Abstract:The body size of the livestock is an important indicator for breeding and animal production, however, the traditional measurement of body size of the livestock is a hard manual operation and it is inaccurate, expensive and time-consuming. In the field of computer vision measurement, the location of the pig body size measurement points is an essential work. To solve the automatic extraction of pig body size measurement points based on point clouds, a method of automatic extraction of pig body size measurement points was developed based on rotation normalization approach. In order to acquire the measurement points of the livestock, several processing steps were applied, and the steps were as follows: (1) Random sample consensus algorithm was used to acquire the plane parameter of the ground and the ground calculated by the parameter was then removed. The target pig and the ground normal vector were acquired. (2) Since the livestock acquired was from different coordinate systems, we proposed a rotation normalization method. First, the method of principal component analysis was used to get the coordinate axis of data cloud of the pig body and the initial measuring coordinate system was obtained. Secondly, the direction of they axis was replaced by the direction of the ground normal vector acquired. The normal direction had 2 possibilities, that was, the normal vector was either pointing straight to the pig or going back away from the pig. The direction of the normal vector was determined by whether there was intersection between the constructed cuboid region and the pig. The cuboid region was constructed from the point on the ground along the normal vector. Finally, by using the geometrical relationship among the coordinate axis, standard measuring coordinate system defined in this paper was acquired. (3) Some of the measurement points of the livestock were usually the extreme points on the livestock body contour. By cutting the cloud points of the pig along thex axis direction with a step length, the slice data of the pig were acquired and the point cloud of contour line was obtained. By using the structural relation between the measurements points and the geometric feature of the measurement points either at the contour points or on the whole pig, the measurements points were calculated. Landrace sow specimens with 100 days old were selected as the experimental samples. To validate the rotation normalization performance of the proposed method, the scene point cloud including the specimen was used to evaluate the effects objectively. The point cloud was acquired by the 3D (three-dimensional) camera Xtion sensor using KinectFusion technology. Xtion is a sensor based on technology of structured light and consists of an infrared emitter, an infrared camera and an RGB (red, green, blue) camera. KinectFusion provides a function of 3D object scanning using a sensor. The results indicated that our approach could produce a reasonable rotation normalization result, and the directions of the length, height and width of the pig were basically consistent to the directions of thex,y andz axis. In order to verify the precision of measurement point's position, the proposed method was applied to locate the neck midpoint, body length measuring point, body width measuring point, body height measuring point and hip height measuring point. Average error of the results between the automatic extraction and artificial measurement of the selected points was less than 16 mm. The method in this paper can provide a reference for the automatic body measurement of the point cloud of the pig. This work is expected to be a useful contribution for animal production and breeding genetics.

Three-dimensional Point Cloud Reconstruction and Body Ruler Measurement of Pig Body under Multi-Angle KinectV2.

Point Cloud Reconstruction and Body Size Measurement of a Contactless Pig Body

Research on 3D Surface Reconstruction and Body Size Measurement of Pigs Based on Multi-View RGB-D Cameras

Research and Preliminary Evaluation of Key Technologies for 3D Reconstruction of Pig Bodies Based on 3D Point Clouds

Automated Method for Measuring Body Size Parameters of Live Pigs Based on Non-Rigid Registration of Point Clouds

RESEARCH ON PIG BODY SIZE MEASUREMENT SYSTEM BASED ON STEREO VISION

Extraction method of pig body size measurement points based on rotation normalization of point cloud

A Portable and Automatic Xtion-based Measurement System for Pig Body Size

3D SCANNING OF LIVE PIGS SYSTEM AND ITS APPLICATION IN BODY MEASUREMENTS

Pig Body Size Measurement Method Based on Mirror Reflection of Single Angle Point Cloud

A Study on the 3D Reconstruction Strategy of a Sheep Body Based on a Kinect v2 Depth Camera Array

Automatic livestock body measurement based on keypoint detection with multiple depth cameras

Estimation of Weight and Body Measurement Model for Pigs Based on Back Point Cloud Data

Automated Measurement of Heart Girth for Pigs Using Two Kinect Depth Sensors

An Approach of On-barn Pig Weight Estimation Via 3D Computer Vision by Kinect V2

An improved PointNet++ point cloud segmentation model applied to automatic measurement method of pig body size

A Comparison of Low-Cost Techniques for Three-Dimensional Animal Body Measurement in Livestock Buildings

Non-Contact Body Measurement for Qinchuan Cattle with LiDAR Sensor

Construction of Statistical Shape Model of Real Cattle and Its Application to Body Measurement

Web-based Method for Inspecting the Pig Body Size and Height Using Binocular Stereovision Technology

Body Weight Estimation for Pigs Based on 3D Hybrid Filter and Convolutional Neural Network