Flow field analysis and particle erosion of tunnel‐slope systems under coupling between runoff and fast (slow) seepage
Shuai Zhang,Danqing Song,Ruiliang Zhang,Kai Zhang,Qi Zhao,Suraksha Sharma
DOI: https://doi.org/10.1002/dug2.12062
2023-12-21
Deep Underground Science & Engineering
Abstract:The particles on the tunnel‐slope surface can be easily scoured under the action of water flow, which is one of the main causes of soil and water loss. A nonlinear mathematical model and a mechanical equilibrium model are established to study the flow field distribution and particle motion characteristics of a tunnel‐slope system, respectively. The mathematical model of flow field mainly includes three regions, namely, a runoff region, a highly permeable soil layer, and a weakly permeable soil layer. Therefore, the mechanical equilibrium model of sliding and rolling of a single particle by water–force coupling is established at the fluid–solid interface, and the safety factor of particle motion (sliding and rolling) is derived. The presence of particles on the surface of a tunnel slope renders it susceptible to erosion by water flow, which is a major cause of soil and water loss. In this study, a nonlinear mathematical model and a mechanical equilibrium model are developed to investigate the distribution of flow fields and particle motion characteristics of tunnel slopes, respectively. The mathematical model of flow fields comprises three parts: a runoff region, a highly permeable soil layer, and a weakly permeable soil layer. The Navier‒Stokes equation controls fluid motion in the runoff region, while the Brinkman‐extended Darcy equation governs fast and slow seepage in the highly and weakly permeable soil layers, respectively. Analytical solutions are derived for the velocity profile and shear stress expression of the model flow field under the boundary condition of continuous transition of velocity and stress at the fluid‒solid interface. The shear stress distribution shows that the shear stress at the tunnel‐slope surface is the largest, followed by the shear stress of the soil interface, indicating that particles in these two locations are most vulnerable to erosion. A mechanical equilibrium model of sliding and rolling of single particles is established at the fluid‒solid interface, and the safety factor of particle motion (sliding and rolling) is derived. Sensitivity analysis shows that by increasing the runoff depth, slope angle, and soil permeability, the erosion of soil particles will be aggravated on the tunnel‐slope surface, but by increasing the particle diameter, particle‐specific gravity, and particle stacking angle, the erosion resistance ability of the tunnel‐slope surface particles will be enhanced. This study can serve as a reference for the analysis of surface soil and water loss in tunnel‐slope systems.