Abstract:Galvanized advanced high strength steels (AHSS) will be the most competitive structural material for automotive applications in the next decade. Oxidation of AHSS during the recrystalization annealing process in a continuous galvanizing line to a large extent influences the quality of zinc coating on the final galvanized steel product. For example, formation of oxides of alloying elements (e.g. Mn, Cr, Si) at the steel surface during annealing prior to galvanizing leads to poor adhesion of a zinc coating. Yet, knowledge on the high temperature oxidation behaviour of AHSS is rather limited. The primary aim of this thesis is to provide fundamental understanding on the kinetics of internal oxidation of AHSS during annealing. The classical Wagner internal oxidation theory for binary alloys was extended to account for multi-component alloys. To this end, a generic coupled thermodynamic-kinetic internal oxidation model based on Fick’s 1st law was developed in order to predict the kinetics of internal oxidation, as well as the concentration depth profiles of internal oxides and solute elements in alloy matrix, considering the finite solubility product of oxide precipitates, the non-ideal behaviour of solid solution and the formation of multiple type of oxide species. The internal oxidation behaviour of Fe-Mn and Fe-Mn-Cr steel alloys were experimentally studied to validate the model. It has been found that for Fe-Mn and Fe-Mn-Cr steel alloys, the effect of non-ideal behaviour of solution on internal oxidation is negligible, and local thermodynamic equilibrium is established within internal oxidation zone. Besides, the kinetics of Wustite formation on pure iron and Mn alloyed steels annealed in CO2 + CO or H2O + H2 gas mixtures as well as the reduction kinetics of the Wustite scale in Ar + H2 gas mixtures were investigated. The growth of Wustite scale on iron and Mn alloyed steels follows the linear rate law. However, adding Mn to iron, even at a relatively low concentration (say 1.7 wt%), dramatically lowers the growth rate of Wustite scale. Nevertheless, reduction kinetics of the Wustite scale on iron and Mn alloyed steels are almost the same. During the reduction process a dense iron layer is formed which separates the remaining Wustite scale from the reduction atmosphere. The rate of Wustite reduction by H2 is controlled by the diffusion of solute oxygen dissolved in the formed iron layer.

Fundamental Atomic-Scale Kinetic Models for the Oxidation of Iron/nickel-Based Alloys in Low-Density Supercritical Water

Corrosion Characteristics and Mechanisms of Typical Iron/nickel-Based Alloys in Reductive Supercritical Water Environments Containing Sulfides

The Oxidation of Fe/Ni Alloy Surface with Supercritical Water: A ReaxFF Molecular Dynamics Simulation

Oxidation Processes and Involved Chemical Reactions of Corrosion-Resistant Alloys in Supercritical Water

CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER

Modelling and Analysis of the Corrosion Characteristics of Ferritic-Martensitic Steels in Supercritical Water

Atomic insight into iron corrosion exposed to supercritical water environment with an improved Fe-H2O reactive force field

A Reactive Force Field Molecular Dynamics Simulation of Nickel Oxidation in Supercritical Water

Oxidation phenomena in advanced high strength steels : Modelling and experiment

Reactive molecular dynamics study of the oxidation behavior of iron‐based alloy in supercritical water

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO2-induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Acceleration of Oxidation Process of Iron in Supercritical Water Containing Dissolved Oxygen by the Formation of H2O2

Point Defect Model for the Corrosion of Steels in Supercritical Water: Part I, Film Growth Kinetics

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO 2 -induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Effect of Low Oxygen Concentration on the Oxidation Behavior of Ni-based Alloys 625 and 825 in Supercritical Water

Corrosion Behavior of Oxide Dispersion Strengthened Ferritic Steels in Supercritical Water

A High-Resolution Study of the Different Surface State Effects on the Corrosion Behaviors of a Ferritic Steel and an Austenitic Steel in Supercritical Water

ICOPE-15-C096 Cellular Automata Simulation for High Temperature Oxidation and Sulfuration of Water Wall Materials

Corrosion Characteristics and Mechanisms of Typical Ni-based Corrosion-Resistant Alloys in Sub- and Supercritical Water

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy

Predictions and Analyses on the Growth Behavior of Oxide Scales Formed on Ferritic–Martensitic in Supercritical Water