Abstract:Laser frequency combs, which are composed of a series of equally-spaced coherent frequency components, have triggered revolutionary progress for precision spectroscopy and optical metrology. Length/distance is of fundamental importance in both science and technology. In this work, we describe a ranging scheme based on chirped pulse interferometry. In contrast to the traditional spectral interferometry, the local oscillator is strongly chirped which is able to meet the measurement pulses at arbitrary distances, and therefore the dead zones can be removed. The distances can be precisely determined via two measurement steps based on time-of-flight method and synthetic wavelength interferometry, respectively. To overcome the speed limitation of the optical spectrum analyzer, the spectrograms are stretched and detected by a fast photodetector and oscilloscope, and consequently mapped into the time domain in real time. The experimental results indicate that the measurement uncertainty can be well within 2 $\upmu$m, compared with the reference distance meter. The Allan deviation can reach 0.4 $\upmu$m at averaging time of 4 ns, 25 nm at 1 $\upmu$s, and can achieve 2 nm at 100 $\upmu$s averaging time. We also measure a spinning disk with grooves of different depths to verify the measurement speed, and the results show that the grooves with about 150 m/s line speed can be clearly captured. Our method provides a unique combination of non-dead zones, ultrafast measurement speed, high precision and accuracy, large ambiguity range, and with only one single comb source. This system could offer a powerful solution for the field measurements in practical applications in future.

High-accuracy Photonics-assisted Frequency Measurement With Rough-accurate Compensation Based on Mach-Zehnder Interfering and Power Cancellation

Thin‐Film‐Lithium‐Niobate Photonic Chip for Ultra‐Wideband and High‐Precision Microwave Frequency Measurement

High Accuracy Microwave Frequency Measurement Based on Single-Drive Dual-Parallel Mach-Zehnder Modulator

High-Precision Photonics-Assisted Two-Step Microwave Frequency Measurement Combining Time and Power Mapping Method

Photonic Multiple Frequency Measurement with Phase Identification Based on Frequency Conversion

Broadband photonic frequency measurement based on the frequency-to-carrier phase-shifted mapping and finite extinction ratio

Photonic-Assisted Microwave Frequency Measurement System Based on A Silicon Orr

Pre-distortion Compensation for Optical-Based Broadband LFM Signal Generation System

Photonic Instantaneous Frequency Measurement with Digital Output Based on Dispersion Induced Power Fading Functions

Measurement Accuracy Improvement With Pzt Scanning For Detection Of Dpc In Hi-Bi Fibers

A Novel Method Based on Probability Density Function Used in Instantaneous Frequency Measurement System for Wider Range and Less Error

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

Instantaneous Microwave Frequency Measurement Using an Optical Phase Modulator

A PM-based Approach for Doppler Frequency Shift Measurement and Direction Discrimination

A Long-Haul and High-Accuracy Fiber Length Measurement Technology Based on Mach-Zehnder and Sagnac Hybrid Interferometer

Photonics-Assisted Frequency Conversion and Self-Interference Cancellation for In-Band Full-Duplex Communication

Wideband Anti-Interference Microwave Photonic Measurement for Doppler Frequency Shift and Angle of Arrival

Ultra-Wideband Instantaneous Frequency Measurement Based on Differential Photonic Time-Stretch

6–40 GHz Photonic Microwave Doppler Frequency Shift Measurement Based on Polarization Multiplexing Modulation and I/Q Balanced Detection

Photonics-assisted two-step microwave frequency measurement based on frequency-to-time mapping

Ultrafast and precise distance measurement via real-time chirped pulse interferometry