Abstract:We present and propose a complete and iterative integrated-circuit and electro-magnetic (EM) co-design methodology and procedure for a low-voltage sub-1 GHz class-E PA. The presented class-E PA consists of the on-chip power transistor, the on-chip gate driving circuits, the off-chip tunable LC load network and the off-chip LC ladder low pass filter. The design methodology includes an explicit design equation based circuit components values' analysis and numerical derivation, output power targeted transistor size and low pass filter design, and power efficiency oriented design optimization. The proposed design procedure includes the power efficiency oriented LC network tuning, the detailed circuit/EM co-simulation plan on integrated circuit level, package level and PCB level to ensure an accurate simulation to measurement match and first pass design success. The proposed PA is targeted to achieve more than 15 dBm output power delivery and 40% power efficiency at 433 MHz frequency band with 1.5 V low voltage supply. The LC load network is designed to be off-chip for the purpose of easy tuning and optimization. The same circuit can be extended to all sub-1 GHz applications with the same tuning and optimization on the load network at different frequencies. The amplifier is implemented in 0.13 μm CMOS technology with a core area occupation of 400 μm by 300 μm. Measurement results showed that it provided power delivery of 16.42 dBm at antenna with efficiency of 40.6%. A harmonics suppression of 44 dBc is achieved, making it suitable for massive deployment of IoT devices.

Study on a $0.13-\Upmu \mathrm{m}$ CMOS Class-E 2.4 GHz Adjustable Power Amplifier for IoT Application

A High-Efficiency Low-Voltage Class-E PA for IoT Applications in Sub-1 GHz Frequency Range

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

Fully integrated pseudo differential K-band power amplifier in 0.13um standard CMOS

A 100–117 GHz W-Band CMOS Power Amplifier With On-Chip Adaptive Biasing

Design of CMOS Class-E Power Amplifier for Low Power Applications

A 2.4-Ghz 0.18μm Full-CMOS Single-Stage Class-E Power Amplifier with Temperature Effect for ISM Band Wireless Communication

A 22.8 GHz to 32.8 GHz Compact Power Amplifier with a 15 Dbm Output P1dB and 36.5% Peak PAE in 65-Nm CMOS.

0.18Μm CMOS Low Voltage Power Amplifier for WSN Application

Design of 2.4GHz Two Stages Cascode Class E Power Amplifier for Wireless Application

A 1.1 ∼ 2.9 GHz High Efficiency CMOS Power Amplifier

A 900mhz, 20dbm, 40% PAE Single-Ended CMOS Class E Power Amplifier Integrated in an UHF RFID Reader

A 0.2–2.5 GHz CMOS Power Amplifier Using Transformer-Based Broadband Matching Network

A 60 GHz Dual-Mode Power Amplifier with 17.4 Dbm Output Power and 29.3% PAE in 40-Nm CMOS

A 900 MHz,21 Dbm CMOS Linear Power Amplifier with 35% PAE for RFID Readers

A 5ghz Power Amplifier Implement in 0.18 Μm CMOS Technology

0.13&Amp;#x00b5;m CMOS Power Amplifier for Wireless Sensor Network Applications

A 54-Ghz 23.3%-PAE CMOS Power Amplifier Using Dual-Gated Transistors

2.4-GHz 0.18-μm CMOS highly linear power amplifier

A 60-Ghz Dual-Mode Class Ab Power Amplifier in 40-Nm Cmos

A 2.45ghz CMOS Power Amplifier with High Linearity