Abstract:Considering the fact that the acoustic attenuation increases with the carrier frequency, the attention shifts towards the low-frequency ultrasonic waves in the field of ultrasonic nondestructive testing and structural health monitoring of highly attenuative materials. However, low-frequency ultrasonic waves may sharply reduce the imaging resolution, although it can propagate longer distance. When an ultrasonic primary longitudinal wave tone burst propagates through an elastic solid with quadratic nonlinearity, it results in the generation of the quasi-static component (QSC). The QSC has advantages of low attenuation and better sound beam directivity, so it is expected to be a novel tool for non-destructive testing of highly attenuative materials. Therefore, aimed at detecting defects and improving the imaging quality in highly attenuative materials, a novel synthetic aperture focusing technique in the time domain combined with nonlinear ultrasonic QSC is proposed. In this study, experimental examinations were carried out to evaluate the imaging performance of the proposed method and low-frequency ultrasonic waves, in which a pulse-echo transducer is used to detect the QSC pulse generated by a primary longitudinal wave. The imaging results indicate that the proposed method has significant advantages over low-frequency ultrasonic waves in terms of visual presentation of defects. The effect of the duration of the tone burst on imaging quality is also investigated, and the results show that the imaging quality is optimal when the cycle number meets the requirement for the maximum response of QSC. This study would open new perspectives for the research on ultrasonic imaging in highly attenuative materials.

Ultrasonic defect detection in noisy signals by a nonconvex sparse regularization approach

Enhancing Ultrasonic Flaw Detection by a Nonconvex Sparse Regularization Approach

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

A Model-Based Regularized Inverse Method for Ultrasonic B-scan Image Reconstruction

Sparse Deconvolution Method for Ultrasound Images Based on Automatic Estimation of Reference Signals.

A Bayesian Approach for Sparse Flaw Detection from Noisy Signals for Ultrasonic NDT

A flaw echo detection method based on S-transformation and time-frequency spectrum spatial filtering

Adaptive Wavelet Thresholding Based Ultrasonic Signal Denoising

Sparse Blind Deconvolution with Nonconvex Optimization for Ultrasonic NDT Application

Sparse Reconstruction of Flaw Signal from Noisy Ultrasonic Data: A Bayesian Framework

Sparse Deconvolution Methods for Ultrasonic NDT

Non-linear Wavelet Shrinkage Based Method for Defect Detection in Ultrasonic Signal

Ultrasonic array imaging of porosity defects with contrast enhancement based on dominant response subtraction

Research on Self-Learning Flaw Detection in Ultrasonic C-Scan Non-Destructive Testing

Flaw Detection in Highly Scattering Materials Using a Simple Ultrasonic Sensor Employing Adaptive Template Matching.

Contemporary ultrasonic signal processing approaches for nondestructive evaluation of multilayered structures

Synthetic Aperture Focusing Imaging for Defect Detection in Highly Attenuative Materials Using Quasi-Static Components of Ultrasonic Longitudinal Waves

Automated ultrasonic testing for near-surface flaws in CFRP

Unsupervised Diagnostic and Monitoring of Defects Using Waveguide Imaging with Adaptive Sparse Representation

Weighted Non-Convex Penalty Minimization for Compressed Ultrasound Signal Reconstruction

Ultrasonic nondestructive test signal processing based on empirical mode decomposition