Abstract:The linearity of active mixers is usually determined by the input transistors, and many works have been proposed to improve it by modified input stages at the cost of a more complex structure or more power consumption. A new linearization method of active mixers is proposed in this paper; the input 1 dB compression point (IP1dB) and output 1 dB compression point (OP1dB) are greatly improved by exploiting the "reverse uplift" phenomenon. Compared with other linearization methods, the proposed one is simpler, more efficient, and sacrifices less conversion gain. Using this method, an ultra-high-linearity double-balanced down-conversion mixer with wide IF bandwidth is designed and fabricated in a 130 nm SiGe BiCMOS process. The proposed mixer includes a Gilbert-cell, a pair of phase-adjusting inductors, and a Marchand-balun-based output network. Under a 1.6 V supply voltage, the measurement results show that the mixer exhibits an excellent IP1dB of +7.2~+10.1 dBm, an average OP1dB of +5.4 dBm, which is the state-of-the-art linearity performance in mixers under a silicon-based process, whether active or passive. Moreover, a wide IF bandwidth of 8 GHz from 3 GHz to 11 GHz was achieved. The circuit consumes 19.8 mW and occupies 0.48 mm2, including all pads. The use of the "reverse uplift" allows us to implement high-linearity circuits more efficiently, which is helpful for the design of 5G high-speed communication transceivers.

A High Performance 0.18 &#x03bc;m CMOS Downconversion Active Mixer

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A High Performance 2-Ghz Direct-Conversion Front End with Single-Ended RF Input in 0.13 Um CMOS

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A Gm-boosted and current peaking wideband merged LNA and mixer

A 0.1-1.9Ghz 65nm CMOS Variable-Gain Mixer-First Receiver with DSA and Noise-Shaping TIA.

A 900mhz High Linearity Low Power Down-Conversion Mixer

A 24‐ghz Active Up/down Bidirectional Mixer in 130‐nm RF CMOS

A 0.18um 3.3mw Double-Balanced CMOS Active Mixer

A group-selected and gain controllable CMOS active mixer for UWB applications

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

A 1.9 GHz High Linearity CMOS Up-mixer

A Low Noise High Linearity CMOS Upconversion Mixer

A High Performance Double-Balanced Gilbert Mixer with Active Loads for 2.4-GHz ISM Band Application

A New Low Voltage RF CMOS Mixer Design

A K-Band High-Gain and Low-Noise Folded CMOS Mixer Using Current-Reuse and Cross-Coupled Techniques

A 3.3-V, 1.9-Ghz, High Linear CMOS Up-Mixer with Multi-tanh Linearization Technique

A 24-to-30 GHz Ultra-High-Linearity Down-Conversion Mixer for 5G Applications Using a New Linearization Method

A 30-60 GHz Broadband Low LO-Drive Down-Conversion Mixer with Active IF Balun in 65 nm CMOS Technology

A K-Band Active Up/Down Bidirectional Mixer in 130-Nm CMOS

A High Performance 0.18 &amp;#x03bc;m CMOS Downconversion Active Mixer