Identification of Fractures in Carbonates Using Sonic Imaging Log: Example from the Central of East European Plain

Xiaohua Che,Wenxiao Qiao,Peng Liu,Xiaodong Ji,Jian Lü

DOI: https://doi.org/10.1121/2.0000060

2015-01-01

Abstract:The structure of carbonate is much more complex than sandstone on its heterogeneity and anisotropy. The Republic of Tatarstan of Russia lies in the central of East European Plain, where oil-gas resource is very rich, and formations are mainly carbonates. In order to detect the underground geology of the region, the multi-pole acoustic logging tool, the micro-resistivity imaging logging tool and conventional logging tools are runned. Processing results of the multi-pole acoustic logging data indicate that the monopole shear wave attenuation, the Stoneley wave attenuation and monopole variable-density waveforms are all sensitive to the boundary where wave impedance contrast is high. The boundary may be a fracture, or a bed interface between shale and limestone. In the micro-electrical scanning images, both the low-dip fracture and the bed interface show sine curves. The sine curve of the low-dip fracture is relative rough and the curve width changed with different azimuth, compared with that of the bed interface. The azimuth of the horizontal stress can be obtained by processing cross-dipole waveforms. Micro-resistivity imaging tool provides three diameter curves of the borehole in different directions that can determine the borehole expanding direction, further getting the azimuth of the horizontal stress, too.