Abstract:To study the vibration characteristics of a high-speed railway continuous girder bridge-track coupling system (HSRCBT), a coupling vibration analysis model of an m-span continuous girder bridge-subgrade-track system with n-span approach bridge was established. The model was based on the energy and its variational method, where both the interlaminar slip and shear deformation effects were considered. In addition, the free vibration equations and natural boundary conditions of the HSRCBT were derived. Further, according to the coordination principle of deformation and mechanics, an analytical method for calculating the natural vibration frequencies of the HSRCBT was obtained. Three typical bridge-subgrade-track coupling systems of high-speed railway were taken and the results of finite element analysis were compared to those of the analytical method. The errors between the simulation results and calculated values of the analytical method were less than 3%, thus verifying the analytical method proposed in this paper. Finally, the analytical method was used to investigate the influence of the number of the approach bridge spans and the interlaminar stiffness on the natural vibration characteristics of the HSRCBT based on the degree of sensitivity. The results suggest the approach bridges have a critical number of spans and in general, the precision requirements of the analysis could be met by using 6-span approach bridges. The interlaminar vertical compressive stiffness has very little influence on the low-order natural vibration frequency of HSRCBT, but does have a significant influence on higher-order natural vibration frequency. As the interlaminar vertical compressive stiffness increases, the degree of sensitivity to interlaminar stiffness of each of the HSRCBT natural vibration characteristics decrease and gradually approach zero.

Research on Numerical Solution Algorithm for Real‐time Hybrid Simulation of High‐speed Railway on Suspension Bridge

Adaptive Compound Control for the Real‐time Hybrid Simulation of High‐speed Railway Train–bridge Coupling Vibration

Adaptive compensation method for real-time hybrid simulation of train-bridge coupling system

Real-time Hybrid Simulation of High-Speed Train-Track-bridge Interactions Using the Moving Load Convolution Integral Method

Off-Line Hybrid Simulation Method on Train–Track–Bridge Coupling Vibration in High-Speed Railway

Dynamic responses of railway suspension bridges under moving trains

A Hybrid Solution for Studying Vibrations of Coupled Train–track–bridge System

A Novel Moving Load Integration Method for Real-Time Hybrid Shaking Table Test of High-Speed Maglev Vehicle–Bridge Interaction System

Moving Safety Evaluation of High-speed Train on Post-earthquake Bridge Utilizing Real-time Hybrid Simulation

Disturbance rejection control in real-time hybrid simulation of vehicle-bridge coupling vibration

An Efficient Non-Iterative Hybrid Method for Analyzing Train–Rail–Bridge Interaction Problems

A real-time co-simulation solution for train-track-bridge interaction

An Efficient Hybrid Algorithm for Dynamic Analysis of Train-Track-Bridge Coupled System Based on Separation Iterative Method and Coupled Time-Varying Method

A Machine Learning Based Approach for Efficient Safety Evaluation of the High Speed Train and Short Span Bridge System

A Real-Time Hybrid Testing Method for Vehicle-Bridge Coupling Systems

Numerical modeling and simulation on seismic performance of high-speed railway bridge system

A Fast Hybrid Algorithm for the Random Vibration Analysis of Train-Bridge Systems under Crosswinds

Pseudodynamic Hybrid Simulation Of High-Speed Railway Bridge-Track System With Rotational Friction Damper

Simulation and Analysis of Coupled Vibration of Monorail Train-bridge-road Vehicle System

High-speed train–track–bridge dynamic interactions – Part I: theoretical model and numerical simulation

An Analytical Solution to the Vibration Characteristics for Continuous Girder Bridge-Track Coupling System and Its Application