Abstract:Mechanical and electrical properties of carbon fiber (CF) and vertically aligned carbon nanotubes (CNTs) have been thoroughly investigated in previous studies. Growth of radially aligned CNTs on silicon oxide (SiO2) coated CF has recently been accomplished resulting in multiscale composite fiber (CNT/SiO2/CF). CNT/SiO2/CF offers promise as stress and strain sensors in CF reinforced composite materials. However, to date there have been no investigations of the electromechanical properties of CNT/SiO2/CF that would facilitate their usage as sensors in composite materials, which is the focus of this research. This study investigates fundamental mechanical and electrical properties of CF, SiO2/CF (SiO2 coated CF), and CNT/SiO2/CF during localized transverse compression at low loads (μN to mN) and small displacements (nm to a few μms). Force, strain, stiffness, and electrical resistance were monitored simultaneously during compression experiments. For CF, resistance decreased sharply upon compressive loading with hysteresis in both force and resistance being observed at low strain. For SiO2/CF, high resistance and negligible electrical conduction occurred, and the force-displacement curve was linear. CNT/SiO2/CF stiffness increased as force and strain increased and became comparable to that of CF at high strain (∼30%). Hysteresis in both force-displacement and resistance-displacement curves was observed with CNT/SiO2/CF, but was more evident as maximum strain increased and did not depend on strain rate. Force was higher and resistance was lower during compression as compared to decompression. Hysteretic energy loss is associated with internal friction between entangled CNTs. Van der Waals force between deformed and entangled CNTs hindered disentanglement, which reduced the number of electrical current paths and increased resistance during decompression. The results of this study provide new understanding of the mechanical and electrical behavior of CNT/SiO2/CF that will facilitate usage as stress and strain sensors in both stand-alone and composite materials applications.

COMPRESSIVE PROPERTIES OF DENSE VERTICALLY ALIGNED MULTI-WALLED CARBON

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

TEM Observations of Buckling and Fracture Modes for Compressed Thick Multiwall Carbon Nanotubes

Probing structural integrity of single walled carbon nanotubes by dynamic and static compression

The Effect of Nanotube Waviness and Agglomeration on the Elastic Property of Carbon Nanotube-Reinforced Composites

Electromechanical Characterization of Carbon Nanotubes Grown on Carbon Fiber

Tensile Loading Of Double-Walled And Triple-Walled Carbon Nanotubes And Their Mechanical Properties

Bulk and Lattice Properties for Rigid Carbon Nanotubes Materials

Waviness and Agglomeration Affecting on Elastic–Plastic Modulus of CNT Reinforced Composites

BUCKLING PROPERTIES OF PRE-STRESSED MULTI-WALLED CARBON NANOTUBES

A Cohesive Law for Multi-Wall Carbon Nanotubes

Axial Compression of Hierarchically Structured Carbon Nanotube Fiber Embedded in Epoxy

A comparative study of Young’s modulus of single-walled carbon nanotube by CPMD, MD and first principle simulations

Flexural creep of multi-wall carbon nanotube reinforced cement based composites under high stress level

Size-Dependent Elastic Properties Of A Single-Walled Carbon Nanotube Via A Molecular Mechanics Model

Compression test of a single carbon fiber in a scanning electron microscope and its evaluation via finite element analysis

Buckling behaviors of single-walled carbon nanotubes inserted with a linear carbon-atom chain

Architectural and Mechanical Performances of Carbon Nanotube Agglomerates Characterized by Compaction Response

Compressive Strength and Microstructure of Multi-Wall Carbon Nanotubes Reinforced Cement Composites