Interfacial and Structural Modifications in Perovskite Solar Cells

Jazib Ali,Yu Li,Peng Gao,Tianyu Hao,Jingnan Song,Quanzeng Zhang,Lei Zhu,Jing Wang,Wei Feng,Hailin Hu,Feng Liu

DOI: https://doi.org/10.1039/c9nr10788f

IF: 6.7

2020-01-01

Nanoscale

Abstract:Interface engineering is an efficient strategy for passivating defects, improving carrier dynamics, suppressing ion migration, and enhancing the performance of perovskite photovoltaic cells.

What problem does this paper attempt to address?

Interface Modification with Inorganic Metal Salt for High Efficiency Perovskite Solar Cells

Yihui Zou,Liang Han,Changhong Lin,Haihua Hu,Peng Wang,Ping Lin,Lingbo Xu,Xiaoping Wu,Can Cui

DOI: https://doi.org/10.1021/acsaem.3c02723

IF: 6.4

2024-01-01

ACS Applied Energy Materials

Abstract:Interface modification has emerged as a highly effective strategy for achieving the synergistic optimization of surface defects of SnO2, film quality of perovskite, and their interfacial energy level matching, thereby contributing to the photovoltaic performance and long-term stability of perovskite solar cells (PSCs). Herein, we introduced SbCl3 into the SnO2/MAPbI(3) interface. This approach capitalizes on the difference in electronegativity and the similarity in ionic radii between Sn and Sb, inducing an interaction between Sn and O atoms on the SnO2 surface with Sb from SbCl3. The interaction results in an excellent SnO2/MAPbI(3) interface with fewer defects and better energy level alignment. Moreover, high-quality perovskite films with fewer bulk defects were achieved due to the beneficial effects of Cl- anions that passivate uncoordinated Pb2+ defects and promote MAPbI(3) crystallization. As a result, MAPbI(3) PSCs with SbCl3 modification prepared in a full open-air environment demonstrated a PCE of 20.69% along with enhanced stability. This research highlights the substantial potential of incorporating SbCl3 into the SnO2/perovskite interface as a promising approach for enhancing both the efficiency and stability of planar PSCs.
Surface Modulation of Halide Perovskite Films for Efficient and Stable Solar Cells

Qinxuan Dai,Chao Luo,Xianjin Wang,Feng Gao,Xiaole Jiang,Qing Zhao

DOI: https://doi.org/10.1088/1674-1056/ac1fe0

2022-01-01

Abstract:As the main distribution place of deep-level defects and the entrance of water, the interface is critical to determining both the power conversion efficiency (PCE) and the stability of perovskite solar cells (PSCs). Suitable interface design can dramatically passivate interface defects and optimize energy level alignment for suppressing the nonradiative recombination and effectively extracting the photogenerated carriers towards higher PCE. Meanwhile, a proper interface design can also block the interface diffusion of ions for high operational stability. Therefore, interface modification is of great significance to make the PSCs more efficient and stable. Upon optimized material choices, the three-dimensional halide perovskite graded junction layer, low-dimensional halide perovskite interface layer and organic salt passivation layer have been constructed on perovskite films for superior PSCs, yet a systematic review of them is missing. Thus, a guide and summary of recent advances in modulating the perovskite films interface is necessary for the further development of more efficient interface modification.
Interfacial modification of various alkali metal cations in perovskite solar cells and their influence on photovoltaic performance

Yinyi Huang,Shina Li,Chaorong Wu,Shuo Wang,Chengyan Wang,Ruixin Ma

DOI: https://doi.org/10.1039/c9nj06342k

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:The electron transport layer (ETL) between the perovskite material and cathode plays an important role in planar perovskite solar cells. In this study, an alkali metal salt solution was be used to modify the surface of the SnO2 electron transport layer to optimize electron transport. The I-V characteristic measurements and UV-Vis spectroscopy were used to investigate whether introducing the interface modification can increase the electron coupling and effectively extract the energy lever of electrons. The results indicated that the interfacial modification could reduce the trap density of states and increase the mobility of the SnO2 thin films. The efficient defect passivation significantly suppressed the recombination at the SnO2/perovskite interface. This method aims at passivation using simple and low-cost inorganic material poles.
Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells

