Abstract:A method is proposed to achieve the singlet achromatic microlens of the wavelength‐scale thickness by utilizing high refractive index materials with an aspherical profile. Accordingly, three materials with different degrees of refractive index and dispersion are selected to prepare achromatic microlenses. The results demonstrate all achieving achromatic limiting focus. Moreover, the thickness of the high‐index microlens is only 573 nm, a reduction of ≈50% compared to the low‐index microlens. The common methods used for correcting chromatic aberration are typically based on multi‐lens and multi‐material systems, resulting in lens thicknesses that are several orders of magnitude greater than the wavelength and complex combination designs. A method to achieve the singlet achromatic microlens of the wavelength‐scale thickness by utilizing high refractive index materials with an aspherical profile is proposed. A theoretical model based on the dispersion effect is developed to guide the selection of materials and the design of thicknesses for achieving chromatic aberration correction in singlet microlenses of a given diameter and numerical aperture. H‐ZLaF68N (68N) glass, sapphire, and fused silica with relatively high to low refractive index are selected to prepare the singlet achromatic microlenses to verify the validity of the model. The thicknesses of three microlenses are 573, 737 nm, and 1.27 μm, respectively, and all of them have achieved achromatic correction as designed. This indicates that the high refractive index material not only achieves achromatic aberration but also reduces the thickness by ≈50% compared with the conventional low refractive index material of silica glass. The presented wavelength‐scale singlet achromatic microlens hold significant promise for compact wearable devices, dynamic holography, and color projection displays.

Hybrid Achromatic Microlenses with High Numerical Apertures and Focusing Efficiencies Across the Visible

3D nanoprinting for fiber-integrated achromatic diffractive lens

Fiber-integrated Hybrid Achromatic Microlenses by Combined Femtosecond Laser 3D Printing

Highly Efficient Broadband Achromatic Microlens Design Based on Low-Dispersion Materials

Chromatically Multi-Focal Optics Based on Micro-Lens Array Design.

High-Performance Achromatic Flat Lens by Multiplexing Meta-Atoms on a Stepwise Phase Dispersion Compensation Layer

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

3D Printed Multilayer Structures for High Numerical Aperture Achromatic Metalenses

Construct Achromatic Polymer Microlens for High‐Transmission Full‐Color Imaging

3D printed hybrid refractive/diffractive achromat and apochromat for the visible wavelength range

Wavelength Scale Singlet Achromatic Microlenses Based on High Refractive Index Materials

A hybrid achromatic metalens

Achromatic super-oscillatory lenses with sub-wavelength focusing

Simultaneous Achromatic and Varifocal Imaging with Quartic Metasurfaces in the Visible

An ultrabroadband 3D achromatic metalens

Conformally Mapped Mikaelian Lens for Broadband Achromatic High Resolution Focusing

3D-printed multilayer structures for high–numerical aperture achromatic metalenses

High Numerical Aperture and Broadband Achromatic Flat Lens

Computational inverse design for ultra-compact single-piece metalenses free of chromatic and angular aberration

A broadband achromatic metalens array for integral imaging in the visible

Holographic Super-Resolution Metalens for Achromatic Sub-Wavelength Focusing