Abstract:The liquid metal fast reactor represents an important reactor type for the future development of nuclear energy. Accurately modeling and predicting the subchannel flow and heat transfer phenomenon in the rod bundles plays a key role in ensuring core safety. Consequently, a subchannel code suitable for the liquid metal fast reactor is analyzed based on the subchannel analysis code of the Pressurized Water Reactor (PWR). The modified code incorporates various types of liquid metals, such as lead, lead-bismuth eutectic (LBE), and sodium, along with their constitutive models, enhancing the applicability of the liquid metal reactor systems. This code has been verified and validated at several levels, including comparing the code simulation results with other similar subchannel codes results, high-dimensional Computational Fluid Dynamics (CFD) simulations, and experiment data. The sensitivity analysis of core geometric parameters and turbulent mixing coefficients is performed based on the modified version code. The influence of the core geometry, including the rod Pitch to Diameter ratio (P/D), Rod to Wall gap (RTW) and the wire wrap pitch (H) on the sensitivity of outlet temperature has been investigated. The results show that the new subchannel analysis code suitable for liquid metal cooled reactor shows reasonable agreement with the verified and validated results. The geometric parameters, such as P/D, RTW and H have noticeable effects on the outlet temperature difference of the subchannels. Additionally, the outlet temperature distribution in the subchannel is significantly affected by different turbulent mixing coefficients and the distribution of the turbulent mixing coefficient also influenced by the reactor core sizes. Overall, this study could support the rod bundles design and safety analysis in the liquid metal reactors.

Experimental and Numerical Analysis of the Liquid Metal Mixing Phenomenon in Complex Jets of Gen-IV Nuclear System

Thermal fatigue analysis of structures subjected to liquid metal jets at different temperatures in the Gen-IV nuclear energy system

Thermal Mixing Enhancement of Liquid Metal MHD Free-Surface Flow by Optimizing Vortex Generator Arrays

Turbulent heat transfer of liquid metal inside the sub-channels of reactor core

Study on Thermal Mixing of Liquid–metal Free-Surface Flow by Obstacles Installed at the Bottom of a Channel

Large Eddy Simulation on the Lead-Bismuth Eutectic Jet at Reactor Core Outlet

Numerical Investigation for the Heat Transfer Mechanisms Between Subchannels of Bar Rod Bundles Cooled by Liquid Sodium

Analysis of Heat Flux and Velocity Effects on Nucleation Superheat in Liquid Metals Based on Dynamic Effects

A subchannel analysis code for advanced liquid metal fast reactor cores and study on heat transfer characteristics of core geometry parameters

Numerical analysis of two-phase flow and heat transfer of fuel particles and liquid metal for waste transmutation blanket

Numerical study on inter-wrapper flow and heat transfer characteristics in liquid metal-cooled fast reactors

Energy Transfer and Interaction Between Liquid Metal with Water

Large Eddy Simulation on the Mixing Characteristics of Liquid Sodium at the Core Outlet of Sodium Cooled Fast Reactors (SFR)

Modification of RELAP/SCDAPSIM/MOD4.0 for Liquid Metal in Contact With Noncondensable Gas

Numerical Research on Thermal Mixing Characteristics in a 45-Degree T-junction for Two-Phase Stratified Flow During the Emergency Core Cooling Safety Injection

Study on the Coupled Neutronic and Thermal-Hydraulic Characteristics of the New Concept Molten Salt Reactor

Study on the Coolant Mixing Phenomenon in a 45° T Junction Based on the Thermal-Mechanical Coupling Method

Turbulence budgets and statistics analysis of mixed convection liquid metal flow in horizontal channel using DNS

Study on flow and heat transfer characteristics of liquid metal flow in narrow rectangular channels under high heat flux

Numerical Analysis of Liquid Metal Helical Coil Once-Through Tube Steam Generator

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept