Abstract:Coupling external heat sources effectively reduces energy consumption and improves the efficiency of the solid oxide electrolysis (SOEC) system. While an in-depth analysis of the SOEC systems in different coupling scenarios is still needed. According to the internal heat demand and the temperature of external heat sources, three coupling scenarios are defined in this study, i.e., no heat source coupling (Scenario 1), coupled low-temperature heat source (Scenario 2), and coupled high-temperature heat source (Scenario 3). Firstly, the influence of critical parameters on system efficiency is analyzed from two perspectives, including specific system loss and specific energy consumption. The results present that efficiency eta 1 mainly increases with the rise of steam utilization. Efficiency eta 2 is not significantly affected by the parameters and is primarily positively correlated with the fuel electrode steam concentration. Efficiency eta 3 is negatively related to steam utilization, fuel electrode steam concentration, and fuel electrode flow rate, while positively to stack operating temperature. Meanwhile, for Scenarios 1 and 2, the exothermic state of the stack module should be avoided. Furthermore, the system performance maps and stack operating windows in the three scenarios are obtained by changing multiple operating parameters simultaneously and setting constraints. For Scenarios 1 and 2, high system efficiency, high hydrogen production, and long lifetime cannot be achieved simultaneously, so operating parameters need to be selected at a compromise. For scenario 3, high fuel electrode flow rate and low steam utilization can basically meet the above requirements. Both high stack operating temperature and high fuel electrode steam concentration can improve hydrogen production, while the former is mainly beneficial to efficiency eta 3, and the latter can improve the three efficiencies. The results obtained can be used not only to choose the optimal working conditions of various external heat sources but also to guide the online control and load regulation during system operation.

System Level Performance Analysis and Parameter Optimization of Hydrogen Production Based on Solid Oxide Electrolytic Cell

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

Dynamic Behavior of High-Temperature CO2/H2O Co-Electrolysis Coupled with Real Fluctuating Renewable Power

Optimization of Solid Oxide Electrolysis Cells Using Concentrated Solar-Thermal Energy Storage: A Hybrid Deep Learning Approach

Analysis of performance optimization of high‐temperature solid oxide electrolytic cell based on the coupling of flow, heat, and mass transfer and electrochemistry

Optimization of High-Temperature Electrolysis System for Hydrogen Production Considering High-Temperature Degradation

System level heat integration and efficiency analysis of hydrogen production process based on solid oxide electrolysis cells

Efficiency Analysis and Operating Condition Optimization of Solid Oxide Electrolysis System Coupled with Different External Heat Sources

Control-oriented dynamic modeling and thermodynamic analysis of solid oxide electrolysis system

Thermodynamic analysis of a solid oxide electrolysis cell system in thermoneutral mode integrated with industrial waste heat for hydrogen production

Design and optimization of hydrogen production by solid oxide electrolyzer with marine engine waste heat recovery and ORC cycle

Component-level modeling of solid oxide water electrolysis cell for clean hydrogen production

A Solid Oxide Electrolysis Cell (SOEC) with High Current Density and Energy Efficiency for Hydrogen Production

Investigation of off-design characteristics of solid oxide electrolyser (SOE) operating in endothermic conditions

Dynamic Behavior of an SOEC System With a Schedule-Based Start-Up and Operating Process

A techno-economic model of a solid oxide electrolysis system

Energy and Exergy Analysis of Solid Oxide Electrolyser Cell (SOEC) Working As a CO2 Mitigation Device

Efficiency of Solid Oxide Water Electrolysis System for Hydrogen Production

Optimization of Integrated Solid Refuse Fuel and Solid Oxide Electrolyzer Cell System for Hydrogen Production

Performance Analysis of a Metal-Supported Intermediate-Temperature Solid Oxide Electrolysis Cell