Abstract:The limited portability of pneumatic pumps presents a challenge for ankle-foot orthosis actuated by pneumatic actuators. The high-pressure requirements and time delay responses of pneumatic actuators necessitate a powerful and large pump, which renders the entire device heavy and inconvenient to carry. In this paper, we propose and validate a concept that enhances portability by employing a slack cable tendon mechanism. By managing slack tension properly, the time delay response problem of pneumatic actuators is eliminated through early triggering, and the system can be effectively controlled to generate the desired force for dorsiflexion assistance. The current portable integration of the system weighs approximately 1.6 kg, with distribution of 0.5 kg actuation part on the shank and 1.1 kg power system on the waist, excluding the battery. A mathematical model is developed to determine the proper triggering time and volumetric flow rate requirements for pump selection. To evaluate the performance of this actuation system and mathematical model, the artificial muscle's response time and real volumetric flow rate were preliminarily tested with different portable pumps on a healthy participant during treadmill walking at various speeds ranging from 0.5 m/s to 1.75 m/s. Two small pumps, specifically VN-C1 (5.36 L/min, 300 g) and VN-C4 (9.71L/min, 550 g), meet our design criteria, and then tested on three healthy subjects walking at normal speeds of 1 m/s and 1.5 m/s. The kinematic and electromyographic results demonstrate that the device can facilitate ankle dorsiflexion with a portable pump (300–500 g), generating sufficient force to lift up the foot segment, and reducing muscle activity responsible for ankle dorsiflexion during the swing phase by 8% and 10% at normal speeds of 1 m/s and 1.5 m/s respectively. This portable ankle robot, equipped with a compact pump weighing approximately 1.6 kg, holds significant potential for assisting individuals with lower limb weakness in walking, both within their homes and in clinical settings.

Improving the Assisting Efficiency of Ankle Robot through Energy Harvesting of Achilles Tendon

Mechanical Efficiency Investigation of an Ankle-Assisted Robot for Human Walking with a Backpack-Load

Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking

A Lightweight Ankle Exoskeleton Amplifying Input Power to Create High Power Assistance

Modulating Energy Among Foot-Ankle Complex With an Unpowered Exoskeleton Improves Human Walking Economy

Design of Ankle Exoskeleton Based on Analysis on Energy Cost of Human Walking

Design and Evaluation of a Bilateral Mobile Ankle Exoskeleton with High-Efficiency Actuation

A Time Division Multiplexing Inspired Lightweight Soft Exoskeleton for Hip and Ankle Joint Assistance

Ergonomics Design and Assistance Strategy of A-Suit

Evaluation of Lower Leg Muscle Activities During Human Walking Assisted by an Ankle Exoskeleton

An Improved Model To Estimate Muscle-Tendon Mechanics And Energetics During Walking With A Passive Ankle Exoskeleton

Design and Performance Evaluation of a Novel Wearable Parallel Mechanism for Ankle Rehabilitation

Design and Evaluation of a Mobile Ankle Exoskeleton with Switchable Actuation Configurations

A Soft Wearable Robotic Suit for Ankle and Hip Assistance: a Preliminary Study

Gastrocnemius and Power Amplifier Soleus Spring-Tendons Achieve Fast Human-like Walking in a Bipedal Robot

Design, Optimization and Energetic Evaluation of an Efficient Fully Powered Ankle-Foot Prosthesis with a Series Elastic Actuator

Design of a Passive Gait-based Ankle-foot Exoskeleton with Self-adaptive Capability

A Wearable Lower Limb Exoskeleton: Reducing the Energy Cost of Human Movement

Improving Walking Economy with an Ankle Exoskeleton Prior to Human-in-the-Loop Optimization

A portable AFO solution for pneumatic actuator with cable tendon mechanism to assist ankle dorsiflexion

Energy Regeneration from Electromagnetic Induction by Human Dynamics for Lower Extremity Robotic Prostheses