Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

Undercooling and Solidification of Ni2B under Different Convective Flow Conditions

Dendrite growth during rapid solidification of Co-Sb alloys

Growth Velocity-Undercooling Relationship and Structure Refinement Mechanism of Undercooled Ni-Cu Alloys

Rapid solidification of undercooled nickel-aluminium melts

Dendrite Growth Kinetics and Microstructure Evolution Mechanism of Ni2tial Intermetallic Compound Within Substantially Undercooled Liquid Ni64al19ti17 Alloy

Dendritic Growth Velocities of the Intermetallic Compounds Ni2TiAl, NiTi, Ni3Sn, Ni3Sn2 and FeAl

The Growth Velocity-Undercooling Relationship of Highly Undercooled Ni and Ni-Cu Melts

Thermophysical Properties and Rapid Solidification of an Undercooled Liquid Hexabasic Ni-Based Alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Liquid State Undercoolability and Crystal Growth Kinetics of Ternary Ni-Cu-Sn Alloys

Solute Diffusion Controlled Dendritic Growth under High Undercooling Conditions

Solidification behavior of undercooled Cu70Ni30 alloy melt

Primary Dendrite Growth of Ni3Sn Intermetallic Compound During Rapid Solidification of Undercooled Ni-Sn-Ge Alloy

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

A Comparative Study of Dendritic Growth Within Undercooled Liquid Pure Fe and Fe50Cu50 Alloy

Effect of High Undercooling on Dendritic Morphology and Mechanical Properties of Rapidly Solidified Inconel X750 Alloy

Liquid Phase Separation and Rapid Dendritic Growth of Highly Undercooled Ternary Fe62.5cu27.5sn10 Alloy

Rapid Dendrite Growth in Quaternary Ni-based Alloys

Rapid Solidification Characteristics of Highly Undercooled Liquid Ni-Cu-Mo-Ge Quaternary Alloy under Electromagnetic Levitation Condition

Concentration Dependent Growth Velocities in Undercooled Al-Rich Al-Ni Alloy Systems

Rapid Dendritic Growth Within an Undercooled Ni–Cu–Fe–Sn–Ge Quinary Alloy