Abstract:Single cell trapping increasingly serves as a key manipulation technique in single cell analysis for many cutting-edge cell studies. Due to their inherent advantages, microfluidic devices have been widely used to enable single cell immobilization. To further improve the single cell trapping efficiency, this paper reports on a passive hydrodynamic microfluidic device based on the "least flow resistance path" principle with geometry optimized in line with corresponding cell types. Different from serpentine structure, the core trapping structure of the micro-device consists of a series of concatenated T and inverse T junction pairs which function as bypassing channels and trapping constrictions. This new device enhances the single cell trapping efficiency from three aspects: (1) there is no need to deploy very long or complicated channels to adjust flow resistance, thus saving space for each trapping unit; (2) the trapping works in a "deterministic" manner, thus saving a great deal of cell samples; and (3) the compact configuration allows shorter flowing path of cells in multiple channels, thus increasing the speed and throughput of cell trapping. The mathematical model of the design was proposed and optimization of associated key geometric parameters was conducted based on computational fluid dynamics (CFD) simulation. As a proof demonstration, two types of PDMS microfluidic devices were fabricated to trap HeLa and HEK-293T cells with relatively significant differences in cell sizes. Experimental results showed 100% cell trapping and 90% single cell trapping over 4 x 100 trap sites for these two cell types, respectively. The space saving is estimated to be 2-fold and the cell trapping speed enhancement to be 3-fold compared to previously reported devices. This device can be used for trapping various types of cells and expanded to trap cells in the order of tens of thousands on 1-cm(2) scale area, as a promising tool to pattern large-scale single cells on specific substrates and facilitate on-chip cellular assay at the single cell level. (C) 2015 AIP Publishing LLC.

DROPLET-BASED MICROFLUIDIC DEVICES FOR MULTIPLE-DROPLET TRAPPING, STORING, AND CLUSTERING EMPLOYING GUIDING TRACKS AND FORWARD/BACKWARD FLOWS

Droplet-Based Microfluidic Device for Multiple-Droplet Clustering

Guiding, Distribution, and Storage of Trains of Shape-Dependent Droplets

A journey of trains of droplets in droplet-based microfluidic devices.

A Double Droplet Trap System for Studying Mass Transport Across a Droplet-Droplet Interface.

Trapping a Moving Droplet Train by Bubble Guidance in Microfluidic Networks.

g droplet train by bubble guidance in micro fl uidic networks †

An Integrated Microfluidic Device for Droplet Manipulation

Fusion and sorting of two parallel trains of droplets using a railroad-like channel network and guiding tracks.

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

Programmable Control of Nanoliter Droplet Arrays using Membrane Displacement Traps

Janus Flexible Device with Microcone Channels for Sampling and Analysis of Biological Microfluidics

A microfluidic device enabling high-efficiency single cell trapping.

A Gravity-Actuated Technique For Droplet Microfluidics

A Microfluidic Device Enabling Deterministic Single Cell Trapping and Release.

A Microfluidic Chip With Double-Slit Arrays For Enhanced Capture Of Single Cells

Omni-liquid Droplet Manipulation Platform

On-Demand Positive Pressure-Controlled Hydrodynamic Gating for Efficient Droplet Generation and Sorting in Microfluidic Devices

Janus Droplet Parallel Arrangements Using a Simple Y-channel Flow-Focusing Microfluidic Device

A 4-channel microfluidic hydrodynamic trap for droplet deformation and coalescence in extensional flows

High-Throughput, Deterministic Single Cell Trapping and Long-Term Clonal Cell Culture in Microfluidic Devices