Abstract:The accuracy of a machining model depends on the capability of this model to describe the physical phenomena associated to the real machining system. This includes the material constitutive model and the approach used to describe the field flow of the material in cutting. In this paper, a model of high speed machining (HSM) of Ti6Al4V titanium alloy is developed. This cutting model includes the proposed constitutive model considering the influence of strain hardening, strain-rate, temperature, and state of stress (e.g., stress triaxiality and Lode parameter) in the material plasticity and damage. Finite Element Method (FEM) using Coupled EulerianLagrangian (CEL) approach is used to simulate the cutting model. A sensitivity analysis of the influence of the mesh topography on the chip geometry and cutting force is performed resulting in the determination of the optimal element size and element orientation. Simulation results obtained using the CEL approach are compared with those obtained using the Lagrangian one. Moreover, simulated cutting force and chip geometry obtained using the proposed constitutive model are compared with those obtained using the Johnson-Cook (J-C) model, and experimental data. Both chip geometry and cutting force predicted by the proposed constitutive model is closer to the experimental one than the J-C constitutive model. The CEL approach combined with the proposed constitutive model can simulate material side flow, which results in a larger width of chip compared to the width of cut, and in the formation of lateral burr on the workpiece. It also permits simulating the cyclic variation of the plastic strain and topography of the machined surface along the cutting direction, observed experimentally.

A Comparative Study on Modeling Approaches Towards Laser-Assisted Machining

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Key Technologies of Physics-Based Milling Process Simulation

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Simulation and Experimental Analysis of Tool Wear and Surface Roughness in Laser Assisted Machining of Titanium Alloy

Fully Coupled Thermomechanical Simulation of Laser-Assisted Machining Ti6Al4V Reveals the Mechanism of Morphological Evolution During Serrated Chip Formation

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

Three-dimensional Thermal Analysis for Laser Assisted Machining of Ceramics Using FEA

Numerical Study on Laser-assisted Machining of Ti6Al4V Titanium Alloy

Machining Simulation of Ti6Al4V Using Coupled Eulerian-Lagrangian Approach and a Constitutive Model Considering the State of Stress

The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes

A Study on the Laser-Assisted Machining of Carbon Fiber Reinforced Silicon Carbide

High Temperature Deformation Mechanisms and Constitutive Modeling for Al/SiCp/45 Metal Matrix Composites Undergoing Laser-Assisted Machining

Finite Element Modeling Method Of Chip Formation Based On Ale Approach

Analytical modeling of cutting forces considering material softening effect in laser-assisted milling of AerMet100 steel

Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining

A Comparative Study of Machine Learning Methods for Computational Modeling of the Selective Laser Melting Additive Manufacturing Process