Chenxu Zhao,Hong Zhang,Anurag Krishna,Jia Xu,Jianxi Yao

DOI: https://doi.org/10.1002/adom.202301949

IF: 9

2023-11-08

Advanced Optical Materials

Abstract:Defect passivation and mitigation of ion migration via molecular engineering of the interfaces have played a critical role in enhancing the photovoltaic performance and operational stability of perovskite solar cells (PSCs). The key interface engineering strategies enabling highly stable and efficient PSCs are focused here. Here important insights are provided into the fields of material chemistry, physical chemistry, and optoelectronics. The ongoing global research and development efforts on perovskite solar cells (PSCs) have led the power conversion efficiency to a high record of 26.1%. The optimization of PSC processing methods, the development of new compositions, and the introduction of passivation strategies are key factors behind the meteoric rise in performance. In particular, defect passivation and mitigation of ion migration via molecular engineering of the interfaces have played a critical role in enhancing the photovoltaic performance and operational stability of PSCs. The key interface engineering strategies enabling highly stable and efficient PSCs are focused here. The interface chemistry and the deleterious impact associated with it are discussed. The molecular design of effective modulators to mitigate the negative effects of perovskite interfaces is elaborated along with advanced characterization techniques to probe the interfaces. The progress of interface modification by multiple strategies is presented, and different modulator designs that are proven to be effective in mitigating the negative effects of perovskite interfaces are highlighted. Moreover, the main properties of effective interface modification strategies are summarized, and general design principles are deduced for future applications. Here, important insights are provided into the fields of material chemistry, physical chemistry, and optoelectronics.

materials science, multidisciplinary,optics
Recent advances on interface engineering of perovskite solar cells

Wenjing Yu,Xiaoran Sun,Mu Xiao,Tian Hou,Xu Liu,Bolin Zheng,Hua Yu,Meng Zhang,Yuelong Huang,Xiaojing Hao

DOI: https://doi.org/10.1007/s12274-021-3488-7

IF: 9.9

2021-06-25

Nano Research

Abstract:<p class="a-plus-plus">Lead halide perovskite solar cells (PSCs) have been rapidly developed in the past decade. Owing to its excellent power conversion efficiency with robust and low-cost fabrication, perovskite quickly becomes one of the most promising candidates for the next-generation photovoltaic technology. With the development of PSCs, the interface engineering has witnessed its increasingly critical role in maximizing the device performance as well as the long-term stability, because the interfaces in PSCs are closely correlated with the defect management, carrier dynamics and surface passivation. This review focuses on interfacial modification between the perovskite active layer and the charge transport layer, as well as the recent advances on high-efficiency and stable PSCs driven by interface engineering strategies. The contributing roles of interface engineering in terms of defect passivation, inhibiting ion migration, optimization of energy band alignment and morphological control are discussed. Finally, based on the latest progress and advances, strategies and opportunities for the future research on interface engineering for PSCs are proposed to promote the development of perovskite photovoltaic technology.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Interfaces in perovskite solar cells

Jiangjian Shi,Xin Xu,Dongmei Li,Qingbo Meng

DOI: https://doi.org/10.1002/smll.201403534

IF: 13.3

2015-06-03

Small

Abstract:The interfacial atomic and electronic structures, charge transfer processes, and interface engineering in perovskite solar cells are discussed in this review. An effective heterojunction is found to exist at the window/perovskite absorber interface, contributing to the relatively fast extraction of free electrons. Moreover, the high photovoltage in this cell can be attributed to slow interfacial charge recombination due to the outstanding material and interfacial electronic properties. However, some fundamental questions including the interfacial atomic and electronic structures and the interface stability need to be further clarified. Designing and engineering the interfaces are also important for the next-stage development of this cell.
Interface engineering for high-efficiency perovskite solar cells

Han Pan,Hui Shao,Xiao Li Zhang,Yan Shen,Mingkui Wang

DOI: https://doi.org/10.1063/5.0038073

IF: 2.877

2021-04-07

Journal of Applied Physics

Abstract:The power conversion efficiency of thin film solar cells using organic–inorganic hybrid lead halide perovskite as an absorber has achieved over 25%. An augment of the output voltage can further increase the efficiency approaching the Shockley–Queisser efficiency limitation, which is highly correlated with charge carrier management at interfaces in perovskite devices. This perspective presents some considerations to improve carrier transfer and reduce recombination loss for highly efficient perovskite solar cells, including primary requests on charge carrier transfer dynamics, reasonable design methodologies of interfacial materials, and tuning interface interaction between perovskite and charge transport layers.

