Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Optimization Design of Rubberized Porous Asphalt Mixture Based on Noise Reduction and Pavement Performance

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Study on Low Noise Asphalt Pavement Mixture Design

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Design method of asphalt mixture with balanced noise reduction and mechanical properties

Reconstruction of Asphalt Pavements with Crumb Rubber Modified Asphalt Mixture in Cold Region: Material Characterization, Construction, and Performance

Mechanical and Acoustic Properties Composition Design and Effects Analysis of Poroelastic Road Surface

The design and performance evaluation of low-noise rubber-fibre micro-surfacing pavement

Effect of void ratio and rubber particles on the noise reduction mechanism and comprehensive performance of porous elastic road surface

Effects of clogging and cleaning on sound absorption performance of rubberized porous asphalt mixture

Effect of Crumb Rubber Particles on Antisliding and Noise-Reduction Performance of Asphalt Pavement

The Production of Porous Asphalt Mixtures with Damping Noise Reduction and Self-Healing Properties through the Addition of Rubber Granules and Steel Wool Fibers

A Design Method on Durable Asphalt Pavement of Flexible Base on Anti-Rutting Performance and Its Application

Optimizing parameters for the preparation of low viscosity rubber asphalt incorporating waste engine oil using response surface methodology

Optimization and pavement performance of buton-rock-asphalt modified asphalt mixture with basalt-fibre

Performance Characterization of Recycled-Asphalt Pavement with Stabilized Rubber–Modified Asphalt Using Balanced Mix Design Method

Performance Evaluation of Dense Mixtures with Stabilised Rubber Modified Asphalt

The design and operation optimization for conductive rubber heated snow melting bridge deck pavement

Influence of preparation parameters on rheological properties and relation analysis of waste rubber modified bitumen mastic

Micro-structural analysis of noise reduction mechanism of porous asphalt mixture based on FEM

Principle analysis of the mix design and performance evaluation of the asphalt-filler volume equivalent substitution method