Abstract:A new jet fuel surrogate was developed in this work by emulating real jet fuel properties including physical, gas phase chemical properties and threshold sooting index (TSI). An intelligent optimization methodology was proposed to calculate the species composition that inherently satisfies both the physical and chemical characteristics as well as sooting tendency. Eight properties were selected as the target properties for the jet fuel surrogate development, including liquid density, viscosity, surface tension, cetane number (CN), hydrogen carbon (H/C) ratio, molecular weight (MW), lower heating value (LHV) and TSI. As a result, the CN, H/C ratio, LHV, TSI and density of the new jet fuel surrogate are reproduced excellently with very little deviations within 3%. The averaged deviation of viscosity is −6.318% and the deviations of MW is 9.776%. As the highest deviation among all properties, the averaged deviation of surface tension is 11.76%. Based on the newly developed jet fuel surrogate, a skeletal jet fuel surrogate mechanism with 5 components including decalin, n-dodecane, iso-cetane, iso-octane and toluene was developed. The skeletal jet fuel surrogate mechanism was significantly compacted into 74 species and 189 reactions by describing the chemistries for the oxidation of large molecules C4–Cn and small H2/CO/C1 molecules respectively, which makes it practical to be used for 3-D engine combustion simulations. The validations of ignition delay times present reasonable agreement between experiment and predictions over a wide range of equivalence ratios (0.5–2.0) and pressures (8–30 atm), except for a shift of negative temperature coefficient (NTC) region towards higher temperatures at Φ = 1.5, 20 atm: in the simulation the NTC region is from 830 K to 950 K while in the experiment the NTC region is from 740 K to 890 K. The predicted species concentrations can reproduce the trend of the experimental data, especially for O2, CO and CO2. The simulated laminar flame speed at 400 K and 470 K are with absolute averaged deviations of 3.5% and 4.06% respectively. The constant volume spray and combustion validations are reasonably good. In the engine combustion validations, a multistep soot model was embedded into the new jet fuel surrogate mechanism. The predicted in-cylinder pressure can reproduce the experimental data, expect for small deviations after the peak pressure (the averaged deviation is around 6.2% after the peak pressure). The embedded soot model can well reproduce the trend of the experimental data. It can be concluded that this new jet fuel surrogate mechanism is compact and robust for the utilization in diesel engine combustion simulation.

Detailed Combustion Kinetic Mechanism for a Jet Fuel Surrogate Composed of N-Decane, Iso-Cetane and M-Xylene: Construction and Validation

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

A merged kinetic mechanism study of two aviation surrogate fuels

Detailed combustion chemical mechanism for surrogates of representative jet fuels

Formulation of a Jet Fuel Surrogate and Its Kinetic Chemical Mechanism by Emulating Physical and Chemical Properties of Real Jet Fuel

Detailed chemical kinetic mechanism for surrogates of alternative jet fuels

Development of a Skeletal Mechanism for Tri-Component Diesel Surrogate Fuel: N-hexadecane/iso-cetane/1-methylnaphthalene

Development of Physical-Chemical Surrogate Models and Skeletal Mechanisms for the Combustion Simulation of Several Jet Fuels

A New Detailed Kinetic Model for Surrogate Fuels: C3MechV3.3

Development of a Skeletal Mechanism for Aviation Kerosene Surrogate Fuel

A New Jet Fuel Surrogate Formulated by Emulating the Distribution of Pyrolysis Products Obtained from Shock Tube Experiments

Development of a surrogate and its comprehensive compact chemical kinetic mechanism for the combustion of Alcohol-To-Jet fuel

Chemical kinetic simulation of kerosene combustion in an individual flame tube

Surrogate Fuel Development Based on Droplet Combustion: Comparison of Multi-component Mixtures with an Aviation Fuel

Modeling Chemical Mechanism for Surrogate Jet Fuel under Scramjet Operating Conditions

Development of a 5-Component Gasoline Surrogate Model Using Recent Advancements in the Detailed H2/O2/CO/C1-C3 Mechanism for Decoupling Methodology

Combustion Mechanism of N-Decane at High Temperatures and Kinetic Modeling of Ignition Delay for Aviation Kerosene

A Multi-Component Wide Distillation Fuel (covering Gasoline, Jet Fuel and Diesel Fuel) Mechanism for Combustion and PAH Prediction

Insights into the Effects of Mechanism Reduction on the Performance of N-Decane and Its Ability to Act As a Single-Component Surrogate for Jet Fuels

A Bio-Diesel Chemical Kinetic Mechanism Based on Decoupling Methodology and Detailed H-2/O-2/CO/C-1 similar to C-3 Mechanism

An Experimental and Kinetic Modeling Study of a Four-Component Surrogate Fuel for RP-3 Kerosene