfate process from soil: Synergistic effect and mechanism

Efficient Degradation of Atrazine by Magnetic Porous Copper Ferrite Catalyzed Peroxymonosulfate Oxidation Via the Formation of Hydroxyl and Sulfate Radicals.

Activation of Peroxymonosulfate Using Drinking Water Treatment Residuals for the Degradation of Atrazine.

Activation of Peroxymonosulfate by WTRs-based Iron-Carbon Composites for Atrazine Removal: Performance Evaluation, Mechanism Insight and Byproduct Analysis

Enhanced atrazine degradation in the Fe(III)/peroxymonosulfate system via accelerating Fe(II) regeneration by benzoquinone

Catalytic Oxidation of Contaminants by Fe0 Activated Peroxymonosulfate Process: Fe(IV) Involvement, Degradation Intermediates and Toxicity Evaluation

Degradation of Atrazine in Water by Bi2MoO6 and Visible Light Activated Fe3+/peroxymonosulfate Coupling System.

Improving the Degradation of Atrazine in the Three-Dimensional (3D) Electrochemical Process Using CuFe2O4 As Both Particle Electrode and Catalyst for Persulfate Activation

Constant oxidation of atrazine in Fe(III)/PDS system by enhancing Fe(III)/Fe(II) cycle with quinones: Reaction mechanism, degradation pathway and DFT calculation.

A Stable Biochar Supported S-nZVI to Activate Persulfate for Effective Dichlorination of Atrazine

New Insights into Atrazine Degradation by Cobalt Catalyzed Peroxymonosulfate Oxidation: Kinetics, Reaction Products and Transformation Mechanisms

Activation of peroxymonosulfate by CuCo<sub>2</sub>O<sub>4</sub> nano-particles towards long-lasting removal of atrazine

Efficient Degradation of Atrazine by Co-NZ Catalyst Prepared by Electroless Plating in the Presence of Peroxymonosulfate: Characterization, Performance and Mechanistic Consideration

Degradation of Atrazine in Heterogeneous Co3O4 Activated Peroxymonosulfate Oxidation Process: Kinetics, Mechanisms, and Reaction Pathways

Ultra-Fast Atrazine Degradation Through Synergistic Enhancement: Exploring the Synergistic Mechanism of Cofe2o4/Mxene and Thermal on Peroxymonosulfate Activation

Efficient Peroxymonosulfate Activation by Nanoscale Zerovalent Iron for Removal of Sulfadiazine and Sulfadiazine Resistance Bacteria: Sulfidated Modification or Not.