Abstract:Soft robots have unique advantages over traditional rigid robots and have broad application prospects in many fields, such as pipe inspections. Several of the reported pipe-crawling soft robots have long actuation periods and small locomotion speeds. Moreover, they lack active steering property to adapt to complex piping systems, such as T-shaped pipes. To solve the above problems, this paper proposes a novel parallel-pipe-crawling pneumatic soft robot consisting of three extensible pneumatic soft actuators and two flexible feet. The parallel structure and flexible feet allow the robot to reduce the number of steps in a crawling cycle. The extensible actuator allows the robot to change its body shape for active steering property. However, a complete mathematical model for soft robots with parallel structure is hard to establish. In this paper, the phenomenological modeling method is used to realize a mathematical model with high precision, limited calculation, and easy engineering applicability of the pipe-crawling soft robot. Then, the prototype of the robot is fabricated with the optimal structural parameters selected by finite element simulations. The static identification experiment shows that the average errors of the extended length and output force are 0.51 mm and 0.28 N, respectively. The crawling experiments in various scenarios show that the horizontal crawling speed is higher than 15 mm/s, the maximum load is 2.456 kg, and the minimum turning radius is 38.2 mm. The robot shows great potential for inspecting in complex pipes with high crawling efficiency, excellent flexibility, and strong adaptability by switching its crawling gaits.

Mechanical Analysis of Superheater Pipe Detection Robot

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

An Underwater Robot with Self-Adaption Mechanism for Cleaning Steel Pipes with Variable Diameters

Analysis of the Motion Mechanism of Actively Spirally Driven Pipe Robot

Structural and Passability Analysis of Dual Detection Mode Pipeline Robot

Conceptual Design and Analysis of Pipe Climbing Robot

Design of Mobile Robot for Slotted Pipeline Detection

Design and analysis of a wall‐climbing robot for water wall inspection of thermal power plants

Design and Motion Performance of New Inspection Robot for Steam Generator Heat Transfer Tubes

Control Strategy of Pipeline Robot

Development of Ray Nondestructive Detecting and Grinding Robot for Weld Seam in Pipe

Design and analysis of a pipe robot based on metamorphic mechanism

A Cleaning Robot for the Pipe Ventilation System of a Central Air-conditioner

Mechanism and Simulation Analysis of Mechanical Self-adaptive Pipe-Robot

Design and Kinematic Characteristic Analysis of a Spiral Robot for Oil and Gas Pipeline Inspections

Kinematic Analysis of a Wheeled-Leg Small Pipeline Robot Turning in Curved Pipes

Design and Modeling of a Parallel-Pipe-Crawling Pneumatic Soft Robot

Research on a Tubular Climbing Robot Induced by Tri-tube Soft Actuators

Structure Design and Characteristic Analysis of Compound-Driven Unit for Pipeline Robot

Design on Robot’s Software System for Outer Surface Inspection of Boiler Pipeline

Design Method of Modular Units for Articulated in-Pipe Robot Inspecting System