Abstract:With a high proportion of distributed photovoltaic generation connected to a distribution network, reverse power flow might occur, and node voltages might be out of limit. Therefore, determining a distribution system's maximum acceptance capacity for distributed photovoltaics is crucial. Many existing studies widely agree that distributed photovoltaics possess the ability to increase voltage when connected at the end of the supply line within the distribution system. However, the impact of different types of loads on the carrying capability of distributed photovoltaic integration was not considered during these computations, which affects their accuracy in determining the maximum penetration capacity of a distributed photovoltaic network. Therefore, this paper investigates the acceptance capability of distribution networks with different types of loads on distributed photovoltaics. First, the static voltage characteristics and power factor variation characteristics of different load components were analyzed, so then, the setting method of active and reactive power were clarified based on the changes in the load power in a day. Next, the IEEE 33 node system is taken as an example. From the perspective of whether the voltage of the distribution system nodes is in excess of the system limit, the acceptance capability of different types of loads to carry distributed photovoltaics was analyzed. The simulation results show that the heavy industrial load has the greatest ability to accept distributed photovoltaics, followed by the light industrial load, and that residential load has the smallest capacity. From the simulation results, we conclude that the greater the high-power time period of the load overlaps with the high-power time period of distributed photovoltaics is, the stronger its ability to accept distributed photovoltaics.

Calculation Method of Maximum Load Ratio of Transformer Considering Distributed PV and Storage

Method for Estimating the Total Distributed Photovoltaic Generation Power in a Load Region

Acceptance Capability of Distributed Photovoltaic Generation in Distribution Networks Considering Different Loads

Evaluating Maximum Photovoltaic Integration in District Distribution Systems Considering Optimal Inverter Dispatch and Cloud Shading Conditions

Estimation of Capacity Ratios Between Grid-forming and Grid-following Converters for Improving the Stability of Renewable Energy Stations

Mitigation of Distribution Transformer Overloading with Rolling-Horizon Optimization of Vehicle-to-Grid Resource

Calculation Method for Maximum Accommodation Capacity of Distributed Photovoltaic in Distribution Network Considering Various Electrical Constraints

Calculation Methodfor Incremental 'coal to Electricity' Load and Corresponding Average Distribution Transformer Capacity

Calculation of the Maximum Hosting Capacity of Distributed Photovoltaics in Distribution Networks Considering Flexible Interconnections

Demand Calculation Method of Energy Storage in High-Proportion New Energy Power System Frequency Regulation Based on Variational Modal Decomposition

Computing the Maximum Penetration Level of Multiple Distributed Generators in Distribution Network Taking into Account Voltage Regulation Constraints

Energy Storage Configuration Method for Distribution Networks Based on Moment Difference Analysis

A Method for Optimal Allocation of Distributed PV and Energy Storage Based on High Reliability of Distribution Network

An integrated approach to improving the ability of power systems to accept distributed PV

Optimal Planning of Energy Storage in Distribution Feeders Considering Economy and Reliability

Optimal Dispatch with Transformer Dynamic Thermal Rating in ADNs Incorporating High PV Penetration

Research On Hybrid Energy Storage Configuration In Industrial Estate

Assessment on Maximum Effective Photovoltaic Integration in Active Distribution Network

Identification of transformer overload and new energy planning for enterprises based on load forecasting

Optimization for Transformer District Operation Considering Carbon Emission and Differentiated Demand Response

Access Capacity Analysis Considering Correlation of Distributed Photovoltaic Power and Load