Abstract:As potent fluorinated greenhouse gases, refrigerants need to be recovered and reclaimed in a timely manner to reduce greenhouse gas emissions. R-410A (50 wt % R-32 (difluoromethane) + 50 wt % R-125 (pentafluoroethane)) and R-513A (44 wt % R-134a (1,1,1,2-tetrafluoroethane) + 56 wt % R-1234yf (2,3,3,3-tetrafluoroprop-1-ene)) were azeotropic refrigerant mixtures that were difficult to separate by conventional distillation. Two ionic liquids (ILs), 1-ethyl-3-methylimidazolium perchlorate ([EMIM][ClO4]) and 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([EMIM][FSI]), had been considered as promising extractants in the extractive distillation. Solubilities of R-32, R-125, R-134a, and R-1234yf in [EMIM][ClO4] and [EMIM][FSI] were measured from 288.15 to 308.15 K and correlated well with the five-parameter nonrandom two-liquid (NRTL) activity coefficient model. Henry’s law constants and ideal selectivities (S I) of [EMIM][ClO4] and [EMIM][FSI] were used to compare absorption and separation performance with ILs in the literatures. Surface shielding charge distributions of the refrigerants and anions were used to analyze the absorption and separation mechanism. R-410A and R-513A separation processes using four ILs ([EMIM][ClO4], [EMIM][FSI], 1-ethyl-3-methy-limidazolium thiocyanate ([EMIM][SCN]), and 1-ethyl-3-methy-limidazolium acetate ([EMIM][Ac])) were simulated and evaluated. Results showed that R-32 and R-134a formed higher peak heights in the hydrogen bond donor region than R-125 and R-1234yf, which resulted in higher solubilities of R-32 and R-134a than R-125 and R-1234yf in both ILs. At 298.15 K, the S I of [EMIM][ClO4] for R-32 + R-125 (11.30) and [EMIM][FSI] for R-134a + R-1234yf (8.01) were both the highest to date. [SCN] formed peaks in nonpolar and polar regions with only half the value of [ClO4], which led to the highest S I of [EMIM][ClO4] for R-32 + R-125. The total annual cost (TAC) using [EMIM][ClO4] (14.1362 × 104 $) in R-410A separation was less than that of [EMIM][SCN] (18.1249 × 104 $). Moreover, the TAC of [EMIM][FSI] (13.9365 × 104 $) and [EMIM][Ac] (13.5974 × 104 $) were close for R-513A separation, because the noncompetitive selectivity (S p) of [EMIM][Ac] at high pressures was higher than that of [EMIM][FSI]. [EMIM][ClO4] and [EMIM][FSI] were proved to be efficient extractants for the separation of R-410A and R-513A, respectively.

Preparation of Zif-8@[C2mim][Bf4] Mixed Matrix Membranes for Enhancing the Separation of R32 from R410a

Preparation of ZIF-8@[C2mim][BF4]/Pebax Mixed-Matrix Membranes Through a Impregnation Strategy for Enhancing the Separation of Difluoromethane (R32) from Refrigerant Blend R410A

Fluorinated ZIF-71 with adjusted pore size to enhance separation performance of mixed matrix membrane for recovering R32 from R410A

Amino and Ionic Liquid Modified ZIF-71 Embedded Mixed Matrix Membrane for the Enhancing the Separation of Refrigerant R454A

Mixed Matrix Membranes for C2H4/C2H6 Separation Using a Phosphate Anion-Pillared Microporous Material

Extractive Distillation Process Using Organic and Ionic Liquids for the Separation of High-Gwp Refrigerant R410A: A Thermodynamic and Techno-Economic Assessment

Absorption Separation of Hydrofluorocarbon/Hydrofluoroolefin Refrigerant Mixtures Using Ionic Liquids

Simultaneous enhancement of mechanical properties and CO2 selectivity of ZIF-8 mixed matrix membranes: Interfacial toughening effect of ionic liquid

Enhancing R410A Blend Separation by Using Ionic Liquids: from UNIFAC Model Extension, Solvent Design to Molecular Dynamics Simulation

Mixed Matrix Membranes Incorporating Amino-Functionalized ZIF-8-NH2 in a Carboxylic Polyimide for Molecularly Selective Gas Separation

Investigation on Absorption and Separation Performance of R-32, R-125, R-134a, and R-1234yf Refrigerants Using EMIM-Based Ionic Liquids

Phenolic resin regulated interface of ZIF-8 based mixed matrix membrane for enhanced gas separation

COSMO-RS guided screening of ionic liquids for the separation of fluorinated greenhouse gases R-410A: Delving into anion, cation effects, and hydrogen bond dynamics

Sub-Zero Temperature Synthesis of Pressure-Resistant ZIF-8 Membrane with Superior C3H6/C3H8 Separation Performance

Ionic Liquids Based Azeotropic Separation of Refrigerants R410A (R32+R125) and R508B (R23+R116) Through Hybrid Extractive Distillation

Enhanced gas separation performance of Pebax mixed matrix membranes by incorporating ZIF-8 in situ inserted by multiwalled carbon nanotubes

Enhanced H 2 /CO 2 separation of ZIF-8/NPBI mixed matrix membranes by forming cross-linking networks and crystal defects via acid doping

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO2 separation

Pod-like TA-ZIF-8/TCOH composite filler for the preparation of mixed matrix membrane for efficient CO2 separation

6FDA-polyimide thin-film composite hollow fiber membranes for hydrofluorocarbons and CO2 separations

Highly durable ZIF-8 tubular membranes via precursor-assisted processing for propylene/propane separation