Abstract:A bio-inspired nanofibrous Co3O4/TiO2/carbon composite was fabricated using natural cellulose substrate (laboratory filter paper) as both the carbon source and the structural scaffold. Employing a surface sol -gel process to form a thin TiO2 gel layer coating on each cellulose nanofiber of the filter paper, the resulted composite sheet was successively carbonized in inert atmosphere to give a nanofibrous TiO2/carbon composite; afterwards, nano-sized Co3O4 particles (10-30 nm) were uniformly deposited onto the yielded composite fibers via a simple hydrothermal method, resulting in the Co3O4/TiO2/carbon hybrid. The ternary composite possessed a unique hierarchically three-dimensional porous structure which inherited precisely from the initial filter paper. This special structure with the internal conductive carbon fiber and the external nano-sized Co3O4 particles offered the nanocomposite with an excellent electrochemical performance as anodic material for lithium-ion batteries. The optimal sample with a Co3O4 mass content of 50.6% delivered an initial discharge capacity of 1239 mAh g(-1) at a current density of 100 mA g(-1), which was far exceeded the theoretical capacity of Co3O4. The extra capacity is ascribed to the additional lithium storage sites provided by the large specific surface area of the composite, and the formation of the solid electrolyte interface (SEI) layer in the initial discharge process causing a large consumption of Li+ which results in some irreversible capacity. And after 200 discharge/charge cycles, a high reversible capacity of 764 mAh g(-1) was maintained, which is higher than most of the Co3O4/carbon hybrid materials reported. This work provided a simple and efficient strategy for designing and preparing nanoscale metal-oxide/carbon composite material with considerable potential in energy storage and conversion. (C) 2019 Elsevier B.V. All rights reserved.

Fabrication and electrochemical performance of micro-nanostructured C/TiO2/CuMoO4 fibrous composite based on natural cellulose

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

MoC@Cu@C Composites with Structural Advantages Exhibit Excellent Electrochemical Performance and Stability in LIBs

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Porous nanocomposites by cotton-derived carbon/NiO with high performance for lithium-ion storage

Carbon Nanofibers Decorated by MoS2 Nanosheets with Tunable Quantity as Self-Supporting Anode for High-Performance Lithium Ion Batteries

Nickel-Sulfide/Vanadium-Sulfide/Carbon Composite Nanofibers for Lithium-Ion Storage

Metal–Organic Framework-Structured Porous ZnCo 2 O 4 /C Composite Nanofibers for High-Rate Lithium-Ion Batteries

A Bio-Inspired Nanofibrous Co3O4/TiO2/carbon Composite As High-Performance Anodic Material for Lithium-Ion Batteries

Three-dimensional TiO2 Nanotubes Immobilized with Fe2O3 Nanoparticles As an Anode Material for Lithium-Ion Batteries

Trimetallic MOF-Derived Cu0.39Zn0.14Co2.47O4-CuO Interwoven with Carbon Nanotubes on Copper Foam for Superior Lithium Storage with Boosted Kinetics

Nanocrystalline Cellulose-Supported Iron Oxide Composite Materials for High-Performance Lithium-Ion Batteries

Preparation of carbon‐coated Fe2O3@Ti3C2Tx composites by mussel‐like modifications as high‐performance anodes for lithium‐ion batteries

Multi‐Pleated Alkalized Ti3C2Tx MXene‐Based Sandwich‐Like Structure Composite Nanofibers for High‐Performance Sodium/Lithium Storage

Fabrication of cactus-like CNT/SiO2/MoO3 ternary composites for superior lithium storage

The enhanced performance of Li-ion batteries based on Co-MOF/MXene composites

Synthesis of Fe3O4@C Composites Using Cellulose and Ferric Tartrate Complex as Precursor and Their Application as Anode for High Performance Lithium-Ion Batteries

A Cellulose-Derived Nanofibrous MnO2-TiO2-Carbon Composite As Anodic Material for Lithium-Ion Batteries

NiCo2O4/biomass-derived carbon composites as anode for high-performance lithium ion batteries

3D TiO2@nitrogen-doped carbon/Fe7S8 composite derived from polypyrrole-encapsulated alkalized MXene as anode material for high-performance lithium-ion batteries

In-situ construction of Ti3C2TX/Ni-HHTP heterostructure as anode for lithium-ion batteries