Abstract:Fuel cells can be made to operate under a variety of conditions by implementing adjustable ejectors in their anode gas circulation systems. Based on a quasi-two-dimensional model and considering factors such as friction and variable area effects, a theoretical model of ejectors with needles was established to predict their primary and secondary flow rates. Theoretical calculations were used to analyze the variations in internal parameters and flow losses along the ejector, explain the reasons and laws behind the effect of needle position on ejector performance, and explore the control mechanism of different needle shapes on ejector flow rates. Finally, flow control experiments were conducted on three types of adjustable needle shapes-oblique straight, quadratic, and parabolic-to validate the precision of the adjustable ejector theoretical model and the controls of different shapes on the ejector flow rates. The research indicates that the relative errors of the quasi-two-dimensional model in predicting primary and secondary flow rates are within +/- 5 % and + 20 % to-5%, respectively. Both the primary and secondary flow rates were impacted by the needle position variation, though the impact on the secondary flow was weaker. The parabolic shape was optimal for the linear control of primary flow rates, followed by the oblique straight shape. The quadratic shape was the weakest, although the quadratic-shaped needle had a wider range of flow rate control. Modeling and experimental research on the adjustable ejector contributes to understanding the influence of the needle on the ejector performance under different working conditions, broadening the application range of the ejector, and providing a basis for flow control in the fuel cell system.

Fuel ejector design and optimization for solid oxide fuel cells using response surface methodology and multi-objective genetic algorithm

Parameter identification for solid oxide fuel cells using cooperative barebone particle swarm optimization with hybrid learning

Optimization of Dual-Impeller Configurations in a Gas–Liquid Stirred Tank Based on Computational Fluid Dynamics and Multiobjective Evolutionary Algorithm

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Multi-response Optimization of Ejector for Proton Exchange Membrane Fuel Cell Anode Systems by the Response Surface Methodology and Desirability Function Approach

Shape optimization and flow irreversibility mechanism analysis of normal temperature, high temperature and wet stream ejectors

Coupling Global Parameters and Local Flow Optimization of a Pulsed Ejector for Proton Exchange Membrane Fuel Cells

Fuel Ejector Design and Simulation Model for Anodic Recirculation SOFC System

Multi-objective optimization design of the solid oxide fuel cells using response surface methodology and genetic algorithm

Geometry optimization study of ejector in anode recirculation solid oxygen fuel cell system

Modeling and Experimental Research on Adjustable Ejector in Fuel Cell Gas Circulation System

Coupling deep learning and multi-objective genetic algorithms to achieve high performance and durability of direct internal reforming solid oxide fuel cell

Structural Design and Optimization of Proton Exchange Membrane Fuel Cell Ejector

Control Oriented Modeling of Ejector in Anode Gas Recirculation Solid Oxygen Fuel Cell Systems

Advanced Design of Cathode Array Protrusion Structure of Solid Oxide Fuel Cell Based on NSGA-II Multi-Objective Optimization

Simulation Analysis of Ejector Optimization for High Mass Entrainment under the Influence of Multiple Structural Parameters

Performance prediction and geometry optimization of ejector in PEMFC system using coupled CFD-BPNN and genetic algorithm

Analysis and multi-objective optimization of integrating a syngas-fed solid oxide fuel cell improved by a two-stage expander-organic flash cycle using an ejector and a desalination cycle

Performance Improvement of Two-Phase Steam Ejector based on CFD Techniques, Response Surface Methodology and Genetic Algorithm

Multi-objective optimization of PEM fuel cell by coupled significant variables recognition, surrogate models and a multi-objective genetic algorithm

Collaborative design of multi-type parameters for design and operational stage matching in fuel cells