physics, applied
Interfacial Modification via Aniline Molecules with Multiple Active Sites for Performance Enhancement of n-i-p Perovskite Solar Cells

Zhiquan An,Siying Chen,Tao Lu,Pengjun Zhao,Xiaodong Yang,Yang Li,Juan Hou,pengjun Zhao,Li Yang

DOI: https://doi.org/10.1039/d3tc02144k

IF: 6.4

2023-08-24

Journal of Materials Chemistry C

Abstract:Passivation of buried interface benefits the poor crystallization of perovskite films caused by defects, improves the interface contact with the electron transport layer and inhibits severe non-radiative recombination. The 4'-methoxy-2'-nitroacetanilide (ANE) molecule has variety of active sites, including C=O, C-O-C and NOO, which is promising to serve as an interface modifier in perovskite solar cells. Our research confirm ANE could reduce defects through forming chemical interactions with both SnO2 and the perovskite layer. The quality of perovskite and SnO2 is enhanced with suppressed non-radiative recombination. Finally, the power conversion efficiency (PCE) of champion device is improved to 22.63%. The target device remains 92% of its initial PCE (22.27 %) after 1200 hours' storage in the air. This study provides a key to design and screen multifunctional passivators to improve the performance of PSCs.

materials science, multidisciplinary,physics, applied
Interfacial Engineering for Improved Stability of Flexible Perovskite Solar Cells

Jie Dou,Qi Chen

DOI: https://doi.org/10.34133/energymatadv.0002

2022-12-25

Energy Material Advances

Abstract:Because of unique optoelectronic properties, such as extended carrier lifetime, large absorption coefficient, high defect tolerance factor, low exciton binding energy, and ambipolar diffusion, metal halide perovskites display enormous potential for the next generation of photovoltaics. Flexible perovskite solar cells with low weight, high flexibility, and conformability have attracted attention for portable electronic products. The interface is crucial in perovskite solar cells for both photovoltaic efficiency and operational stability. A high-quality interface could be obtained through interface engineering. Here, we summarize the degradation mechanisms and review interfacial engineering with the emphasis on their effects in flexible perovskite solar cells. On the basis of recent research progress in flexible devices, current challenges, possible directions, and perspectives are discussed. This would be helpful to promote the commercialization of flexible perovskite solar cells.
Interface Engineering and Morphology Control for High Performance Perovskite/Organic Hybrid Planar Heterojunction Solar Cells

Hin-Lap Yip,Qifan Xue,Chen Sun,Zhicheng Hu,Fei Huang,Yong Cao

DOI: https://doi.org/10.1364/pfe.2015.pt4a.4

2015-01-01

Abstract:Two strategies were employed to improve the performance of perovskite/organic planar heterojunction solar cells. First, the growth kinetic of perovskite was tuned by introducing chemically-tailored processing additives to achieve films with high crystallinity and coverage. Second, novel interfacial materials were introduced to improve both the cathode and anode contacts.
Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Qingshun Dong,Chao Zhu,Min Chen,Chen Jiang,Jingya Guo,Yulin Feng,Zhenghong Dai,Srinivas K. Yadavalli,Mingyu Hu,Xun Cao,Yuqian Li,Yizhong Huang,Zheng Liu,Yantao Shi,Liduo Wang,Nitin P. Padture,Yuanyuan Zhou

DOI: https://doi.org/10.1038/s41467-021-21292-3

IF: 16.6

2021-02-12

Nature Communications

Abstract:Abstract The perovskite solar cell has emerged rapidly in the field of photovoltaics as it combines the merits of low cost, high efficiency, and excellent mechanical flexibility for versatile applications. However, there are significant concerns regarding its operational stability and mechanical robustness. Most of the previously reported approaches to address these concerns entail separate engineering of perovskite and charge-transporting layers. Herein we present a holistic design of perovskite and charge-transporting layers by synthesizing an interpenetrating perovskite/electron-transporting-layer interface. This interface is reaction-formed between a tin dioxide layer containing excess organic halide and a perovskite layer containing excess lead halide. Perovskite solar cells with such interfaces deliver efficiencies up to 22.2% and 20.1% for rigid and flexible versions, respectively. Long-term (1000 h) operational stability is demonstrated and the flexible devices show high endurance against mechanical-bending (2500 cycles) fatigue. Mechanistic insights into the relationship between the interpenetrating interface structure and performance enhancement are provided based on comprehensive, advanced, microscopic characterizations. This study highlights interface integrity as an important factor for designing efficient, operationally-stable, and mechanically-robust solar cells.

