Abstract:Surface acoustic wave (SAW) devices have been widely explored for real-time monitoring of toxic and irritant chemical gases such as nitrogen oxide (NO2), but they often have issues such as a complicated process of the sensing layer, low sensitivity, long response time, irreversibility, and/or requirement of high temperatures to enhance sensitivity. Herein, we report a sensing material design for room-temperature NO2 detection based on a 3D porous architecture of Ag-decorated reduced graphene oxide-polypyrrole hybrid aerogels (rGO-PPy/Ag) and apply UV activation as an effective strategy to further enhance the NO2 sensing performance. The rGO-PPy/Ag-based SAW sensor with the UV activation exhibits high sensitivity (127.68 Hz/ppm), fast response/recovery time (36.7 s/58.5 s), excellent reproducibility and selectivity, and fast recoverability. Its enhancement mechanisms for highly sensitive and selective detection of NO2 are based on a 3D porous architecture, Ag-decorated rGO-PPy, p-p heterojunction in rGO-PPy/Ag, and UV photogenerated carriers generated in the sensing layer. The scientific findings of this work will provide the guidance for future exploration of next-generation acoustic-wave-based gas sensors.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13309.Synthesis process of 3D stacked porous architecture rGO-PPy/Ag, fabrication process of the SAW NO2 sensors, cross-sectional SEM image and EDS elemental mapping of rGO-PPy/Ag sensing film; high magnification TEM images of Ag NPs; size distribution of the Ag NPs, high magnification SEM images of the sensing film; AFM images of the sensing film; XRD patterns of rGO-PPy/Ag compared with PDF standard card, Raman intensity data, XPS elemental analysis, FTIR spectrum, calculation method for the limit of detection (LOD), long-term stability tests; the temperature changes of sensing film, and I–V curve of sensing film (PDF)This article has not yet been cited by other publications.

UV-activated CuO Nanospheres Modified with Rgo Nanosheets for Ppb-Level Detection of NO2 Gas at Room Temperature

A room-temperature NO<sub>2</sub> gas sensor based on CuO nanoflakes modified with rGO nanosheets

Highly responsive and selective ppb-level NO<sub>2</sub> gas sensor based on porous Pd-functionalized CuO/rGO at room temperature

One-pot low-energy synthesis of rGO-CuO hybrid for detection of NO2 at room temperature

A room-temperature chemiresistive NO2 sensor based on one-step synthesized SnO2 nanospheres functionalized with Pd nanoparticles and rGO nanosheets

Light-activated Ultrasensitive NO2 Gas Sensor Based on Heterojunctions of CuO Nanospheres/mos2 Nanosheets at Room Temperature

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Interface engineering of a highly sensitive porous CuO modified rGO layers for room temperature NO 2 gas sensor

SnO2 Nanoparticles Incorporated CuO Nanopetals on Graphene for High-Performance Room-Temperature NO2 Sensor

Cu3N-derived hydrophobic porous CuO hollow nanospheres for NO2 detection at room temperature

Photochemical Fabrication of Ag‐Modified Hierarchical Cu@Cu2O/CuO Nanocomposite Toward Room Temperature NO2 Detection

ZnO/reduced graphene oxide nanocomposite with synergic enhanced gas sensing performance for the effective detection of NO2 at room temperature

Cu-MOF-74-derived Cu2O/CuO-C nanocomposite as an effective chemiresistive sensor for detection of NO2 at room temperature

High surface area ZnO/rGO aerogel for sensitive and selective NO2 detection at room temperature

Confined Formation of Ultrathin ZnO Nanorods/Reduced Graphene Oxide Mesoporous Nanocomposites for High-Performance Room-Temperature NO 2 Sensors.

One-step green synthesis of Cu2O/CuO@rGO composites for ppt level detection of NO2 at room temperature

Synthesis of Cu2O-Modified Reduced Graphene Oxide for NO2 Sensors

2D Hybrid Nanomaterials for Selective Detection of NO2 and SO2 Using "Light On and Off" Strategy

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Construction of In2O3/ZnO yolk-shell nanofibers for room-temperature NO2 detection under UV illumination

High Performance Acoustic Wave Nitrogen Dioxide Sensor with Ultraviolet Activated 3D Porous Architecture of Ag-Decorated Reduced Graphene Oxide and Polypyrrole Aerogel