Abstract:We investigated laser-induced cavitation dynamics in a small container with elastic thin walls and free or partially confined surface both experimentally and by numerical investigations. The cuvette was only 8–25 times larger than the bubble in its center. The liquid surface was either free, or two thirds were confined by a piston-shaped pressure transducer. Different degrees of confinement were realized by filling the liquid up to the transducer surface or to the top of the cuvette. For reference, some experiments were performed in free liquid. We recorded the bubble dynamics simultaneously by high-speed photography, acoustic measurements, and detection of probe beam scattering. Simultaneous single-shot recording of radius-time curves and oscillation times enabled to perform detailed investigations of the bubble dynamics as a function of bubble size, acoustic feedback from the elastic walls, and degree of surface confinement. The bubble dynamics was numerically simulated using a Rayleigh-Plesset model extended by terms describing the acoustically mediated feedback from the bubble's environment. Bubble oscillations were approximately spherical as long as no secondary cavitation by tensile stress occurred. Bubble expansion was always similar to the dynamics in free liquid, and the environment influenced mainly the collapse phase and subsequent oscillations. For large bubbles, strong confinement led to a slight reduction of maximum bubble size and to a pronounced reduction of the oscillation time, and both effects increased with bubble size. The joint action of breakdown-induced shock wave and bubble expansion excite cuvette wall vibrations, which produce alternating pressure waves that are focused onto the bubble. This results in a prolongation of the collapse phase and an enlargement of the second oscillation, or in time-delayed re-oscillations. The details of the bubble dynamics depend in a complex manner on the degree of surface confinement and on bubble size. Numerical simulations of the first bubble oscillation provided a very good agreement with experimental data. They suggest that the alternating rarefaction/compression waves from breakdown-induced wall vibrations cause a prolongation of the first oscillation. By contrast, liquid mass movement in the cuvette corners result in wall vibrations causing late re-oscillations. The strong and rich interaction between the bubble and its surroundings may be relevant for a variety of applications such as intraluminal laser surgery and laser-induced cavitation in microfluidics.

Deflection of Cavitation Bubble Near the Rigid Wall with a Gas-Containing Hole

Cavitation bubble collapse in a vicinity of a rigid wall with a gas entrapping hole

Experimental analysis of particle dynamics influenced by cavitation bubbles near a rigid wall

Non-spherical Collapse of a Cavitation Bubble Induced by a Rigid Filament

Dynamics of a Laser-Induced Buoyant Bubble Near a Vertical Rigid Boundary

Investigations of the dynamical behaviors of a millimeter-scale cavitation bubble near the rigid wall

Experimental Investigations on the Cavitation Bubble Dynamics near the Boundary of a Narrow Gap

Experimental and numerical investigations of the collapse of a laser-induced cavitation bubble near a solid wall

Dynamic behavior of a single bubble between the free surface and rigid wall

Dynamic behaviors of a bubble near a rectangular wall with a bulge

A Comprehensive Study of the Impact Pressure Induced by a Single Cavitation Bubble Collapsing Near a Solid Wall

Dynamics of the Air Bubble on the Upper Surface of a Plate: Influences of the Cavitation Bubble

Laser induced spherical bubble dynamics in partially confined geometry with acoustic feedback from container walls

Study on Non-Spherical Deformation Velocity of a Single Cavitation Bubble

Experimental investigation of cavity stability for a gas-jet penetrating into a liquid sheet

Effect of low-frequency ultrasonic field at different power on the dynamics of a single bubble near a rigid wall

Experimental Study on Bubble Collapse Near a Solid Boundary

The direction of the microjet produced by the collapse of a cavitation bubble locatedin between a wall and a free surface

Investigation of cavitation bubble dynamics near a solid wall by high-resolution numerical simulation

Numerical investigation of the cavitation bubble near the solid wall with a gas-entrapping hole based on a fully compressible three-phase model

Numerical Investigation on the Collapse of a Bubble Cluster Near a Solid Wall