multidisciplinary sciences
Crown Ether-Modified 1D/3D Heterojunction for Efficient and Stable Carbon-Based CsPbI 3 Perovskite Solar Cells

Wenran Wang,Xin Peng,Jianxin Zhang,Rong Huang,Huishi Guo,Zhenxiao Pan,Huashang Rao,Xinhua Zhong,Guizhi Zhang

DOI: https://doi.org/10.1021/acsami.4c14724

IF: 9.5

2024-12-03

ACS Applied Materials & Interfaces

Abstract:Interface engineering strategies passivate defects on the polycrystalline perovskite film surface and improve the stability of corresponding perovskite solar cells (PSCs). However, a single interface engineering step can result in restricted benefits on various occasions. Therefore, an appropriate additional modification step can be necessary to synergistically improve the device performance. In this study, a two-step interface engineering strategy is developed. Initially, the CsPbI(3)...

materials science, multidisciplinary,nanoscience & nanotechnology
The Progress of Interface Design in Perovskite‐Based Solar Cells

Rundong Fan,Yuan Huang,Ligang Wang,Liang Li,Guanhaojie Zheng,Huanping Zhou

DOI: https://doi.org/10.1002/aenm.201600460

IF: 27.8

2016-01-01

Advanced Energy Materials

Abstract:Organic–inorganic halide perovskite has received extensive attention as a light harvester for next‐generation low‐cost and high‐performance photovoltaics. Its superior optoelectronic properties are attractive among most thin film absorber materials, such as an extremely high absorption coefficient, optimal band gap, ambipolar carrier transport property, and high defects tolerance. However, it requires suitable electrodes and carrier transport materials to fulfill efficient photovoltaic process within an entire device. Thus, the interfaces along the device play a crucial role in determining device photovoltaic performance. Here, the progress of understanding interfaces in perovskite photovoltaics is reviewed from the perspective of processing chemistry and photophysics of carriers, which are the key parameters for the corresponding device photovoltaic behavior. This study is mainly focused on the relevant working mechanism, interface design fundamentals, and the resulting carrier dynamic control over the entire architecture. The study of the interfaces with appropriate materials design provides a fundamental understanding of the photocarrier behavior, including separation, transportation, and collection. The accumulative efforts will contribute to the construction of high‐efficiency perovskite‐based single junction and multijunction photovoltaic devices. It also affects other properties of perovskite solar cells, including J–V hysteresis phenomenon, and long‐term stability. Suggestions with respect to required improvements and future research directions are provided based on the current field of available literature.
Resonant Molecular Modification for Energy Level Alignment in Perovskite Solar Cells

Yunjuan Niu,Yaole Peng,Xianxi Zhang,Yingke Ren,Rahim Ghadari,Jun Zhu,Gavin Tulloch,Hong Zhang,Polycarpos Falaras,Linhua Hu

DOI: https://doi.org/10.1021/acsenergylett.2c01537

IF: 22

2022-08-29

ACS Energy Letters

Abstract:The energy level alignment at interfaces of perovskite solar cells (PSCs) is an essential factor determining their efficiency and stability. Therefore, an interface capable of appropriate energy band bending, minimal defects, and good contacts is the key issue for obtaining high-performing and stable PSCs. Herein, we present an innovative interface engineering approach employing an ortho-squaraine derivative with zwitterionic resonance structure, which can change the charge state of the perovskite surface to tune the energy level structure and can form π–π stacking with the hole-transporting material to shorten the carrier transmission distance and facilitate charge transfer. By the synergistic action of the double functionalization, the PSCs containing 3,4-Bis(4-bromophenyl)cyclobut-3-ene-1,2-dione achieved power conversion efficiency (PCE) of 23.82%, and the stability of the unencapsulated devices are greatly improved. For perovskite interfacial engineering, use of the resonant squaraine zwitterion is a promising chemical design element to enhance PSCs’ efficiency and stability.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Interface Engineering in Organic and Organic/Inorganic Hybrid Solar Cells

