Advanced Electrospun Filters to Protect Building Environments from Pollution

Rong-Rong Cai,Li-Zhi Zhang,Chuck Wah Yu

DOI: https://doi.org/10.1177/1420326x18820458

2018-01-01

Indoor and Built Environment

Abstract:Air pollution, especially the haze problem caused by fine particulate matter (PM2.5), has posed serious threat on human health and aroused increasing concerns from the public in recent decades. Of concern in indoor environments are adverse health effects and material damage. The indoor airborne pollutants are PMs (e.g. dander, dust, spray particles) or chemical, biological and radiological (CBR) contaminants or mixtures thereof. Figure 1 shows the common airborne pollutants and their relative sizes. Air filtration technology is the simplest and most common method for particle removal and air cleaning. According to a new report by Grand View Research, Inc., the global industrial air filtration market is expected to reach USD $6.08 billion by 2025. Among the existing air filtration technologies, there are two types of commonly used filtration media, which includes the porous film filter and the fibrous filter. The porous film filter is prepared by creating very small pores on a solid substrate, which should have low porosity (<30%). Hence, this type of filter possesses a relatively high filtration efficiency but also with a massively large pressure differential. The fibrous filter is made of a pad of loosely packed fibres which are generally perpendicular to the direction of aerosol flow. The fibre diameters vary from several microns to tens of microns. The porosity of this type of filter is high (>70%), which endows the filter with a relatively high permeability for the air. However, there still remain some disadvantages of the fibrous filter, such as relatively low filtration efficiency, incapable of capturing submicron particles due to the micron-sized fibre diameter. Electrospun nanofibrous filters have many fascinating characteristics, such as small fibre diameter, large open porosity and interconnected open pore structure. In addition, the peculiarities of electrospun nanofibre including intrinsic three-dimensional (3D) topography and easy-to-functional properties, have attracted much interests in the electrospun nanofibre as a potential multi-functional filter material. A large amount of raw materials including polymers and ceramics have been fabricated to nanofibrous membranes via electrospinning, and they can be applied as air filters. This editorial paper highlights some newly emerging electrospun air filter medium and their application in indoor pollutants removal.