Abstract:In recent years, with the rapid development of tiny electronic components. At present, commonly used optical inspection technology and electron microscope inspection technology find it difficult to meet the dimensional inspection requirements of key components of highly integrated integrated circuits. Based on computer micro-vision technology, the coupling of measuring platform displacement to the development of miniature electronic components is of great significance for the analysis and design of precision platforms. This paper analyzes the influence of the three factors of material, software and environment on the accuracy positioning of the measurement system. The analysis shows that the characteristics of the imaging system itself and the image noise it brings are the main factors that affect the measurement accuracy. In this paper, a technique for blindly detecting the position of the scanner based on computer vision is proposed. This article uses a CCD optical camera to capture the orbital motion of the electronic pen, and uses video image processing algorithms, computer vision and position to capture the position of the light on the screen. With the support of specific software, this article creates a new interactive whiteboard system. Any large screen can be turned into a large touch screen with electronic writing surface and touch function. The device does not require a specific additional screen to operate, and the cost is lower. In this paper, the stereo microscope has a narrow field of view, small depth of field and many non-linear factors. Based on the analysis of existing camera models, a binocular microscope imaging model based on a linear camera is established. On this basis, through the experimental analysis of the feasibility of the existing camera calibration method in the binocular microsystem, the calibration method of the camera's main parameters is proposed. Experiments show that the resolution value of the peak value of the evaluation curve in this paper is 18 times the focus resolution value, while the commonly used algorithm for evaluating the peak value of the curve is only 14 times. Compared with the latter, the discrimination of the edge gradient Laplacian used in this paper is more obvious than the former.

The Study of Optical Feature Point Imaging Gray Value Automation Control Method with Movement

Human vision based autofocus for digital cameras

A NEW AUTOFOCUSING TECHNIQUE BASED ON ANALYSING THE RGB COMPONENTS OF COLOR IMAGES

An Adjustable Coverage Range Autofocus Evaluation Function Using Gradient Operator with Variable Frequency

Study of Optical Characteristic Point Luminance Control Method

Design and Optimization for Microscope Autofocus Systems Based on the Analysis of Video Signals

Fast Auto-Focus Scheme Based on Optical Defocus Fitting Model

Application of digital image processing in three colors' auto-focusing and auto-alignment of projection display

Hybrid vision control apply on automatic pneumatic micromanipulation system

An Image Motion Compensation Control Method for the Dynamic Scan and Stare Imaging System

Research on auto-focusing system based on image processing

A New Auto-focusing Algorithm for Optical Microscope Based Automated System.

Camera Attributes Control for Visual Odometry With Motion Blur Awareness

Algorithm Of Single Camera Vision Coordinates Measuring Based On Features Imaging Of Optical Probe

A Study on Image Type Automatic Aiming System

Coarse-to-Fine Adaptive Illumination Hard-Adjustment for Vision Inspection System under Uncertain Imaging Conditions

Study on electronic control system for laser scanning confocal fluorescence microscope

Positioning Technology of Tiny Electronic Components Based on Microscope and Computer Vision

An Auto-Focusing Method Based On Image Processing Technique

An Image Auto-Focusing Algorithm for Industrial Image Measurement

A Method of Auto-Focusing Based on Fuzzy-Control