Jing-qi Xu,Wei-fei Fu,Shi-da Yang,Tang Liu,Chang-zhi Li,Hong-zheng Chen

DOI: https://doi.org/10.11777/j.issn1000-3304.2018.17251

2018-01-01

Abstract:Third generation solar cells including organic solar cells, perovskite solar cells have attracted much attention due to their advantages of low cost, solution processability and flexibility. The rapid progress in this field is attributed to the development of absorbing layers, interfacial materials or interfacial modification, device architectures and so on. Especially, the interfaces in the devices significantly affect the exciton dissociation, charge carrier transport and collection, and subsequently affect the device performance. This review focuses on the interface engineering in organic solar cells, polymer/nanocrystal hybrid solar cells and perovskite solar cells in our group. We summarize the strategies of designing effective interfacial materials including hole-transporting materials, electron-transporting materials and their modification to achieve ohmic contact at the interface of active layer and electrodes. A series of low-temperature solution processed low-cost inorganic materials and organic small molecules are developed. With appropriate energy levels, high mobility and low defect or ability to passivate perovskites, highly efficient organic and perovskite solar cells are achieved. Self-assembly monolayer technologies are also discussed here. It is an efficient way to modify the work function of electrodes to obtain ohmic contact between electrodes and active layer. On one hand, the self-assembly monolayer can also be used to passivate the defect of metal oxide buffer layer such as ZnO or TiO2 to reduce recombination, which may improve the morphology of perovskite film to enhance the performance. Plasmonic effect is introduced to enhance the light absorption of active layer by incorporating Au or Ag nanoparticles into the interface layers. At last, the optimized strategies for interface modification between polymer and nanocrystals to improve the exciton dissociation and charge transport are discussed in details. By attaching benzenedithiol ligands onto the surface of CdSe nanocrystals in the "face-on" geometry, the nanocrystal-nanocrystal or polymer-nanocrystal distance is minimized. Furthermore, the "electroactive" p-orbitals of the benzenedithiol can further enhance the electronic coupling, which facilitates charge carrier dissociation and transport. On the other hand, judicious choice of ligands with appropriate molecular dipoles has a strong impact on chemical and electronic structures at the polymer-nanocrystal interface and subsequently on photovoltaic device performance. With these strategies, highly efficient polymer/CdSe nanocrystal hybrid solar cells have been achieved. A few viewpoints on further developing interface engineering for high-performance solar cells are also provided.
Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells (Adv. Funct. Mater. 37/2023)

Yinghui Wu,Qihua Liang,Hongwei Zhu,Xingyi Dai,Bin‐Bin Yu,Yang Hu,Miao Chen,Long‐Biao Huang,Shaik M. Zakeeruddin,Zhongjin Shen,Junfeng Wang,Michael Grätzel

DOI: https://doi.org/10.1002/adfm.202370221

IF: 19

2023-09-14

Advanced Functional Materials

Abstract:Surface Defect Modifications In article number 2302404, Hongwei Zhu, Zhongjin Shen, Junfeng Wang, Michael Grätzel, and co‐workers develop a novel surface passivator as the interfacial layer between the perovskite and hole transport layer to modify the surface defect states, yielding greatly improved photovoltaic performance and device stability. The study highlights the molecular engineering for efficient and stable perovskite solar cells.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells

Lijian Zuo,Qi Chen,Nicholas De Marco,Yao-Tsung Hsieh,Huajun Chen,Pengyu Sun,Sheng-Yung Chang,Hongxiang Zhao,Shiqi Dong,Yang Yang

DOI: https://doi.org/10.1021/acs.nanolett.6b04015

IF: 10.8

2016-12-16

Nano Letters

Abstract:The ionic nature of perovskite photovoltaic materials makes it easy to form various chemical interactions with different functional groups. Here, we demonstrate that interfacial chemical interactions are a critical factor in determining the optoelectronic properties of perovskite solar cells. By depositing different self-assembled monolayers (SAMs), we introduce different functional groups onto the SnO<sub>2</sub> surface to form various chemical interactions with the perovskite layer. It is observed that the perovskite solar cell device performance shows an opposite trend to that of the energy level alignment theory, which shows that chemical interactions are the predominant factor governing the interfacial optoelectronic properties. Further analysis verifies that proper interfacial interactions can significantly reduce trap state density and facilitate the interfacial charge transfer. Through use of the 4-pyridinecarboxylic acid SAM, the resulting perovskite solar cell exhibits striking improvements to the reach the highest efficiency of 18.8%, which constitutes an ∼10% enhancement compared to those without SAMs. Our work highlights the importance of chemical interactions at perovskite/electrode interfaces and paves the way for further optimizing performances of perovskite solar cells.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Interface Engineering in N‐i‐p Metal Halide Perovskite Solar Cells (solar RRL 12∕2018)

