Abstract:Design of photocatalyst materials for hydrogen production is of great interest due to a lack of cost-effective candidates. Titanium dioxide (TiO 2 ) is a well-known photocatalyst with good stability, reasonable photoactivity, and low cost. To improve the efficiency and selectivity, we apply a surface modification approaches using nanostructured Cerium dioxide (CeO 2 ) deposited onto TiO 2 by atomic layer deposition (ALD). The deposition of CeO 2 onto TiO 2 uses the precursor Tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)cerium (IV) (Ce(TMHD) 4 ) and co-reactant ozone. The atomic layer deposition (ALD) of CeO 2 on TiO 2 was carried out by experiments with an atmospheric pressure fluidized bed ALD reactor. The TiO 2 substrate was pre-treated using a combination of ozone and humidified nitrogen flow pulses to investigate the effect of the increase of surface functional groups on CeO 2 deposition. The physicochemical properties of the obtained CeO 2 /TiO 2 photocatalysts were characterized using different methods and their photocatalytic activity was evaluated during photocatalytic hydrogen evolution reaction. We have also performed density functional theory (DFT) calculations to investigate the reaction mechanism of metal precursors Ce(TMHD) 4 and tris(methylcyclopentadienyl)cerium (III) (Ce(MeCp) 3 ) on hydroxylated rutile and anatase TiO 2 surfaces. The hydroxyl saturation coverage on different TiO 2 facets was first addressed. These facets include anatase a-TiO 2 (001) and a-TiO 2 (101) and rutile r-TiO 2 (100) and r-TiO 2 (110). Hydroxyl groups OH and H are initially binding to surface Ti and O atoms, respectively. On a-TiO 2 (001) hydroxyl recombination to form water results in a final coverage of 0.81ML, due to the shortest neighboring HO-H distance on all surfaces. The Gibbs energy is then calculated to elucidate the effect of pressure and temperature on the hydroxylated termination of TiO 2 surfaces. The final hydroxyl coverage is as follows: 0.81ML on a-TiO 2 (001) surface, 1ML on a-TiO 2 (101) and r-TiO 2 (100) surfaces, and 0.75ML on r-TiO 2 (110) surface. Two precursors (Ce(TMHD) 4 and Ce(MeCp) 3 ) are adsorbed on hydroxylated TiO 2 surfaces. After precursor adsorption and relaxation, the surface hydroxyl coverage changes with water formation. After Ce(THMD) 4 adsorbed on r-TiO 2 (100) surface, the hydroxyl coverage is decreased from 1ML to 0.25ML with 12 H 2 O molecules formation. After Ce(MeCp) 3 adsorbed on a-TiO 2 (101) surface, although the hydroxyl coverage is not changed, the hydroxyl orientation is modified, breaking the symmetry. For Ce(TMHD) 4 , direct ligand dissociation is applied to study the mechanism of eliminating the ligands. For Ce(MeCp) 3 , the ligand can be eliminated by hydrogen transfer. The barrier for hydrogen transfer is calculated using climbing image nudged elastic band (CI-NEB) method. The results show that for Ce(MeCp) 3 , the reaction is endothermic on a-TiO 2 (101) surface, but it is overall exothermic on the other three surfaces. The facets play an important role in the eliminating the ligand. We present DFT results on the activity of ceria-modified rutile TiO 2 towards water dissociation and CO 2 activation showing that this heterostructured catalyst can promote both reactions. This work will be important to reveal the mechanism and feasibility of atomic layer deposition of ceria on different TiO 2 surface facets.

Theoretical Investigation on Hydrogen Production Using Metal-Oxide Catalysts: TiO2 and CeO2

Pd/CeO2 Interface with Abundant Oxygen Vacancies for Alkaline Hydrogen Evolution/Oxidation Reaction

Theoretical Investigation on the CO2 Hydrogenation to Methanol Mechanism at Electron-Rich Active Interface over Cu/Ga-Ti-Al-O Catalyst

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Unraveling Hydrogenation Kinetic Behavior of Transition Metal Oxides Via Decoupling Dihydrogen Dissociation and Substrate Activation

The water splitting cycle for hydrogen production at photo-induced oxygen vacancies using solar energy: experiments and DFT calculation on pure and metal-doped CeO2

DFT Study on Atomic Layer Deposition of Cerium Dioxide on Hydroxylated Titanium Dioxide As Efficient Photocatalyst

Insight into enhanced hydrogen evolution of single-atom Cu1/TiO2 catalysts from first principles

H2 Activation on Metal Oxides Promoted by Highly Dispersed Pd

Study of Formation Mechanism of Ni-Pt/CeO2 Catalyst for Hydrogen Generation from Hydrous Hydrazine

Regulating metal-oxygen covalency of TiO 2 by Ru doping and phase transition for boosted hydrogen evolution

Function-oriented Design of Robust Metal Cocatalyst for Photocatalytic Hydrogen Evolution on Metal/titania Composites

C 2 H 2 selective hydrogenation over metal-doped CeO 2 catalysts: Unraveling the role of metal and surface frustrated Lewis acid-base pair in tuning catalytic performance

CO Oxidation over Three-Dimensional Transition Metal-Doped CeO2 Catalysts: A Density Functional Calculation Study

System Theoretical Study on the Effect of Variable Nonmetallic Doping on Improving Catalytic Activity of 2D-Ti3C2O2 for Hydrogen Evolution Reaction

A heterostructured ternary transition metal oxide composite as an efficient electrocatalyst for the hydrogen evolution reaction

Influence of oxygen vacancies of CeO2 on reverse water gas shift reaction

Modulation of Metal/support Interactions Improves Catalytic Performance of Ni–Pt/CeO2 for Hydrogen Generation from Hydrazine Monohydrate

Hydride Generation on the Cu-Doped CeO2(111) Surface and Its Role in CO2 Hydrogenation Reactions

Combinatorial High-Throughput Methods for Designing Hydrogen Evolution Reaction Catalysts

Insight into the boosted activity of TiO 2 -CoP composites for hydrogen evolution reaction: Accelerated mass transfer, optimized interfacial water, and promoted intrinsic activity