Experimental Investigation on the Dynamic Behavior and Microscopic Characteristics of the Aerosol Produced by Ceramic Coil Atomizer of E-Cigarettes

Ran Yang,Xin-Gang Zhu,Dong-Qing Zhu,Shu-Yan Chen,Zhi-Zhong He,Zhi-Fu Zhou

DOI: https://doi.org/10.1016/j.flowmeasinst.2023.102392

IF: 2.42

2023-01-01

Flow Measurement and Instrumentation

Abstract:The ceramic coil atomizers of e-cigarettes heat and vaporize the e-liquid to produce an inhalable e-aerosol. In this study, we built an e-aerosols generation system to experimentally investigate the influences of the puff duration, heating power and puff pressure on the particle size distribution and the representative diameters within the eaerosol. The e-aerosol generation process recorded by a high-speed camera shows that the periodic boiling on the surface of the atomizer involving bubble formation, growth, coalescence and breakup dominates the subsequent atomization and vaporization of the e-liquid, producing plenty of e-aerosols. The measurements using a particle size analyzer show that the e-aerosol size distribution reaches relatively stable since 3 s after the trigger of puff, where Sauter Mean Diameter keeps stable at around 0.42 mu m, implying that the e-aerosol production enters the steady stage. Increasing the heating power from 4.5 to 6.5 W improves the atomization quality, as indicated by the homogenization and reduction of the particle size. However, further increasing heating power over 6.5 W helps little to the atomization quality. As the puff pressure increases from 0.5 to 1.5 kPa, the representative diameters of e-aerosol are insensitive to puff pressure, while further increasing puff pressure over 1.5 kPa causes a rapid increase of representative diameters, accompanied by a broader size spectrum and more large particles. Correlations have been proposed to describe the relationship between the representative diameters and heating power and puff pressure. Finally, The heating power of 6.5 W and puff pressure of 1.5 kPa are recommended as the optimal parameters for the practical use of e-cigarettes, since the throat hit could be greatly avoided and the atomization quality of e-liquid reaches the best level.