Zhi Yang,Jinjuan Dou,Minqiang Wang

DOI: https://doi.org/10.1002/solr.201870236

IF: 9.1726

2018-01-01

Solar RRL

Abstract:In article no. 1800177, Zhi Yang, Minqiang Wang, and Jinjuan Dou discuss interface engineering in n-i-p metal halide perovskite solar cells, achieved by introducing 2D perovskites, functional molecules, quantum dots, and an insulating layer, which allows for better energy-level alignment, passivating traps, resisting moisture, and suppressing ion migration. This contributes to improved performance, enhanced long-term stability, and eliminated photocurrent hysteresis.
Molecularly Engineered Interfaces in Metal Halide Perovskite Solar Cells

Tianqi Niu,Qifan Xue,Hin-Lap Yip

DOI: https://doi.org/10.1021/acs.jpclett.1c00954

2021-05-27

Abstract:Perovskite solar cells (PSCs) have emerged as a promising candidate for next-generation thin-film photovoltaic technology owing to their excellent optoelectronic properties and cost-effectiveness. To gain the full potential of device performance, an in-depth understanding of the surface/interface science is an urgent need. Here, we present a review of molecularly engineered studies on interface modifications of PSCs. We elaborate a systematic classification of the existing optimization techniques employed in molecularly engineered perovskite and interface materials and analyze the insights underlying the reliability issues and functional behaviors. The achievements allow us to highlight the crucial strengths of molecular design for further tailoring of the interfacial properties, mitigating the nonradiative losses, optimizing the device performance, and retarding the degradation process of PSCs. Finally, the remaining challenges and potential development directions of molecularly engineered interfaces for high-performance and stable PSCs are also proposed.
Interfacial Passivation Engineering for Highly Efficient Perovskite Solar Cells with a Fill Factor over 83

Xiaofei Ji,Kui Feng,Suxiang Ma,Junwei Wang,Qiaogan Liao,Zhaojin Wang,Bolin Li,Jiachen Huang,Huiliang Sun,Kai Wang,Xugang Guo

DOI: https://doi.org/10.1021/acsnano.2c01547

IF: 17.1

2022-07-23

ACS Nano

Abstract:Charge carrier nonradiative recombination (NRR) caused by interface defects and nonoptimal energy level alignment is the primary factor restricting the performance improvement of perovskite solar cells (PSCs). Interfacial modification is a vital strategy to restrain NRR and enable high-performance PSCs. We report here two interfacial materials, PhI-TPA and BTZI-TPA, consisting of phthalimide and a 2,1,3-benzothiadiazole-5,6-dicarboxylicimide core, respectively. The difunctionalized BTZI-TPA with...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Interfacial and Structural Modifications in Perovskite Solar Cells

Interface Modification with Inorganic Metal Salt for High Efficiency Perovskite Solar Cells

Surface Modulation of Halide Perovskite Films for Efficient and Stable Solar Cells

Interfacial modification of various alkali metal cations in perovskite solar cells and their influence on photovoltaic performance

Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells

Recent advances on interface engineering of perovskite solar cells

Interfaces in perovskite solar cells

Interface engineering for high-efficiency perovskite solar cells

Interfacial Modification via Aniline Molecules with Multiple Active Sites for Performance Enhancement of n-i-p Perovskite Solar Cells

Interfacial Engineering for Improved Stability of Flexible Perovskite Solar Cells

Interface Engineering and Morphology Control for High Performance Perovskite/Organic Hybrid Planar Heterojunction Solar Cells

Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Crown Ether-Modified 1D/3D Heterojunction for Efficient and Stable Carbon-Based CsPbI 3 Perovskite Solar Cells

The Progress of Interface Design in Perovskite‐Based Solar Cells

Resonant Molecular Modification for Energy Level Alignment in Perovskite Solar Cells

Interface Engineering in Organic and Organic/Inorganic Hybrid Solar Cells

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells (Adv. Funct. Mater. 37/2023)

Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells

Interface Engineering in N‐i‐p Metal Halide Perovskite Solar Cells (solar RRL 12∕2018)

Molecularly Engineered Interfaces in Metal Halide Perovskite Solar Cells

Interfacial Passivation Engineering for Highly Efficient Perovskite Solar Cells with a Fill Factor over 83